As an Amazon Associate I earn from qualifying purchases.

Pot life at 95°f 35°c is 15 to 20 minutes. Provides about twice the working time of 206 slow hardener. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid.
Not intended for clear coating. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications. 209 extra slow hardener is a low-viscosity epoxy curing agent. Reaches maximum strength at 72°f in 4 to 9 days Minimum recommended working temperature is 70°F 21°C. 209 extra slow hardener produces a slow epoxy cure that develops physical properties gradually at room temperature.


Penetrating wood sealer: an ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Choose the right epoxy kit size for your project: both formulas are available in Pint, Half-Gallon, Quart, and Gallon sizes.
Clear low viscosity resin with many uses: use on all softwoods, particle board, oak, including cedar, maple, and teak. Wood rot repair epoxy available in two formulas: choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps Do not use Cold Weather formula above 65 F. Makes finishes like paint and varnish stick better and last longer. Use on all hardwoods, cypress, fir, and OSB.




Use on all hardwoods, live edge slabs, and OSB. Wood hardener for rotted wood: two-part epoxy system seals, preserves, hardens, and protects all types of wood by stopping rot.
Seal bare or new wood to protect against damage. Penetrating wood sealer: an ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Wood rot repair epoxy available in two formulas: choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps Do not use Cold Weather formula above 65 F.

