Top 9 Cv Axle Puller – Mechanical Pulleys

As an Amazon Associate I earn from qualifying purchases.



OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment

OEM TOOLS #ad - Heat-treated for Strength. Black oxide Finish to Resist Rust. 1/2 in drive chamfered square drive. Use with oemtools 27033 Slide Hammer.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.25 Inches
Length8.5 Inches
Weight1.13 Pounds
Width5.5 Inches
Part Number27058
WarrantyOEM Limited Lifetime

2. CTA Tools


CTA Tools 4245 CV Joint Puller

CTA Tools #ad - Use with cta tools 4310 Axle Puller. Heavy-duty construction Allows for Strength and Durability. Prevents damage to the Roller Bearing Inside the Joint. Pulls cv joints with Hidden Retaining Rings. Whether tuning up your ‘68 corvette or changing the Oil on a John Deere Tractor, CTA Can Supply You with the Tools Needed to do the Job.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height2 Inches
Length8.25 Inches
Weight1 Pounds
Width5.5 Inches
Part Number4245



OEMTOOLS 27037 3.75/4.5 Axle Puller

OEM TOOLS #ad - Fits most domestic and Import Vehicles. Heat teated Pressure Screw for Toughness. Yoke and bolt are Threaded 5/8 Inch x 18.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height3.7 Inches
Length6.6 Inches
Weight2.95 Pounds
Width4.8 Inches
Part Number27037
WarrantyOEM Limited Lifetime



OEMTOOLS 27032 Flange-Type Axle Puller

OEM TOOLS #ad - Bolt circle range is from 4-1/2 Inch to 5-1/2 Inch. Features two screws for use on Most Ford, Chrysler, GM and VW Power Steering Pulleys. Pulls pulleys on GM Belt Driven Vacuum Pumps. Slots in the yoke permit Use on Axles with 4, 5, and 6 Studs.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.1 Inches
Length8.6 Inches
Width5.3 Inches
Part Number27032
WarrantyOEM Limited Lifetime

5. Powerbuilt


Alltrade 648620 Kit 5 Master Axle Puller Tool Set

Powerbuilt #ad - Also includes laminated instruction sheet with photos. Storage case included. Tool solutions for most all situations. Kit contains slide hammer assembly, special threaded adapter, three pulling jaws, and more. Designed for automotive body work. For pulling bearings, gears, and front wheel drive axle shafts. Made to be the most reliable tools in the market today. Built to exceed tool standards.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height9.5 Inches
Length6.75 Inches
Weight14.56 Pounds
Width24.38 Inches
Part Number648620

6. Jecr


Ear Type Boot Tie Pliers, Car Band Tool Kit Set, Automotive Hose Axle Plier, Jecr 2pcs Auto Cv Joint Boot Clamp Pliers

Jecr #ad - Essential tool for fixing CV boots. Crimps and flattens clamps on ear type CV joint boot clamps. Easily tensions and secures CV boot banding strap. Can be used with any banding up to 10mm in width. Includes a built in cutter and winding mechanism.
BrandJecr #ad
ManufacturerJecr #ad
Part NumberJB0070



OEMTOOLS 27033 5-Pound Slide Hammer

OEM TOOLS #ad - Slide hammer is required for use with oemtools #27032 axle puller, oemtools #27058 fwd inner cv joint puller, oemtools #27104 4wd spindle puller, oemtools #27059 Pilot Bearing Puller, OEMTOOLS #27129 Rear Axle Bearing Puller and OEMTOOLS #27184 2/3 Jaw Puller. Chrome plated main shaft for Easy Clean-Up and Professional Look. Threaded 5/8 Inch x 18.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height3.8 Inches
Length23.7 Inches
Weight9.65 Pounds
Width8 Inches
Part Number27033
WarrantyOEMTOOLS Limited Lifetime

8. Performance Tool


Performance Tool W89326 Rear Axle Bearing Puller Set

Performance Tool #ad - The specially designed pullers allow for the removal of semi-floating rear axle bearings by firmly seizing and evenly extracting the bearing. This set includes three pullers for the applications listed below. Use with 5/8-inch - 18 UNF thread slide hammer. Those tools decrease damage and increase the number of applications.
BrandPerformance Tool #ad
ManufacturerWilmar Corporation #ad
Height0 Inches
Length0 Inches
Weight1.1 Pounds
Width0 Inches
Part NumberW89326



41700D, GEARWRENCH 10 Way Slide Hammer Puller Set

GEARWRENCH #ad - 5-1/2 lb slide hammer has a 5/8-18 thread. Yoke fits axles with 4, 5, or 6 studs in a circle from 4-1/2" To 5-1/2". Provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts. Durable blow mold storage case for tool retention and portability. Pulls rear axle on cars and 1/2-ton trucks with flange-type axles. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs.
ManufacturerK-D Tools #ad
Height4.1 Inches
Length23.6 Inches
Weight7.76 Pounds
Width9.6 Inches
Part Number41700D
WarrantyStandard Limited Lifetime