As an Amazon Associate I earn from qualifying purchases.

Fits 3-inch or 4-inch waste lines toilet flange with wax ring for any NEW installation or REPAIR on 3-inch and 4-inch waste lines/ drain opening.
We always focus on product design and customer service. 30-day full refund and 1-Year Limited Service for you. Product specifications toilet flange-diameter:6. 88 in, washers, retainers, thickness:0.43 in. Toilet wax ring-diameter:5. 4 in, thickness:092 in. Package includes bolts, nuts and bolt caps.

Repair broken bolt rails on a 3" or 4" cast iron, pvc or abs solid toilet flanges. Super strong aluminum alloy that will not rust or corrode. Designed by a plumber for plumbers or diY'ers so you don't have to replace the whole flange.

They are more resistant to high temperature and low temperature and have better elasticity, durable. 3. High quality: made of high quality raw materials, and the green gasket and sleeve are made of high quality and environmental friendly TPE material.
1. New design: the toilet flange replacement kit has a new designed sleeve, at the same time, can effectively prevent the crawler in the sewer pipe through the pipe to climb into the bottom of the toilet, suitable for 4-inch drain pipe, the size of the mouth is 3 inches, the lower mouth narrow design, strong sealing, perfect fit with the inner wall of underground pipe, can be used for 3-inch sewer pipe.

Use flange to hold the pipe in place to prevent the pipe from shaking, and it is perfect for raising the toilet when adding a floor. Toilet wax ring replacement kit: toilet and sewer compartment with a perfect seal toilet wax ring to help you solve a series of problems such as sewer odor, the wax rings for toilets extra thick is high enough to make up for the extra tile height, backwater or rust, toilet flange damage.
This extra thick toilet wax ring with extended flange and bolts kit include all the parts for you to install, it can instantly solving a series of toilet problems, and successfully preventing toilet odor and water leakage. The toilet ring seal can keep the bathroom clean and comfortable. Package includes: 40mm extra thick wax ring*1, extended flange*1, extra flange sealant*1, anchor bolt and anchor nut combination kits *1. Extended flange and bolts: this toilet flange kits fits 4" drains.

Flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. The total repair kit also can be calibrated to adjust the exact amount of water needed which saves water. Eliminates toilet leaks: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
The hyr451t combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found. Toilet flush valve compatibility: the dual flush converter works with standard 2 in.




