Top 8 Hope Chest Hinges – Cabinet & Furniture Hinges

As an Amazon Associate I earn from qualifying purchases.

1. douper

#ad

Maximum Weight Capacity 40lbs/2pcs, Tension Adjustable, Random Angle Lid Stays for Cabinet ,Chest ,Toy Box, Douper Lid Support Hinge

#ad
douper #ad - Durable material — douper lid stays are made of durable and sturdy zinc alloy in satin nickel, never rust. Mark two points for drilling holes, 90°, and screw each mounting bracket into its respective place. Random angle stays — keep your lid stay in place at whatever angle to need, it will not slam shut when the lid stays open and protect your fingers from smashing.

Easy to install — our lid stay allows you to keep it installed for 75°, and 110° opening. Warm tips: since the plastic clip is a connecting piece, DO NOT remove the plastic clips or twist it hard once getting plastic clips fixed onto pin, or they are breakable. Items comes with detailed install instructions. Douper lid support hinge for lifting the lid or flap of cabinet overhead kitchen cupboard caravan cabinet, blanket box, work bench table desk, duck house roof, and more window seat, storage chest project toy box, treasure chest, and book case.

The hinge is used for side-mounting and top-mounting. Easy installation. Adjustable tension — allow you to adjust 2pcs hinges weight capacity from 0lb to 40lbs by using Allen key to set up applicable friction pressure, and wardrobe, such as ones of toy chamber, cupboard and window seat, cabinet, it is designed for supporting the lid weighing less than 40lb, etc. Gift box packaging — a gorgeously exquisite gift choice for diy carpentry woodworking projects.
Branddouper #ad
Manufacturerdouper #ad
Height0.1 Inches
Length8 Inches
Width1 Inches
Part NumberFBA_DP056-Big
ModelFBA_DP056-Big

2. SafeStay

#ad

SafeStay Lid Stay 105 Degree Open with Soft Close, Easy to Install, Lid Support for Toy Box and Chest

#ad
SafeStay #ad - Holds lid open - never worry again about having to prop the lid open. Small compact design - the compact design allows for installation in tight fit areas.

100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! The lid stay allows the lid to open at a maximum 105 degree angle. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. This lid stay will hold the lid open until you are ready to close.
BrandSafeStay #ad
ManufacturerSafeStay #ad
Height0.5 Inches
Length4.5 Inches
Width3.1 Inches

3. T Tulead

#ad

Tulead Spring Lid Support Left Right Lid Support Down Hinge Red Bronze Iron Support Box Cabinet Hardware Pack of 2 with Mounting Screws

#ad
T Tulead #ad - Package content:2 x Spring Lid Support with Mounting Screws. Max weight support:10-14 lbs /4. 5-6. 3kg. Total size:182x41x38mm/7. 2"x1. 6"x1. 5"l*w*h. Great for supporting lids on cabinet, chest, box, door, luggage, etc. Spring lid support can be mounted on left or right positions.
BrandT Tulead #ad
ManufacturerT Tulead #ad
Part NumberADD06180465

4. QBOSO

#ad

Perfect for Toy Box/ Drawer Window/Wardrobe/Cabinet Door ,35Lb Normal Style 1pair, Lid Support Hinge in Satin Nickel QBOSO Folding Lid Stay Hinge with Soft Close

#ad
QBOSO #ad - Perfect for any lids or flaps when a soft closing motion is required, holds the door at any angle you want, upward door open adjustable angle of 75°, 110°, each lid stay can be used for right or left hand mounting, 90°, self adjust, easy to use.

These simple form of support hinges are well made and designed to support the lids of small box, wardrobe lids, closet, cabinet, such as mini toy box, A slight inward curve of the arm adds design feeling to your home. Adjustable for different weights - with the allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.

Don't use lubricant oil!!! material - made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 35 lbs when use 2 pcs(up to 17. 5lbs - 1 lid Stay). Package - 2 pcs lid stays, allen wrench and screw are included.
BrandQBOSO #ad
ManufacturerQBOSO #ad
Part Number43398-27385

5. Pinnacle

#ad

Bench Seat Hinge for Toy Chest- Lid Support Stay Hinge- Heavy Duty No Slam Safety Torsion Hinge.

#ad
Pinnacle #ad - Easy installation: if you are looking for a soft close, no slam lid support then Pinnacle Woodcraft's metal bench seat hinge is highly recommended and it is very easy to install with 4 screws on the storage box, toy box.

Heavy duty: maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks. No metal visible outside toy chest. High raising: this metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly.

Built-in feature: this metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming or sudden motion injuries. See installation omages. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening. 2 for 1 price! hinge and lid support.
BrandPinnacle #ad
ManufacturerPinnacle Woodcraft #ad
Height2 Inches
Length6 Inches
Width1 Inches
Part NumberBnch-Hing- FBA-2 PR-2

6. NAIERDI

#ad

150N/33lb Gas Spring, Soft Close Hinges, NAIERDI 2 Pack Lift Support, Gas Strut, Kitchen Cabinet Hinges Black, Toy Box Hinges, Lid Support

#ad
NAIERDI #ad - Soft close hinges: these lift supports will help to open/close the lids slowly to prevent your fingers from being pinched on toybox, trunk or cabinet. 1 year quality warranty: naierdi offers 1 year 100% satisfactory warranty.

If there's a product quality issue or installation problems, please feel free to contact us. Applications: this gas spring lift is suitable for window bunch seat with storage box, toy box, trunks, toy chest, rv cabinets or kithchen cabinets and so on. We will refund or replace your order to provide a best solution!150n gas shocks: 150n/33lb per strut, total Length: 1063 inch, travel Length: 3. 62 inch. Stable & rust protection: quality hinge head and better piston make lid support bracket work steadily. Complete with fixing screws and installation diagram so you can install it with no effort. Copper core and zinc plating prevent it from rusting.
BrandNAIERDI #ad
ManufacturerNAIERDI #ad

7. Yetaha

#ad

Cabinet, Vintage Jewelry Chest, Yetaha 2 Pcs Decorative Box Hing with 12 Screws, Antique Bronze Hinges, Three Folding Hardware Hinge for Door, Furniture

#ad
Yetaha #ad - Please pay attention to the size and take compatibility into account before purchasing. Material: Zinc Alloy. 43*17mm/1. 69*067inch. Package list: 2 x Hinges; 12 x Screws. Color: Antique bronze. Size: approx. Perfect for vintage wooden box, door, wardrobe, vintage jewelry chest, bin, suitcase, cabinet, cabinet etc.
BrandYetaha #ad
ManufacturerYetaha #ad
Part NumberSZ070280017968RK-1

8. National Hardware

#ad

National Hardware N208-686 V1893C Center Spring Lid Support in Antique Brass

#ad
National Hardware #ad - Spring loaded supports are available for left, right or center mount. Used to support lids on boxes, chests, etc. Manufactured from steel. Mounting screws included.
BrandNational Hardware #ad
ManufacturerTV Non-Branded Items #ad
Height0.9 Inches
Length7.6 Inches
Weight0.31 Pounds
Width3.7 Inches
Part NumberN208-686
ModelN208-686