As an Amazon Associate I earn from qualifying purchases.

Package contents: package includes 8 stud removal sockets – 1/4-inch, 12mm and 1 carrying case for your convenience; 3/8-inch and 1/2-inch socket drives; Wrench required, 3/8-inch, 10mm, 5/16-inch, 8mm, 6mm, 7/16-inch, not included.
Use your tools: fits 3/8-inch and 1/2-inch impact wrench or ratcheting wrench wrench not included; Reverse your ratchet to use as stud installer. Fits your application: stud remover socket kit fits studs that are 1/4-inch to 7/16-inch 6mm to 12mm; each socket has permanently etched size for quick identification; SAE 3/8-inch drive sockets – 1/4", 7/16"; Metric 3/8-inch drive sockets – 6mm, 5/16"; SAE 1/2-inch sockets – 3/8", 8mm; Metric 1/2-inch drive sockets – 10mm, 12mm.

Damage-free removal- our manual gear puller can take out most of the parts that match the shaft, sprockets, such as gears, bearings, pulleys, etc.
Various applications- perfect for you to remove gears, this will make the job well done. M20 lead screw length: 369 mm/14. 5". High strength puller- forged hardened steel is of high strength. Pull capacity: 10 Ton. Slim tie rods, steel center bolts, and apex threads Can easily grasp and enter narrow spaces. Even if you need to pull rusty bearings, bearings, and repair workshops, mechanical factories, etc.

Package includes: 1 Spanner Wrench & 1 Magneto Flywheel Puller.
Puller size: 24mm& 27mm. Magneto flywheel puller: One with 2 sizes: 24mm& 27mm. 24mm right hand thread for gy6 50cc 4 stroke scooter Moped ATV; 27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles. If you are not satisfied with your purchase for any reason, EUICAE is pleased to refund you. Dimension: spanner size: arms opening width: 075in-4. 3in 1. 9cm-11cm; the large end of pin: 0


Heavy pulling: the pulley puller can be used to safely and effectively removed pressed-on gears, pulleys, bearing flanges, and flywheels from shafts and housings; No need for power tools or impact wrenches.

Versatile harmonic balance tool: not just a harmonic balancer pulley puller; This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit; Invest in versatility. Comes in a sturdy blow-mold storage case.
Durable puller tool: the steering wheel remover's yoke is heat-treated for strength and durability; Lubricate the pressure screw before using the steering wheel pullers to make the operation easier; Not meant to be used with impact drills. Used to remove many harmonic balancers, pulleys, vibration dampers, or gears.

Variety of uses: not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators; This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
Durable: made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs; This blind hole bearing puller is built to last. Save money: getting a pilot bearing replaced in an auto shop could cost you up to $650; You can save hundreds of dollars by using this one pilot puller.

