Top 8 Strut Nut Socket – Socket Wrenches

As an Amazon Associate I earn from qualifying purchases.

1. Crescent

#ad

CX6PT20, Crescent 20 Pc. 3/8" Drive Pass-Thru X6 Standard Spline Mechanics Tool Set

#ad
Crescent #ad - Included adapter converts X6 box end for traditional square drive sockets. Pass-thru socket and ratchet system eliminates the need for deep sockets.

5° ratcheting swing arc provides turns restricted fasteners. Up to 50% thinner than standard ratchets to give you greater access. Fits 6 fastener types hex square 12 pt E-Torx Rounded Hex and Spline. Laser-etched sizing makes identifying the correct tool quick and easy. Wipes clean of oil and dirt easily. Pass-thru system works over any length threaded rod where normal ratchets and sockets won't fit. Up to 40% stronger than standard ratchets.
BrandCrescent #ad
ManufacturerCooper Tools #ad
Height1.97 Inches
Length12.64 Inches
Weight1.5 Pounds
Width6.57 Inches
Part NumberCX6PT20
ModelCX6PT20
WarrantyStandard Limited Lifetime

2. Channellock

#ad

Channellock 39100 Ultra Access Socket Set, 16 Piece

#ad
Channellock #ad - Quick release Ratchet for standard sockets. Low profile design for tight spaces. Unique pass-thru Designed Socket and Ratchet offers Ultra versatility. 13 sockets equal 26 sizes of SAE & Metric and 47 fastener sizes in all. Socket extension for deep access.
BrandChannellock #ad
ManufacturerChannellock Inc #ad
Height2.3 Inches
Length11.18 Inches
Weight0.25 Pounds
Width8.42 Inches
Part Number387-39100
Model39100
WarrantyAll CHANNELLOCK pliers, wrenches, and drivers are warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service.

3. CTA Tools

#ad

CTA Tools 3039 14 Pc. Shock Absorber Tool Kit, 1 Pack

#ad
CTA Tools #ad - Constructed of chrome vanadium. Used in conjunction with the 1/2" drive sliding t-bar for more torque. 21mm go-through ratchet, 21, 82mm deep sockets with a wide range of sizes including 16, 19, 18, 17, 22 & 24mm sockets. Includes 3 extensions: male hex: 6, 7 & 8mm. Contains 7 go-through deep sockets, 1 sliding T-Bar, 3 hex bits, 21mm go-through ratchet & 2 slotted double-d sockets. Tool kit allows the removal of the top suspension nut by Holding the strut piston so it doesn't rotate while turning the nut. Includes 2 slotted double-d sockets: 5 x 8 & 6 x 8.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Part Number3039
Model3039

4. Dawson

#ad

CSM12 3/4" 19mm Strut Channel Socket 1/2" Drive for 1-5/8" Tall Strut Channel

#ad
Dawson #ad - Compatible with all 1-5/8" channel and strut. Impact Rated. For use with all 1-5/8" Tall Channel and Strut. Zinc plated Finish. 2-1/2" overall Length.
BrandDawson #ad
ManufacturerDawson #ad
Part NumberCSM12
ModelCSM12

5. CTA Tools

#ad

CTA Tools A444 VW/ Audi Strut Nut Socket

#ad
CTA Tools #ad - High quality. Use with a 7/8" 22mm socket. Services fwd vw & audi with top shock-retaining nut recessed inside the strut tower. Tool's center bore holds the strut shaft to keep from turning. Satisfaction ensured.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Weight0.18 Pounds
Part NumberA444
ModelA444
Warrantyn/a

6. OEM TOOLS

#ad

3/8 Drive | Remove and Replace Shock Absorbers on X & J Body GM Cars | Designed to Fit the “Double D” Stem on GM Cars, OEMTOOLS 25284 Shock Absorber Socket

#ad
OEM TOOLS #ad - Item package height: 049999999949". Item package width: 099999999898". Model number: 25284. Item package length: 1. 49999999847".
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height1 Inches
Length6.25 Inches
Width3 Inches
Part Number25284
Model25284
WarrantyOEMTOOLS Limited Lifetime

7. SATA

#ad

3/8-Inch Drive Metric/SAE Sizes, with a Professional Pass-Thru Design and a Black Storage Case, ST09134SJ, SATA 21-Piece Pass-Thru Socket Set

#ad
SATA #ad - Useful accessories pass-thru ratchet set also includes a 3-inch extension and two quick-release adaptors. Storage case entire set can be stored or transported in a black plastic blow molded storage. Complete set set contains 10 metric 10, 12, 1/2, 9/16, 15, 14, 18 and 19mm and 7 sae 3/8, 13, 16, 5/8, 17, 7/16, 11, 11/16 and 3/4-inch Pass-Thru sockets. Unparalleled access ratchet made 50% thinner than conventional ratchets and 40% stronger by eliminating the drive tang. Pass-thru design innovative pass-thru style ratchet and sockets fit down any length of threaded rods.
BrandSATA #ad
ManufacturerApex Tool Group #ad
Height4.1 Inches
Length12 Inches
Width5.5 Inches
Part NumberST09134SJ
ModelST09134SJ
WarrantyStandard Limited Lifetime

8. GearWrench

#ad

235080GR, GEARWRENCH 3/8" Drive Pass-Thru Reversible Ratchet, 72 Tooth, 12"

#ad
GearWrench #ad - Up to 40% stronger than traditional ratchets by eliminating drive tang. Meets or exceeds ASME B107. 10 Up to 50% thinner head Profile than conventional ratchet systems. Dual material Comfort grip handle. 5 degree ratcheting arc.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Height0.45 Inches
Length8 Inches
Weight0.25 Pounds
Width1.5 Inches
Part Number235080GR
Model235080GR
WarrantyStandard Limited Lifetime