Top 8 Stix Bonding Primer – Primer Paint

As an Amazon Associate I earn from qualifying purchases.

1. INSL-X

#ad

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

#ad
INSL-X #ad - Before painting, review the INSL-X STIX label for proper preparation and application tips. Excellent enamel holdout, providing a great base for an even topcoat finish. Premium-quality, fiberglass, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, glossy paint, PVC, glazed block, pre-coated siding, including glossy tile, plastic, glass, vinyl, and galvanized metals.

Bonding primer for drywall, plaster, ceramic tiles, cement block, stucco, PVC plastic, concrete, trim, masonry walls, aluminum, shutters, masonry, galvanized metal, glossy surfaces, acoustical tile, Formica, ceiling, wood trim and doors, wood, and other challenging surfaces.

Low voc and easy soap and water cleanup. Bonds to "hard-to-coat" surfaces and can be top coated with almost any product. Fully cures in temperatures as low as 35 °F. Coverage: 300 - 400 square feet per gallon.
BrandINSL-X #ad
ManufacturerBenjamin Moore & Co. #ad
Height9.13 Inches
Length8.75 Inches
Weight11.04 Pounds
Width8.75 Inches
Part NumberSXA11009A-01
ModelSXA11009A-01

2. INSL-X

#ad

INSL-X SXA11099-0 STIX Bonding Primer

#ad
INSL-X #ad - Used for painting Supplies Paint & Stains. This item is insl-x sxa110099-01 STIX Bonding Primer. This product is Manufactured in United States.
BrandINSL-X #ad
ManufacturerLancaster Distribution #ad
Height8 Inches
Length14 Inches
Weight12 Pounds
Width14 Inches
Part NumberSXA110099-01
ModelSXA11099-0

3. INSL-X

#ad

Royal Blue & SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, INSL-X WR102409A-01 Waterborne Semi-Gloss Pool Paint, 1 Gallon, 1 Gallon, White

#ad
INSL-X #ad - Product 1: use with fresh or saltwater swimming pools. Product 1: royal Blue Waterborne Acrylic emulsion swimming pool paint. Product 1: quick-drying acrylic swimming pool paint. Product 2: premium-quality, pvc, glass, plastic, vinyl, glazed block, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, fiberglass, glossy paint, including glossy tile, pre-coated siding, and galvanized metals.

Product 2: bonds to "hard-to-coat" surfaces and can be top coated with almost any product. Product 2: bonding primer for drywall, cement block, trim, wood trim and doors, Formica, acoustical tile, wood, aluminum, PVC plastic, stucco, galvanized metal, ceramic tiles, shutters, ceiling, masonry walls, glossy surfaces, masonry, concrete, plaster, and other challenging surfaces.

Product 2: fully cures in temperatures as low as 35 °F. Product 1: lasting color and protection in black, royal blue, aquamarine, white, and ocean blue pool paint.
BrandINSL-X #ad

4. INSL-X

#ad

White, 1 Quart, INSL-X SXA110099-04 EMW1421981

#ad
INSL-X #ad - This item is insl-x stix waterborne Bonding Primer Acrylic Interior/Exterior Glossy White 1 Qt. Used for painting Supplies Paint & Stains. This product is Manufactured in United States.
BrandINSL-X #ad
ManufacturerLancaster Distribution #ad
Height5.3 Inches
Length8.8 Inches
Weight3.08 Pounds
Width8.8 Inches
Part NumberSXA110099-04
ModelSXA110099-04

5. INSL-X

#ad

INSL-X SXA110099-04 Waterborne Bonding Primer, Pack of Two

#ad
INSL-X #ad - Not recommended for use over polyethylene or polypropylene. Apply when air and surface temperatures are above 35 °f. Not for below grade applications. Avoid rain, moisture or high humidity for the first 24 hours of curing.

Set of 2. Stix must be top coated for exterior use. Not recommended over Kynar and similar finishes unless tested and approved by the buyer. Do not apply in direct sunlight or on a hot surface. Premium-quality, glossy paint, vinyl, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, fiberglass, including glossy tile, glass, plastic, pre-coated siding, pvc, glazed block, and galvanized metals.

Use on drywall, glossy surfaces, shutters, concrete, trim, cement block, ceramic tiles, acoustical tile, PVC plastic, masonry, stucco, masonry walls, ceiling, plaster, galvanized metal, wood trim and doors, aluminum, wood, Formica, and other challenging surfaces. Bonds to "hard-to-coat" surfaces and can be top coated with almost any product. Not intended for immersion service or continuous water contact.
BrandINSL-X #ad

6. Majic Paints

#ad

1-Quart, Glacier Mist, Cabinets, Metal, Tile, Glass, Majic Paints 8-9404-2 Diamond Hard Interior/Exterior Satin Paint RePurpose your Furniture, Wood and More

#ad
Majic Paints #ad - Ideal for diy projects: Repurpose furniture, cabinets, doors, trim, or any project you have in in mind. Color: Glacier Mist. All-purpose use: perfect for wood, vinyl, most plastics, copper, glass, drywall, steel, metal, aluminum, brick, tile, and masonry. Easy-to-apply: Sticks to any surface without sanding or priming. Superior color-retention: Levels to a beautiful smooth satin finish.
BrandMajic Paints #ad
ManufacturerYenkin-Majestic Paint Corporation #ad
Height5.75 Inches
Length4.75 Inches
Weight2.1 Pounds
Width4.75 Inches
Part Number8-9404-2
Model8-9404-2

7. Rust-Oleum

#ad

White, 1-Gallon, Rust-Oleum Corporation 256261 Maximum Adhesion Primer

#ad
Rust-Oleum #ad - Use with any topcoat, including solvent based and epoxies. The product is manufactured in United States. Outstanding wet adhesion in moist or humid environments. Interior and exterior. This product adds a great value. Easy and simple use kit. Water-base primer-sealer.
BrandRust-Oleum #ad
ManufacturerRust-Oleum Corporation #ad
Height7.62 Inches
Length6.62 Inches
Weight9 Pounds
Width7.5 Inches
Part Number256261
Model256261

8. Rust-Oleum

#ad

31.5 oz, Gray, Rust-Oleum 286258 Primer

#ad
Rust-Oleum #ad - Interior/exterior use on new or previously painted drywall, concrete, wood, masonry, metal and glossy or difficult surfaces. Ft. Water-based formula seals uniformly and will stick to surface without sanding. Gray color of primer works great under vibrant, vivid colors saving time and money by improving hide and coverage of deep topcoats. Has excellent stain blocking resistance and can be used over any oil or latex topcoat. Dries to the touch in just 30 minutes, ready to recoat in 1 hour and covers up to 100 sq.
BrandRust-Oleum #ad
ManufacturerRust-Oleum #ad
Height4.88 Inches
Length4.25 Inches
Weight2.8 Pounds
Width4.25 Inches
Part Number286258
Model286258