Top 9 Atomic Clock Movement High Torque – Clock Movements

As an Amazon Associate I earn from qualifying purchases.

1. TIKROUND

#ad

Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

#adTIKROUND #ad - Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands 10 mm to 450 mm. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length.

Size from the hole center to the tip: the hour hand is approx. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames. Movement size: total shaft length is 23 mm 29/32 inch, thread length is 12mm 15/32 inch, suitable for 4 - 8 mm 5/ 32 - 5/16 inches thickness clock panel. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Brand	TIKROUND #ad
Manufacturer	TIKROUND #ad
Weight	0.24 Pounds
Part Number	C-003
Model	c-003

2. Hicarer

#ad

High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger 20 mm 4/5 inches

#adHicarer #ad - Package contents: a clock movement with hook, 2 hands and some mounting hardware, come with the specially designed protect cardboard box and instructions.

Material and note: the clock pointer is made of aluminum, please check the size before purchase, please do not use too much pressure to avoid bending, suitable for AA battery. Size from center of the hole to tip: the hour hand is 154 mm/ 6. 1 inch; minute hand is 208 mm/ 8. 2 inch; second caps is 7 mm/ 028 inch. Movement size: suit for 4 - 8 mm 4/ 25 - 3/ 10 inches thickness clock panel, the total shaft length is 20 mm 4/ 5 inches, thread length is 11. 7 mm 9/ 20 inches. Parameter of the kit: i shaft, high torque clock mechanism, drive long clock hands from 10 mm to 450 mm.

Brand	Hicarer #ad
Manufacturer	Hicarer #ad
Height	0.79 Inches
Length	11.81 Inches
Weight	0.15 Pounds
Width	5.12 Inches
Part Number	Hicarer-High Torque Quartz-01

3. Hicarer

#ad

Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands Black

#adHicarer #ad - Size from the center of the hole to the tip: the hour hand is approx. Good diy clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself.

Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent. Clock movement: high torque clock movement with hook, long shaft, drive long clock hands 10 mm to 450 mm. Total shaft length: 28 mm 1-1/ 10 inches, thread length: 15. 4 mm 3/ 5 inches, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Note: please check the size before buying.

Brand	Hicarer #ad
Manufacturer	Hicarer #ad
Height	0.79 Inches
Length	16.73 Inches
Width	5.12 Inches
Part Number	Hicarer-Clock Movement Mechanism-01
Model	Hicarer-Clock Movement Mechanism-01

4. WILLBOND

#ad

Willbond High Torque Clock Movement Replacement Mechanism with Clock Hands to Fit Dials Up to 56 cm/ 22 Inches in Diameter

#adWILLBOND #ad - Size from the center of the hole to the tip: the hour hand is approx. Package include: a clock movement with metal hook, 2 spade black clock hands, mounting hardware and blister cardboard box.

Usage: fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, frame-less draw clock, three-dimensional embroidery, craft clock, etc.175 mm/ 6. 9 inches long; the minute hand is about 230 mm/ 9. 1 inches in length. Movement size: total shaft length: 15 mm 3/ 5 inch; thread length: 6. 7 mm 7/ 25 inch; jump second movement, suitable for 1 - 4 mm 1/ 24 - 4/ 25 inch thickness clock panel. High torque clock movement with metal hook: i shaft, drive long clock hands 10 mm to 450 mm, with spade shape hands to fit dials up to 56 cm/ 22 inches in diameter.

Brand	WILLBOND #ad
Manufacturer	WILLBOND #ad
Height	5.12 Inches
Length	11.81 Inches
Weight	0.15 Pounds
Width	0.79 Inches
Part Number	Willbond-High Torque Clock-01

5. Mudder

#ad

Black, Mudder High Torque Clock Movement with 2 Hands to Fit Dials up to 58.6 cm/ 23.1 Inches in Diameter Shaft Length 23 mm/ 9/10 Inches

#adMudder #ad - Clock quartz movements: high torque jump second movement, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel. Center of hole hand size: hour hand is approx.

243 mm 9. 6 inch; Second caps is approx. Good package: come with mudder specially designed blister cardboard box and instructions, convenient to carry. 170 mm 6. 7 inch; Minute hand is approx. Movement size: shaft length is 23 mm 9/ 10 inches, thread length is 15. 4 mm 3/ 5 inches. Wide application: you are enable to use it to repair, replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, craft clock, etc. 7 mm 03 inch.

Brand	Mudder #ad
Manufacturer	Mudder #ad
Height	0.79 Inches
Length	12.01 Inches
Weight	0.15 Pounds
Width	5.12 Inches

6. NICEDAYM

#ad

Long Shaft- 9/16", Clock Movement, High Torque Quartz Clock Movement Silent w/Extended Shaft for Long Hands

#adNICEDAYM #ad - Requires one "AA" battery not incl. High torque motor silent sweep extended shaft. Shaft. 3 year factory warranty. X 5/8 thick x 5/16" dia. Motor size: 2-1/8" sq. 9/16" 14mm threaded shaft, 15/16" including hand stem.

Brand	NICEDAYM #ad
Manufacturer	Clockparts #ad
Part Number	HT23
Model	HTmotor9/16

7. Takane

#ad

Takane Mini Quartz High Torque Extra Spacing Clock Movement, Choose a Size

#adTakane #ad - Maximum clock Face Thickness: 3/8". Includes all mounting hardware and metal wall hangar. Overall shaft Length: 7/8". Hour & minute hand available UPON REQUEST ONLY. Extra space between hour and minute hand so large Hands Do Not Rub! Power up to 17-1/2" hands!! hands must be made of a light weight material like Aluminum. Threaded shaft length 7/16". Shaft diameter: 5/16". Please see below for full product description including how to receive hands.

Brand	Takane #ad
Manufacturer	Takane #ad
Weight	0.13 Pounds

8. EMOON

#ad

Silent Sweep Quartz Clock Motor Kit for Clock Repair DIY Replacement, EMOON High Torque Clock Movement Mechanism with 3 Pairs of Hands

#adEMOON #ad - Accurate time-keeping&quiet motor: features EMOON high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.

Packaged with care: comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. Decorative clock hands: ornate sets for different options, perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge. Choose the suitable mechanism: this kit fit clock dials from 1/8 in - 1/4 in thick and is perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you.

Keep time in style: with emoon clock hands and mechanism combo, repairing all kinds of clocks, you too can be a clockmaker; perfect for clock replacement, or making your own customized clock project.

Brand	EMOON #ad
Manufacturer	EMOON #ad

9. Hicarer

#ad

Hicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand Shaft Length 1-1/5 Inch/ 31 mm

#adHicarer #ad - Easy to install: the clock movements kits is easy for installation; Simple and elegant design, these replacement parts suit well to different styles of clock frame. Size from the center of the hole to the tip: the hour hand is approx.

High torque clock movement with metal hook: i shaft, drive long clock hands 10 mm to 450 mm, with 230 mm/ 9. 1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying. 175 mm/ 6. 9 inches long; the minute hand is about 230 mm/ 9. 1 inches in length. Clock mechanism size: total shaft length is 31 mm 1-1/ 5 inch, thread length is 24. 6 mm 24/ 25 inches; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inches thickness clock panel.

Brand	Hicarer #ad
Manufacturer	Hicarer #ad
Height	0.79 Inches
Length	12.01 Inches
Weight	70 Grams
Width	5.12 Inches
Part Number	Hicarer-Clock Movement-01