Top 8 Rheem Water Heater Anode Rod – Water Heater Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. Eau

#ad

Upgraded, 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon

#ad
Eau #ad - Their only purpose is to decay instead of your water heater, and that's exactly what it will do. Replacement easily - anodes are designed to be easily and regularly replaced. Just safely cut it shorter with a simple hacksaw. Size - flexible 44 inch-long anode rod is hinged into four parts.

As soon as the anode rod is depleted and fully decayed, fail and leak. Get rid of rotten egg smell - aluminum zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank. Fits - almost all water heaters including; a. O. Smith, richmond, reliance, kenmore, state, Rheem, GE and many more that also use the standard ¾" NPT Anode Rod Connection. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, the water heater begins to rust, then crack, strong reliable and off your mind!.

Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Aluminum zinc anode rod kit - the best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
BrandEau #ad
ManufacturerEau #ad
Part Number44 Inch Kit

2. Kohree

#ad

State, GE, Kohree Aluminum Zinc Anode Rod 44", Water Heater Protection Hex Head Flexible Anode Rod Includes 1 Tape Water Heaters Tank 3/4" NPT Threads for Rheem, Reliance, Richmond, Kenmore

#ad
Kohree #ad - High quality materialkohree aluminum zinc Anode Rod is made of high-quality aluminum-zinc. Good suitabilityit is used to replace the rusted bar in the water tank of the water heater, which can be a perfect upgrade for Rheem, and more.

Size: 44" long, richmond, kenmore, reliance, 3⁄4" thread, GE, State, using 1-1 / 16" socket. If you have any questions, just feel free and contact us for help! Easy installationthe 44" anode rod is hinged into four sections, flexible design allows you to install the rods conveniently even in a narrow place. It is more durable and safer compared to 316 stainless steel connectors. And we provide a roll of tape to help you tighten the screw for preventing looseness.

Full protectionkohree aluminum zinc anode rod can help you get rid of the unsatisfying rotten egg smell, prevent the water tank from rusting in the metal water tank, and absorb the oxidized substances to prolong the life of the water tank. 100% customer satisfactionproviding high-quality products and excellent service has always been our top priority.
BrandKohree #ad
ManufacturerKohree #ad
Part NumberHY1604-HM

3. Rheem

#ad

Rheem SP11524C Magnesium Anode Rod with 44-Inch Length and 0.84-Inch Diameter, Model: SP11524C, Tools & Outdoor Store

#ad
Rheem #ad - Thread size - npt in. 3/4, resistored: No. Anodic material: magnesium, total length in. 44-3/16, rod Diameter in. 0840, hex head Size. Kits which contain this part: 45W405. For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
BrandRheem #ad
ManufacturerOutdoor & Tools #ad
Part NumberMT-RPN-33942680

4. Eau

#ad

44 Inch Flexible Magnesium Anode Rod, Rheem, Reliance, Richmond, Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon Tape, Eau Water Heater Anode Rod for GE

#ad
Eau #ad - Replacement easily - anodes are designed to be easily and regularly replaced. Magnesium anode rod kit - the best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Teflon Sealing Tape and 1-1/16” chrome finished socket, Anode Rod, all in one box.

Smith, rheem, richmond, kenmore, state, reliance, GE and many more that also use the standard ¾" NPT Anode Rod Connection. Fits - almost all water heaters including; a. O. Just safely cut it shorter with a simple hacksaw. It’s best choice for your replacement if you do have smelling water problems. Their only purpose is to decay instead of your water heater, the water heater begins to rust, and that's exactly what it will do.

As soon as the anode rod is depleted and fully decayed, fail and leak. The magnesium anode able to give more electrochemically negative to prevent your tank dissolving itself with reasonable costs. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, then crack, strong reliable and off your mind! Size - flexible 44 inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space.
BrandEau #ad
ManufacturerEau #ad
Part Number44 inch

5. About Fluid

#ad

About Fluid Aluminum Zinc Replacement Anode Rods for Water Heaters Aluminum ZINC Complete KIT

#ad
About Fluid #ad - Water heater installed in a tight space? even if your water heater is located in a small or tight space, less than 12 inches long each. Our instructions are written by plumbers and translated for everyday problem-solvers like you! The Included Brass Cap is there to place on your drain, after installation, just to be certain your floors are always dry.

This unique alloy works everyday, reducing or eliminating embarrassing rotten egg smelling odors. They gathered together and documented exactly how they install anode rods, Step-By-Step, and we have included every step in our manual. The included 1-1/16” deep well socket will fit and remove your old anode rod and install your new anode upgrade. The anode rod in your water heater is designed to erode instead of your Water Heater's Tank itself. Each segment can be easily lowered, simply cut it shorter with a hacksaw. Change the anode rod, the anode rod is completely consumed usually just before your water heater warranty is up and the water heater tank begins to erode and ultimately rusts, cracks and leaks.

This is why maintaining the anode rod by checking and or replacing every 2 years in your water heater ensures the anode rod erodes, fails, NOT THE WATER HEATER. Our licensed plumbers and instructors have decades of experience. Every Two Years. Fits: almost all water heaters including; rheem, ge, richmond, kenmore, reliance, state, a o smith and many more that also use the standard ¾" npt anode rod connection.
BrandAbout Fluid #ad
ManufacturerAbout Fluid #ad
Height2 Inches
Length15 Inches
Weight2.84 Pounds
Width2 Inches
Part Number43239-30469
ModelALZN44FLEX

6. Rheem

#ad

Rheem SP213670 SP213670-Water Heater Element

#ad
Rheem #ad - Element - 240v/4500w titanium non-resistored lwd - 1-1/2 in screw-in. 4500 watt. Element diameter in. :. 316. Element length - flange to tip in. 16. 50 .
BrandRheem #ad
ManufacturerRheem #ad
Height2.3 Inches
Length21.4 Inches
Weight1.2 Pounds
Width2.6 Inches
Part NumberSP213670
ModelSP213670

7. Rheem

#ad

Rheem SP11524C Magnesium Anode Rod with 44-Inch Length and 0.84-Inch Diameter

#ad
Rheem #ad - Thread size - npt in. 3/4, resistored: No. Kits which contain this part: 45W405. Anodic material: magnesium, total length in. 44-3/16, rod Diameter in. 0840, hex head Size in. 1-1/16. For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
BrandRheem #ad
ManufacturerRheem #ad
Height1 Inches
Length42 Inches
Weight1 Pounds
Width1 Inches
Part NumberSP11524C
ModelSP11524C

8. Corro-Protec

#ad

20-Year Warranty, Stops Corrosion and Reduces Limescale, Corro-Protec Powered Anode Rod for Water Heater, Electrical Anode Rod Made of Titanium, Eliminates Rotten Egg/Sulfur Smell within 24 hours

#ad
Corro-Protec #ad - Energy efficient design – by reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs. Quick and easy installation – we’ve included an easy-to-follow paper and step-by-step online pdf instructions to make installing your anode rod much easier.

Say goodbye to odors – eliminate your water heater odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod. You will need a 1 1/16 '' socket to remove the magnesium anode as well as a 1 3/16 or 31mm socket to install The Corro-Protec.

Permanent corrosion protection – designed to replace your 40-89-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness. Warranty & quality – manufactured right here in canada, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
BrandCorro-Protec #ad
ManufacturerCorro-Protec #ad
Height4 Inches
Length16 Inches
Weight0.94 Pounds
Width4 Inches
Part Number96387
ModelCP-R