Toilet repair kit adjusts to fit most 3-inch flush valves found in newer, Eljer, crane, Aquasource, Ferguson, Gerber, Mansfield, Pegasus, HET toilets including, Jacuzzi, american standard, glacier bay, TOTO and many more.
1. Fluidmaster
#ad
Fluidmaster 400CAR3P5 PerforMAX Adjustable High Performance Toilet Fill Valve and Flapper Repair Kit, For 3-Inch Flush Valve Toilets
#adFluidmaster #ad - Fix noisy, running toilets with this 3” flush valve PerforMAX Kit. Adjustable valve height, and flapper arms fit most toilet models. 3” water saving adjustable flapper included. Best use in toilets with 1. 28 het & 1.More information #ad
6 gallons per flush. Anti-siphon design, code approved. Fits american standard/Eljer, Glacier Bay, Kohler, Toto and other toilet brands. Silicone seal lasts up to 10X longer than standard flappers. Efficiently control water use and levels. Solid flapper frame resists bending for a secure seal.Brand | Fluidmaster #ad |
Manufacturer | Fluidmaster #ad |
Height | 15 Inches |
Length | 7.13 Inches |
Weight | 0.95 Pounds |
Width | 3.38 Inches |
Part Number | 400CAR3P5 |
Model | 400CAR3P5 |
More information #ad
2. MENNTY
#ad
Toilet Flange with Wax Ring for Toilets Replacement Kit includes Bolts PVC Toilet Flange Repair Kit for 3" or 4" Pipes, Fit Toilet Install & Repair
#adMENNTY #ad - Easy to install, without the help of a plumber Install toilet flange repair kit at or above floor level, without the help of a plumber can be repositioned without damaging seal. Toilet wax ring replacement kit made repairing a leaky or wobble toilet and cracked flange easy.Fits 3-inch or 4-inch waste lines toilet flange with wax ring for any NEW installation or REPAIR on 3-inch and 4-inch waste lines/ drain opening.
More information #ad
Assures a perfect sealthis toilet wax ring provides good deodorization and high viscosity, deodorant, and is easy to form an airtight, and waterproof seal and perfect solution to deal with unpleasant odors and leaks caused. We always focus on product design and customer service. 30-day full refund and 1-Year Limited Service for you. Product specifications toilet flange-diameter:6. 88 in, washers, retainers, thickness:0.43 in. Toilet wax ring-diameter:5. 4 in, thickness:092 in. Package includes bolts, nuts and bolt caps.
Brand | MENNTY #ad |
Manufacturer | menty #ad |
More information #ad
3. 3D Plumbing Products
#ad
Toilet Flange Repair Kit, Works on 3" or 4" Cast Iron, PVC or ABS Toilet Flanges with Broken Bolt Rails
#ad3D Plumbing Products #ad - Putty knife works best. Can be installed in minutes once existing flange is cleaned and prepped. Do not hit with hammer! Use rubber mallet if needed.Repair broken bolt rails on a 3" or 4" cast iron, pvc or abs solid toilet flanges. Super strong aluminum alloy that will not rust or corrode. Designed by a plumber for plumbers or diY'ers so you don't have to replace the whole flange.
More information #ad
Search youTube for our installation videos. Split ring design. For proper installation you must have 3/8" clearance between flange and flooring. Will not work on PVC with metal outer ring. Broken flange must be completely free of trash or debris around and under broken flange. Does not restrict flow of existing pipe.Brand | 3D Plumbing Products #ad |
Manufacturer | 3D Plumbing Products #ad |
Weight | 1 Pounds |
Part Number | 3DTFR1 |
More information #ad
4. HYiJiaQi
#ad
Universal Toilet Flange Repair Kit Closet Flange,Fits 4 inch Waste Lines or Drain Pipe,Comprehensive Seal,No More Pipeline Gas Leakage
#adHYiJiaQi #ad - The white fixing plate is made of high quality ABS material, which ensures the durability of the whole set and is not easy to damage. 4. Perfect sealing: the double sealing of the sleeve and the inner wall of the pipe, no longer overflows to the floor, the gasket and the floor, perfectly seals the gas in the underground pipe, and maintains the fresh air in the bathroom.They are more resistant to high temperature and low temperature and have better elasticity, durable. 3. High quality: made of high quality raw materials, and the green gasket and sleeve are made of high quality and environmental friendly TPE material.
More information #ad
2. Perfect close seal with the floor: add a green gasket between the fixed plate and the floor, which plays a perfect sealing role and perfectly prevents the smell from the underground pipeline from emanating from the floor. 5. Special note: when installing, it is necessary to slowly rotate and press down to make the sleeve close to the inner wall of the underground pipe without deformation. 1. New design: the toilet flange replacement kit has a new designed sleeve, at the same time, can effectively prevent the crawler in the sewer pipe through the pipe to climb into the bottom of the toilet, suitable for 4-inch drain pipe, the size of the mouth is 3 inches, the lower mouth narrow design, strong sealing, perfect fit with the inner wall of underground pipe, can be used for 3-inch sewer pipe.
Brand | HYiJiaQi #ad |
Manufacturer | HYiJiaQi #ad |
Height | 3.15 Inches |
Length | 6.85 Inches |
Width | 6.85 Inches |
Model | Toiletflange001 |
More information #ad
5. Hibbent
#ad
Flange Repair kit for 4" Waste Line, Extra Thick Wax Ring with Extended Flange and Bolts for Floor Exit Toilet, Black, Toilet Wax Seal Replacement, Hibbent Toilet Flanges and Wax Rings Repair Kit