1. Balance World Inc
#ad
10pc 15 Sizes Motorcycle Flywheel Puller Set Universal Dirt Bike ATVs US SHIP
#adBalance World Inc #ad - P>fits most late-model MX bikes. Strong>. P>made of high quality tool grade steel, durable and long service life. Strong>. P>ten pullers of which five have double end, giving increased applications.More information #ad
Strong>. P>supplied in a red storage case, convienient to carry out and storage. Strong>. P>except for m27x1. 0, all pieces are right-hand thread. Strong>.Brand | Balance World Inc #ad |
Manufacturer | Balance World Inc #ad |
More information #ad
2. ABN
#ad
ABN Stud Extractor Set, Broken Stud Removal Socket 8-Piece SAE & Metric Stud Remover Set – Stud Puller Sockets
#adABN #ad - Effortlessly remove any stud: the abn stud remover tool kit 8pc stud Extractor Kit will effectively work on threaded, broken, rusted, stripped, and smooth studs for ultimate versatility; Includes smooth internal paws that push into the fastener more torque means greater applied force; No threads required.Package contents: package includes 8 stud removal sockets – 1/4-inch, 12mm and 1 carrying case for your convenience; 3/8-inch and 1/2-inch socket drives; Wrench required, 3/8-inch, 10mm, 5/16-inch, 8mm, 6mm, 7/16-inch, not included.
More information #ad
Easy storage: heavy-duty 8. 6” x 4. 6” x 2” inch 21. 8cm x 11. 7cm x 5. 1cm plastic blow-molded carrying case with latch for easy transportation, safe storage, and quick organization; Each compartment is permanently etched with sizing information for simple identification. Use your tools: fits 3/8-inch and 1/2-inch impact wrench or ratcheting wrench wrench not included; Reverse your ratchet to use as stud installer. Fits your application: stud remover socket kit fits studs that are 1/4-inch to 7/16-inch 6mm to 12mm; each socket has permanently etched size for quick identification; SAE 3/8-inch drive sockets – 1/4", 7/16"; Metric 3/8-inch drive sockets – 6mm, 5/16"; SAE 1/2-inch sockets – 3/8", 8mm; Metric 1/2-inch drive sockets – 10mm, 12mm.
Brand | ABN #ad |
Manufacturer | ABN #ad |
Height | 2 Inches |
Length | 8.6 Inches |
Weight | 1.19 Pounds |
Width | 4.6 Inches |
Part Number | 4183 |
Warranty | This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details. |
More information #ad
3. VEVOR
#ad
10 Ton/22040 LBS Capacity Manual Puller,11" -16.3" Spread Reach and 4.4"- 9.8" Spread Range, 14.5" Lead Screw Length Gear Removal Tools For Slide Gears, and Flywheels, Pulleys, VEVOR 3 Jaw Gear Puller
#adVEVOR #ad - 10 ton puller tool- spread reach: 280 mm/11" to 415 mm/16. 3". And our product does not need to be installed; you can use it directly. The three-jaw gear puller evenly distributes the tension and protects the gear. Tapered steel jaws- three-jaw structure has the same load distribution, which can be securely clamped and concentrically pulled.Damage-free removal- our manual gear puller can take out most of the parts that match the shaft, sprockets, such as gears, bearings, pulleys, etc.
More information #ad
Its power is evenly distributed and will not cause damage to your items. All three jaws use high-grade steel, and the center screw is coated with a black oxide layer with good corrosion resistance and long service life. Various applications- perfect for you to remove gears, this will make the job well done. M20 lead screw length: 369 mm/14. 5". High strength puller- forged hardened steel is of high strength. Pull capacity: 10 Ton. Slim tie rods, steel center bolts, and apex threads Can easily grasp and enter narrow spaces. Even if you need to pull rusty bearings, bearings, and repair workshops, mechanical factories, etc.
Brand | VEVOR #ad |
Manufacturer | VEVOR #ad |
Height | 10.2 Inches |
Length | 17.9 Inches |
Weight | 11 Pounds |
Width | 12.2 Inches |
Part Number | p3e9c3w710 |
Model | 3 Jaw Gear Puller |
More information #ad
4. EUICAE
#ad
Spanner Wrench Clutch Wrench Adjustable Wrench Holder Hub Flywheel Sprocket Spanner Wrench Set Fan Clutch Removal Tool Tools Scooter Motorcycle Accessories Type A+B
#adEUICAE #ad - Material & manufacturing: our spanner wrench and magneto flywheel puller are made of high quality and denser magnetic steel, fine workmanship and reliable quality, not easy to bend. Wide applications: spanner wrench: adjustable screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.Package includes: 1 Spanner Wrench & 1 Magneto Flywheel Puller.
More information #ad
With good manufacturing, it is sturdy, durable and strong. We stand confidently behind our products with our satisfaction guarantee! Quality and satisfaction guarantee: every piece of product has been carefully checked before packaging. Puller size: 24mm& 27mm. Magneto flywheel puller: One with 2 sizes: 24mm& 27mm. 24mm right hand thread for gy6 50cc 4 stroke scooter Moped ATV; 27mm left hand thread for GY6 125 150cc Scooter 125cc Motorcycles. If you are not satisfied with your purchase for any reason, EUICAE is pleased to refund you. Dimension: spanner size: arms opening width: 075in-4. 3in 1. 9cm-11cm; the large end of pin: 0
Brand | EUICAE #ad |
Manufacturer | EUICAE #ad |
Part Number | A0010 |
Model | A0010 |
More information #ad
5. ARCAN
#ad
ARCAN PROFESSIONAL TOOLS Hardened 3, 4 & 6-Inch Gear Puller Set with Reversible Jaws ASGPS