Versatile application: This table top epoxy resin is designed primarily for application over bare or stained wood substrates. Tips and tricks: uncured our resin epoxy can be cleaned up with lacquer thinner; Cured product can be removed with paint stripper.
1. West System
#ad
FILLER LOW DENSITY 14 LB
#adWest System #ad - Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. 407 low-density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy.More information #ad
Cures to a dark red/brown color. You can blend it into any west system 105 resin/20x hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.Brand | West System #ad |
Manufacturer | Gougeon Brothers, Inc. #ad |
Height | 14 Inches |
Length | 22 Inches |
Weight | 1 Pounds |
Width | 17 Inches |
Part Number | 407-B |
Model | 407-B |
More information #ad
2. West System
#ad
West System 209-SC Extra Slow Hardener 1.45 gal
#adWest System #ad - Cure to a solid state at 95°F 35°C in 6 to 8 hours. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209's pot life at 72°f 22°c is 40 to 50 minutes. Blend with with west system 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio.Pot life at 95°f 35°c is 15 to 20 minutes. Provides about twice the working time of 206 slow hardener. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid.
More information #ad
Cures to a solid state at 72°F 22°C in 20 to 24 hours. Pair with west system 105-c epoxy resin. Use with west system 105 resin for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Not intended for clear coating. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications. 209 extra slow hardener is a low-viscosity epoxy curing agent. Reaches maximum strength at 72°f in 4 to 9 days Minimum recommended working temperature is 70°F 21°C. 209 extra slow hardener produces a slow epoxy cure that develops physical properties gradually at room temperature.
Brand | West System #ad |
Manufacturer | Gougeon Brothers, Inc. #ad |
Height | 12.5 Inches |
Length | 6 Inches |
Weight | 14.5 Pounds |
Width | 11 Inches |
Part Number | 209-SC |
More information #ad
3. West System
#ad
FILLER LOW DENSITY 12 OZ
#adWest System #ad - You can blend it into any west system 105 resin/20x hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Cures to a dark red/brown color. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair.More information #ad
407 low-density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty.Brand | West System #ad |
Manufacturer | WEST SYSTEM #ad |
Height | 16 Inches |
Length | 21 Inches |
Weight | 1 Pounds |
Width | 11.25 Inches |
Part Number | 407-15 |
Model | 407-15 |
Warranty | Limited Warranty |
More information #ad
4. TotalBoat
#ad
Traditional, TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration Gallon
#adTotalBoat #ad - Use on butcher block, mahogany, live edge slabs, including ipe, plywood, pine and redwood. Wood hardener for rotted wood: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time.Penetrating wood sealer: an ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Choose the right epoxy kit size for your project: both formulas are available in Pint, Half-Gallon, Quart, and Gallon sizes.
More information #ad
Easy cleanup with soap and water. Easy to use treatment has no VOCs or harsh fumes. Seal bare or new wood to protect against damage. Clear low viscosity resin with many uses: use on all softwoods, particle board, oak, including cedar, maple, and teak. Wood rot repair epoxy available in two formulas: choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps Do not use Cold Weather formula above 65 F. Makes finishes like paint and varnish stick better and last longer. Use on all hardwoods, cypress, fir, and OSB.
Brand | TotalBoat #ad |
Manufacturer | TotalBoat #ad |
Weight | 13.5 Pounds |
Part Number | 418615 |
Model | B00J36WRRQ |
More information #ad
5. West System
#ad
New Handy Repair Pack West System 101 Repair Pack
#adWest System #ad - Contains two west system 105 resin/205 fast Hardener packets, and enough adhesive filler to complete a variety of coating and bonding operations. Everything you need to complete small repairs around the boat, shop or home. Included components: urea-resin-adhesives. West system.More information #ad
Brand | West System #ad |
Manufacturer | Boating Accessories #ad |
Height | 9 Inches |
Length | 12 Inches |
Weight | 0.2 Pounds |
Width | 11 Inches |
Part Number | WSY 101 |
Model | 4330117217 |
Warranty | EMW1832047 |
More information #ad
6. West System
#ad
West System 407-5 Low Density Filler 4 oz
#adWest System #ad - You can blend it into any west system 105 resin/20x hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. 407 low-density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy.More information #ad
Cures to a dark red/brown color. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty.Brand | West System #ad |
Manufacturer | Gougeon Brothers, Inc. #ad |
Height | 10 Inches |
Length | 36 Inches |
Weight | 0.1 Pounds |
Width | 17 Inches |
Part Number | 407-5 |
Model | CECOMINOD050909 |
More information #ad
7. West System
#ad
West System 406-7 Collodial Silica 5.5oz
#adWest System #ad - 406 colloidal silica is an epoxy thickening additive used to control the viscosity of the epoxy. Prevents epoxy runoff in vertical and overhead joints. Can be used to improve strength, abrasion resistance, and consistency of epoxy fairing compounds. Cures to an off-white color.More information #ad
Brand | West System #ad |
Manufacturer | WEST SYSTEM #ad |
Height | 11.25 Inches |
Length | 21 Inches |
Weight | 0.34 Pounds |
Width | 16 Inches |
Part Number | 406-7 |
Model | 406-7 |
Warranty | Limited Warranty |
More information #ad
8. TotalBoat
#ad
Traditional, TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration Quart
#adTotalBoat #ad - Easy to use treatment has no VOCs or harsh fumes. Makes finishes like paint and varnish stick better and last longer. Clear low viscosity resin with many uses: use on all softwoods, and teak. Use on butcher block, plywood, fir, cypress, oak, maple, mahogany, particle board, including cedar, including ipe, pine and redwood.Use on all hardwoods, live edge slabs, and OSB. Wood hardener for rotted wood: two-part epoxy system seals, preserves, hardens, and protects all types of wood by stopping rot.
More information #ad
Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water. Choose the right epoxy kit size for your project: both formulas are available in Pint, Half-Gallon, Quart, and Gallon sizes. Seal bare or new wood to protect against damage. Penetrating wood sealer: an ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Wood rot repair epoxy available in two formulas: choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps Do not use Cold Weather formula above 65 F.
Brand | TotalBoat #ad |
Manufacturer | TotalBoat #ad |
Part Number | 403795 |
Model | 403795 |
More information #ad
9. System Three
#ad
Clear, 3 Quart, System Three Mirror Coat BarTop Epoxy Resin Coating
#adSystem Three #ad - Easy to apply: our self leveling epoxy creates a hard, clear layer on horizontal surfaces and features an easy 2:1 mix ratio.Versatile application: This table top epoxy resin is designed primarily for application over bare or stained wood substrates. Tips and tricks: uncured our resin epoxy can be cleaned up with lacquer thinner; Cured product can be removed with paint stripper.
More information #ad
Premium epoxy resin: mirror Coat is a decorative, solvent free, two-part epoxy resin self leveling bar top coating. Curing: at 70°f, mirror coat epoxy will be fully cured in 4 days to an amazing crystal clear coat.Brand | System Three #ad |
Manufacturer | System Three Resins, Inc. #ad |
Height | 10.8 Inches |
Length | 4.5 Inches |
Weight | 6.99 Pounds |
Width | 7.5 Inches |
Part Number | 0500K44 |
Model | 0500K44 |
More information #ad