#adHibbent #ad - 40mm extra thick wax ring with flange sealant: high performance 40mm thick wax ring with the extra flange sealant create the best sealing for your toilet which also provides a proper bowl alignment. Easy to install: this toilet wax seal kit is easy to install, you can easily done the installation within minutes without the help of a plumber, saving you expensive plumbing bills.Use flange to hold the pipe in place to prevent the pipe from shaking, and it is perfect for raising the toilet when adding a floor. Toilet wax ring replacement kit: toilet and sewer compartment with a perfect seal toilet wax ring to help you solve a series of problems such as sewer odor, the wax rings for toilets extra thick is high enough to make up for the extra tile height, backwater or rust, toilet flange damage.
More information #ad
Extra thick toilet bowl wax gasket comes with brass bolts for floor mount toilets and a polyethylene flange guaranteed to hold its shape throughout time without breaking. This extra thick toilet wax ring with extended flange and bolts kit include all the parts for you to install, it can instantly solving a series of toilet problems, and successfully preventing toilet odor and water leakage. The toilet ring seal can keep the bathroom clean and comfortable. Package includes: 40mm extra thick wax ring*1, extended flange*1, extra flange sealant*1, anchor bolt and anchor nut combination kits *1. Extended flange and bolts: this toilet flange kits fits 4" drains.
Brand | Hibbent #ad |
Manufacturer | Hibbent #ad |
Part Number | S1006 |
Model | Black |
More information #ad
6. Next by Danco
#ad
Lever Handle, Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, White
#adNext by Danco #ad - Dual-flush light-touch lever unique split handle design: the short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The permafit silicone seal is also chlorine and chemical resistant and will not warp.Flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. The total repair kit also can be calibrated to adjust the exact amount of water needed which saves water. Eliminates toilet leaks: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
More information #ad
Hassle-free installation: drop-in installation without tools in 5 to 10 minutes - tank removal not required. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids. Important installation tip: do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve. The hyr451t combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found. Toilet flush valve compatibility: the dual flush converter works with standard 2 in.
Brand | Next by Danco #ad |
Manufacturer | Next by Danco #ad |
Height | 10.5 Inches |
Length | 3 Inches |
Weight | 0.1 Pounds |
Width | 3 Inches |
Part Number | HYR451T |
Model | HYR451T |
Warranty | Limited 1 Year |
More information #ad
7. Kohler
#ad
Kohler Genuine Part Gp1083167 Silent Fill Valve Kit For All Kohler Class Five Toilets,12.5" x 3.5" x with Kohler Genuine Part 1083980 3" Toilet Canister Flush Valve Kit
#adKohler #ad - Silent fill provides a gracious experience by filling the tank quietly. Kohler genuine part. Canister flush valve kit for Kohler Cimarron toilets. Kohler genuine part.More information #ad
Brand | Kohler #ad |
More information #ad
8. American Standard
#ad
American Standard 3280.040-0070A 4-Inch Flush Valve Assembly for Champion One Piece Toilets
#adAmerican Standard #ad - Easy to install. Durable construction. For use with american standard champion toilet – Check your model for compatibility. Compatible with champion 4 right height elongated one piece 1. 6 gpf toilet model 2034014. Reliable performance.More information #ad
Brand | American Standard #ad |
Manufacturer | American Standard #ad |
Height | 6.4 Inches |
Length | 10.3 Inches |
Weight | 0.25 Pounds |
Width | 7 Inches |
Part Number | 3280.040-0070A |
Model | 3280.040-0070A |
Warranty | Limited One Year Warranty |
More information #ad
9. American Standard
#ad
American Standard 3174105-0070A Champion Universal Replacement Flush Valve
#adAmerican Standard #ad - 7 inch tube. Replacement flush valve. Chain length. Universal replacement part for Champion 4 flushing system. 3/4 in. This is a american Standard OEM replacement part. For use with any Champion line of two piece toilet.More information #ad
Brand | American Standard #ad |
Manufacturer | American Standard #ad |
Height | 5.5 Inches |
Length | 14 Inches |
Weight | 1 Pounds |
Width | 5.5 Inches |
Part Number | 3174.105-0070A |
Model | 3174.105-0070A |
Warranty | Limited One Year Warranty |
More information #ad
10. Korky
#ad
3 Inch, Red, Korky 5030BP Large Flush Valve Kit
#adKorky #ad - Toilet repair kit fixes all common fill valve and flapper problems, running, including, noisy, slow/weak or no refilling toilets. Toilet repair kit made in usa - Proudly made in America and backed by a 5 year warranty.Toilet repair kit adjusts to fit most 3-inch flush valves found in newer, Eljer, crane, Aquasource, Ferguson, Gerber, Mansfield, Pegasus, HET toilets including, Jacuzzi, american standard, glacier bay, TOTO and many more.
More information #ad
Easy to install, the 5030bp includes: 1 toilet flush valve, 1 tank-to-bowl gasket, 1 3-in flapper, 1 Set of hardware and 1 Instructions. Toilet flapper made of flexible rubber for a tight seal on most flush valves. Korky invented the flapper and is still the preferred brand by plumbers for superior quality and reliability.Brand | Korky #ad |
Manufacturer | Korky #ad |
Height | 10.88 Inches |
Length | 4.75 Inches |
Weight | 0.31 Pounds |
Width | 5.5 Inches |
Part Number | 288875 |
Model | 5030BP |
More information #ad