#adARCAN #ad - Reversible jaws: 8 adjustable positions that allow for inside and outside grip. Set includes: 3", 4", and 6" gear pullers. Heat treated chrome vanadium steel- added strength that lasts longer than standard hardened steel gear pullers.More information #ad
Damage free removal- removes slide gears, pulleys, and flywheels off of a shaft without damaging your application. Chrome finish: Easy to clean and reduces oil and grease build up.Brand | ARCAN #ad |
Manufacturer | Arcan #ad |
Height | 7 Inches |
Length | 13 Inches |
Width | 7 Inches |
Part Number | ASGPS |
Model | ASGPS |
Warranty | 1 Year |
More information #ad
6. OEMTOOLS
#ad
Gear Puller 2 or 3 Jaw, 3 Jaw Puller Set, Pully Puller Set, OEMTOOLS 27011 2/3 Jaw 2-Ton Puller, Gear Puller 2 Jaw, 2 Jaw Puller, Gear Puller Set
#adOEMTOOLS #ad - Quicker repairs: the bearing puller increase productivity and cut down on number of tools; Three jaw puller is designed to make effective repairs in less time. Made to endure: the small gear puller tool is constructed from heat-treated alloy steel to provide much needed strength.Heavy pulling: the pulley puller can be used to safely and effectively removed pressed-on gears, pulleys, bearing flanges, and flywheels from shafts and housings; No need for power tools or impact wrenches.
More information #ad
More versatility: the gear puller tool can switch between 2 or 3 adjustable jaws depending on the type of component that needs removing; Easy to switch out number of jaws on the OEM pulley puller. Reach and spread: the pulley remover for your pully puller kit features a 3. 5 inch maximum reach and maximum spread of 4. 75 inch; allows for maneuverability in tighter spaces.Brand | OEMTOOLS #ad |
Manufacturer | Great Neck Saw #ad |
Height | 3.7 Inches |
Length | 6.6 Inches |
Weight | 1.4 Pounds |
Width | 4.8 Inches |
Part Number | 27011 |
Model | 27011 |
Warranty | OEMTOOLS Limited Lifetime |
More information #ad
7. OEMTOOLS
#ad
Heat-Treated Steel Harmonic Balance Puller Yoke, and Crankshaft Pulley Puller, Works as Gear Puller, Steering Wheel Puller, OEMTOOLS 27187 Harmonic Balancer Puller Kit
#adOEMTOOLS #ad - Includes bolts for gm 3300 & 3800 V6 Engines. Easy-to-use pulley puller: features a yoke with 4 slots, which allows for 2 or 3 hole applications; The floating swivel prevents damage to shaft ends; Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw.Versatile harmonic balance tool: not just a harmonic balancer pulley puller; This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit; Invest in versatility. Comes in a sturdy blow-mold storage case.
More information #ad
Reliable harmonic puller: the screw tip keeps the harmonic pulley puller in place while you apply torque; The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. Diy or pro harmonic balancer remover: removing harmonic balancers with a prybar damages components; Our pully puller tool easily and safely removes harmonic balancers, pulleys, vibration dampers, and more; Includes bolts for GM 3300 and 3800 V6 engines. Durable puller tool: the steering wheel remover's yoke is heat-treated for strength and durability; Lubricate the pressure screw before using the steering wheel pullers to make the operation easier; Not meant to be used with impact drills. Used to remove many harmonic balancers, pulleys, vibration dampers, or gears.
Brand | OEMTOOLS #ad |
Manufacturer | Great Neck Saw #ad |
Height | 2.1 Inches |
Length | 9.2 Inches |
Weight | 3.35 Pounds |
Width | 8.1 Inches |
Part Number | 27187 |
Model | 27187 |
Warranty | OEMTOOLS Limited Lifetime |
More information #ad
8. OEMTOOLS
#ad
Pilot Bearing and Bushing Removal, OEMTOOLS 27059 Pilot Bearing Puller Attachment, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black
#adOEMTOOLS #ad - Dimensions: this pilot bearing remover is easy to store anywhere at just 104" x 3. 4" x 1. 3". The blind bearing puller is also easy to wield, weighing in at just 13. 6 ounces, making it a great pilot tool.Variety of uses: not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators; This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
More information #ad
Easy to use: the slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, attach a slide hammer, turn the attachment housing expanding both jaws against the pilot bearing, and use the slide hammer to remove the bearing. Durable: made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs; This blind hole bearing puller is built to last. Save money: getting a pilot bearing replaced in an auto shop could cost you up to $650; You can save hundreds of dollars by using this one pilot puller.
Brand | OEMTOOLS #ad |
Manufacturer | Great Neck Saw #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 0.85 Pounds |
Width | 1 Inches |
Part Number | 27059 |
Model | 27059 |
More information #ad
9. OEMTOOLS
#ad
OEMTOOLS 27182 Steering Wheel Puller Set
#adOEMTOOLS #ad - Heat treated for Strength. Comes in sturdy blow molded case. Comes in sturdy Plastic Storage Case. Includes: yoke, pressure screw and 5 Sets of Pulling Screws with Washers and Swivel.More information #ad
Brand | OEMTOOLS #ad |
Manufacturer | Great Neck Saw #ad |
Height | 1 Inches |
Length | 1 Inches |
Width | 1 Inches |
Part Number | 27182 |
Model | 27182 |
More information #ad