1. PSI Woodworking
#ad
PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT
#adPSI Woodworking #ad - Great for holding drill bits, pen mandrel shafts, dowels, small turnings, and much more. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.More information #ad
This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Removes easily with knock out bar.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Part Number | TM32 |
Model | TM32 |
Warranty | 2 Years Under Normal Use |
More information #ad
2. Jacobs
#ad
Atlas 10" Craftsman 12" Lathe Jacobs 33 Drill Chuck 1/2" Capacity with MT2 Morse Taper 2 for Tailstock Arbor
#adJacobs #ad - Ships fast - Next Day Shipping. Morse taper #2 threaded arbor. Jacobs 1/2" capacity drill chuck. Tailstock chuck for atlas 10" Metal Lathe, Craftsman 10" and 12" Metal Lathes. Jacobs K32 key.More information #ad
Brand | Jacobs #ad |
Manufacturer | Jacobs #ad |
Height | 1.5 Inches |
Length | 6.75 Inches |
Width | 1.5 Inches |
Part Number | 33BA |
Model | 33BA |
More information #ad
3. vector tools
#ad
MINI METAL LATHE TAIL STOCK DRILL CHUCK TOOL WITH MT2 MORSE TAPER ARBOR MT 2
#advector tools #ad - Mandrel taper: MT2. Mounting holes: Jacobs taper #33. Shank length: 3 1/8". Capacity: 5/64'' to 1/2''. Mandrel material: 1010 low carbon steel.More information #ad
Brand | vector tools #ad |
Manufacturer | J&R Quality Tools #ad |
Height | 4 Inches |
Length | 6 Inches |
Width | 4 Inches |
More information #ad
4. Generic
#ad
Mini Metal Lathe Tail Stock Drill Chuck Tool with Mt2 Morse Taper Arbor Mt 2
#adGeneric #ad - Attach this lathe chuck to the tail Stock of The 7 X 10" Precision Mini Lathe". Carbon steel shank length: 3 1/8 key included No Bit Slippage FAST SHIPPING". Capacity: 5/64`` To 1/2``.More information #ad
Hobby work and light duty work in the shop Or Garage. Mounting holes: jacobs taper #33 mandrel Taper: MT2 Mandrel Material: 1010 Low. For all drilling applications. The lathe chuck won’t Slip And Is Ideal For.Brand | Generic #ad |
Manufacturer | Generic #ad |
Part Number | JR-728639369885 |
More information #ad
5. uxcell
#ad
Uxcell Keyless Drill Chuck MT2 Taper Mount Adjustable 1/32"-1/2" 3-Jaw for Lathes Milling Drilling Machine
#aduxcell #ad - Chuck type - keyless drill Chuck, can be quick and easily replaced drill bits without chuck key. Applications - suitable for drilling equipment such as portable drilling machine, bench drilling machines, lathes, milling machines, etc.3-jaw - classic 3 jaws design drill chuck with excellent clamping capability.
More information #ad
It is compatible with many different types of drilling machines. Quenching hardening and precision grinding to assure good wear-resistant. Size - clamping range: 1/32"-1/2", Mounting Hole: MT2. Maintenance - clean up the mechanical waste and foreign matter left in the drill chuck in time after using it.Brand | uxcell #ad |
Manufacturer | uxcell #ad |
Height | 3.15 Inches |
Length | 7.87 Inches |
Width | 4.33 Inches |
Part Number | a17092200ux0363 |
Model | a17092200ux0363 |
More information #ad
6. PSI Woodworking
#ad
PSI Woodworking LTCA18 Live Tailstock Chuck Adapter to 1" x 8tpi Thread with #2 Morse Taper Mount
#adPSI Woodworking #ad - Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock. Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing.More information #ad
After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories. Mounts to tailstock with the included #2 Morse Taper arbor. Wrench is included.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Part Number | LTCA18 |
Model | LTCA18 |
Warranty | 2 Years Under Normal Use |
More information #ad
7. Hurricane Turning Tools
#ad
2MT, 1" x 8 TPI, Live Tailstock Chuck Adapter, Hurricane Turning Tools
#adHurricane Turning Tools #ad - Material: Steel with internal roller bearings. Thread mount type: 1" x 8 TPI. Used most often when you want to mount you project accurately into a vacuum chuck on your headstock. Live chuck adapter for all lathes with a 2MT tailstock. Tailstock mount: #2 MT Morse Taper.More information #ad
Brand | Hurricane Turning Tools #ad |
Manufacturer | Hurricane Turning Tools #ad |
Height | 2 Inches |
Length | 5 Inches |
Width | 2 Inches |
Part Number | HTT-ACC-LTCA-18-2MT |
More information #ad
8. Mophorn
#ad
Mophorn BS-0 Dividing Head 5 Inch, Precision Dividing Head Set with 5" 3-jaw Chuck & Tailstock Dividing Plates for Milling Machine
#adMophorn #ad - Ease of adjustment - the headstock of the dividing head for milling machine can tilt from 10° below horizontal to 90° vertical so that you can handle the stuff of different sizes by changing its angle. It's the dividing plates that set the precise distance between cuttings.Wide application - the rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. With high precision - the universal dividing head comes with a direct indexing plate and an interchangeable one which is on the head, and two replacement interchangeable ones with different numbers of holes on them.
More information #ad
Strong workpiece support - the coming package also includes a tailstock which will give strong support to the long metal stick you are gonna deal with, providing a more stable working condition. Strong in construction - swing: 5. 5"/140 mm. Its delicate parts together work perfectly, mathematically dividing the materials to be cut. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long time use.
Brand | Mophorn #ad |
Manufacturer | Mophorn #ad |
Part Number | Dividing Head |
More information #ad
9. Anxingo
#ad
1/8", 5/8" Drill Chuck with Chuck Key & MT2-B18 Arbor Heavy Duty
#adAnxingo #ad - No vibrations - the machining on the chuck is exceptional and well-balanced, no wobble. 2mt - b18 arbor - made of precision ground, high grade tool steel. Morse taper #2 2mt to jacobs taper #18 b18, Long end is 2MT, short end is B18.More information #ad
Smooth operation - The weight and size can provide plenty of heft and holding power. Specifications - clamping range: 1/8" - 5/8" chuck overall Length: 3. 7in/93mm shank Diameter: 2. 2in/57mm material: Carbide Steel. Please make sure the model you need is Heavy Duty type, not fit for lightweight drill chuck.Brand | Anxingo #ad |
Manufacturer | ANXINGO #ad |
Part Number | 09801-MT2 |
More information #ad
10. CNCTOPBAOS
#ad
CNC Router Engraving Machine Rotational 4th Axis Rotary Table A Axis 3 jaw 80mm chuck+65mm Tailstock CNC dividing head+Nema23 Stepper Motor Milling Lathe Chuck Fourth Axis K11-80mm Reducing Ratio 6:1
#adCNCTOPBAOS #ad - Chuck type:80mm 3 jaw Chuck;Number of Jaws:3. Stepper motor: nema23 57mm 3A 2-phase 4 wire stepper motor. Tailstock:65mm ; Total height:115mm. Gear box output shaft diameter: 20mm ; Accessories: Set of Anti-claw and wrenches. Reducing ratio: 6:1;Angle: 03°/ step.More information #ad
Brand | CNCTOPBAOS #ad |
Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
Part Number | S23 |
More information #ad