Top 9 LMT Onsrud 63-726 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. LMT Onsrud

#ad

Inch, LMT Onsrud 63-726 Solid Carbide Upcut Spiral O Flute Cutting Tool, 0.2500" Shank Diameter, 1 Flute, 0.2500" Cutting Diameter, 3.0000" Overall Length, 21 Degree Helix, Uncoated Bright Finish

#ad
LMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
BrandLMT Onsrud #ad
ManufacturerLMT Onsrud #ad
Height0.5 Inches
Length4 Inches
Width0.5 Inches
Part Number63-726
Model63-726

2. LMT Onsrud

#ad

Uncoated Bright Finish, 2.0000" Overall Length, Inch, LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute, 21 Degree Helix, 1 Flute, 0.1875" Cutting Diameter, 0.2500" Shank Diameter

#ad
LMT Onsrud #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
BrandLMT Onsrud #ad
ManufacturerLMT Onsrud #ad
Height0.5 Inches
Length4 Inches
Width0.5 Inches
Part Number63-768
Model63-768

3. SpeTool

#ad

SpeTool Single Flute O Flute Spiral End Mill Aluminum Cutter Carbide Router 1 inch Cutting Length with 1/4Inch Shank for Aluminum Acrylic PVC MDF Plastic

#ad
SpeTool #ad - There are 1 pieces of cnc router Bit In One Package, Coming with Storage Case. Up cut, flat top with single Flute, Material: HRC55 Tungsten Carbide. Solid carbide spiral router bit with 1/4inch shank and 1/4 inch Cutting Diameter, 1 inch Cutting Length, 2-1/2 inch for Total Length. Used for carving, hollow cutting in materials like Hardwood, pVC, mdf, Nylon, Medium Density Board, resin, milling, acrylic, Cutting, slotting, ABS, etc. The design of single flute, larger spiral chip space and Mirror Polishing of CNC Router Bit Makes Non-stick Crumbs, Smooth Cutting and Fast Chip-removal.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP1F-D1/4
ModelSP1F-D1/4

4. EANOSIC

#ad

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

#ad
EANOSIC #ad - Spiral bits used for side milling, cycles and dados with clean edge and bottom, finish machining, etc. Up & down cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.

And also for carbon steel, MDF, tool steel, aluminum alloy. End mill bits can smoothly upcut and downcut groove and slots, end milling, mortises, better than straight bits. The router bit suit for CNC router and any plunge routers with 1/4" collet. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.

Clean surface, neat, no glitches. The cnc end mill router bits apply to various wood: such as plywood, OAK, cast iron, soft alloy steel, and any hardwood working and Long service life for sharp. Solid carbide and nano blue coated: the up and down cut spiral router bit is made of solid carbide. This provides longevity and produces cutting results of the highest quality.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberE2106

5. LMT Onsrud

#ad

1 Flute, LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, 2.0000" Overall Length, Inch, 22 Degree Helix, 0.1875" Cutting Diameter, 0.2500" Shank Diameter, Uncoated Bright Finish

#ad
LMT Onsrud #ad - Power cutting & Sawing. Manufacturer: Onsrud. Package dimensions: 18" l x 21" W x 18" H. Country of manufacture: United States.
BrandLMT Onsrud #ad
ManufacturerLMT Onsrud #ad
Part Number63-618
Model63-618

6. Amana Tool

#ad

Amana Tool 46170-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit

#ad
Amana Tool #ad - D shank: 1/4. Overall length L: 2-1/2. D diameter: 1/4. 1 amana Branded Tool. B1: 7mm. B cutting height: 7/8.
BrandAmana Tool #ad
ManufacturerAmana Tool #ad
Height0.25 Inches
Length2.5 Inches
Weight0 Pounds
Width0.25 Inches
Part Number46170-K
Model46170-K

7. LMT Onsrud

#ad

LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, 0.2500" Shank Diameter, 2.0000" Overall Length, Uncoated Bright Finish, 21 Degree Helix, Inch, 1 Flute, 0.1875" Cutting Diameter

#ad
LMT Onsrud #ad - Single flute, 21 degree angle. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
BrandLMT Onsrud #ad
ManufacturerLMT Onsrud #ad
Part Number65-018
Model65-018

8. SpeTool

#ad

1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver, SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Plunge cut leave with clean edge and top surface, Mortises, Cycles and dados, better than straight bits. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-D

9. LMT Onsrud

#ad

1 Flute, Inch, 0.1250" Cutting Diameter, 2.0000" Overall Length, 0.2500" Shank Diameter, 21 Degree Helix, Uncoated Bright Finish, LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool

#ad
LMT Onsrud #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle.
BrandLMT Onsrud #ad
ManufacturerLMT Onsrud #ad
Height0.5 Inches
Length4 Inches
Width0.5 Inches
Part Number62-762
Model62-762