Top 10 Table Leg Risers – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.

1. Slipstick


Slipstick CB512 2 Inch Tall Floor Protector Furniture Legs with Non Slip Rubber Grip Set of 4 2" Wide x 2" Height, Black Plastic

Slipstick #ad - Includes four 2 inch tall x 2 inch diameter riser feet and screws for secure universal installation. Ideal as replacement feet for any furniture piece including armchairs, couches, dressers, sofas, ottomans, cabinets and chairs. Bottom of each riser leg features a soft o-ring gripper to prevent unwanted sliding and protect hard floor surfaces. Set of 4 holds 900 pounds. Raises chairs or furniture 2 inch for improved ergonomics and eases sitting and standing.
BrandSlipstick #ad
ManufacturerSlipstick #ad
Height2 Inches
Length2 Inches
Weight0.44 Pounds
Width2 Inches
Part NumberCB512

2. Lift Your Table


Hard Repositionable Foot, Lift Your Table Leg Extensions, for Use with Straight Leg Folding Tables – Raises Table Up to Kitchen Counter Height

Lift Your Table #ad - For straight leg tables: your folding table must have a straight leg design – please check images for compatibility. This version only slightly compromises table stability. Alleviate lower back & neck pain and discomfort by raising your table with our leg extenders.

Repositionable foot: these folding table risers have a hard, repositionable foot allowing the table to be repositioned without removing the risers. Counter height risers: this set of table leg extenders raises most standard folding tables from 28” to approximately 36", Kitchen Counter height. Fast & easy set-up: the original lift your table folding table leg extensions are an ergonomic solution to raise the height of your table without tools in seconds - perfect for trade show exhibitors, caterers, crafters, chefs, demonstrators, sewers and more!.

Lift your table – save your back: standard folding tables are just right for sitting at. But too low for standing behind. For a stationery table, choose one of our non-slip foot versions. Leg extensions for Wishbone / bent leg style tables are also available.
BrandLift Your Table #ad
ManufacturerB Team Solutions, LLC #ad
Height5.5 Inches
Length17 Inches
Width0 Inches
Part NumberLYT-17SLK

3. Shepherd Hardware


Shepherd Hardware 9915 1-Inch Heavy Duty Felt Gard Self-Adhesive Leveling Furniture Pads, Beige,8-Pack

Shepherd Hardware #ad - Easy to install - simply clean, peel, and stick - surfaces should be free of dirt & debris and sanded if wooden to ensure a strong bond.

Self-leveling felt pads add a thick foam layer for superior surface adherence and overall better grip on angled or unevenly worn legs. Self-leveling and self-adhesive felt pads are easy to install and offer scratch-resistant protection of floors and other surfaces, especially effective for angled or unevenly worn chair legs. Heavy duty felt pads are composed of an extra dense synthetic blend and pressure-sensitive adhesive with an additional hardening process to ensure rigid long-lasting protection.
BrandShepherd Hardware #ad
ManufacturerShepherd Hardware #ad
Height5.51 Inches
Length0.47 Inches
Weight0.04 Pounds
Width4.64 Inches
Part Number9915



Sofa Legs, Perfect for IKEA Or US Made, GLTECK Tapered Plastic Sofa Couch and Chair Legs M8 Thread Metric 8mm Replacement Furniture Legs- Set of 4 with Leg Mounting Plates

GGLTECK #ad - The sofa legs: beautiful black color wood-grain pattern Goes with Any Decor, Perfect For Sofa Riser Giving You More Storage Space Under Your Furniture.

Important: please check the bolt size you need Before Buying. Made with super strong hdpe high density polyethylene, Heavy Duty Plastic Can Extend The Service Life Than Wood For Daily Use. Package includes 4 x sofa legs with m8 hanger bolt, 4 x M8 Thread Metric 8mm Leg Mounting Plates and 18 x Screws for Plates Install. 5/16’’ diameter Pre-Installed Hanger Bolt. Height: 4. 7’’ 12cm, top width:2. 3’’6cm, bottom width:1. 5’’ 4cm. Compatible with the IKEA furniture M8 8mm OR U. S made Furniture.
BrandGGLTECK #ad
ManufacturerGLTECK #ad
Height2.36 Inches
Length1.57 Inches
Width4.72 Inches
Part NumberGL-SSL-BLK

5. Antrader


Antrader 1-1/3" Dia Heavy Duty Adjustable Cabinet Sofa Feet Furniture Riser Furniture Glides and Sliders Nail On Floor Protector 12pcs

Antrader #ad - Various sizes furniture glides to accommodate different needs. Made of high quality nylon, sturdy and durable. Moisture proof, Non-slip, preventing tables and chairs from scratching the floor. Used for furniture, tables, chairs, enhance the height of cabinet. Base diameter: 35mm/ 1-1/3"; Nail Length: 25mm/1".
BrandAntrader #ad
ManufacturerGuangzhou Openfind Electronic Commerce CO., LTD #ad

6. Wynn Works


Heavy Duty Adjustable Leg Leveling Glides for Furniture

Wynn Works #ad - Set of 4 - 1-1/2" leg levelers with T-nuts 5/16" - 16 thread. Hard nylon glide is kind to all types of floors including wood. Easy to install. Drill a 7/16" hole, tap in T-nuts and screw in leveler to the height you desire.
BrandWynn Works #ad
ManufacturerDiamond Manufacturing #ad
Part NumberDi-4-LL-BN

7. Slipstick


Slipstick CB652 3 Inch Under Bed Storage Bed Risers / Furniture Risers, Adds 3" Height Set of 4 Bed Lifts Supports 2,000 lbs,Brown

Slipstick #ad - Works on all flat surfaces including wood or carpet. Package contains set of 4 bed risers, YES 4 risers per set. Set of 4 = 2, 000 lbs. Each heavy duty lifter cone can support up to 500 lbs. Elevates tables, chairs or beds 3" 8. 2 cm. Designed to support legs or bed wheels 1-1/4" to 3" in diameter.
BrandSlipstick #ad
ManufacturerSlipstick #ad
Height4 Inches
Length5.25 Inches
Weight0.7 Pounds
Width5.25 Inches
Part NumberCB652
Warranty5 year limited warranty



WEICHUAN Round Solid Wood Replacement Sofa Couch Chair Ottoman Loveseat Coffee Table Cabinet Furniture Wood LegsSet of 4

WEICHUAN #ad - The wood Legs are already coated. Attaches using pre-installed 5/16" -18 coarse Hanger Bolt, please carefully check the hanger bolt size on your present leg to assure that our new furniture legs will be compatible.

Please note that because wood is a naturally occurring material, every wooden chair leg is unique. Variations in color, texture, and grain pattern are normal. Material: rubber Wood. If you need mounting hardware to attach legs to your furniture, please search the ASIN B08DHMPQKT on the amazon to find the Furniture Legs Mounting Hardware Sets. Package include: 4pcs wood legs. Wood height: 4", top diameter: 2-1/4"; bottom diameter: 1-1/2", Please look at the picture to see the detail size.
ManufacturerWEICHUAN #ad
Height4 Inches
Length2.3 Inches
Width2.3 Inches
Part NumberWEICHUAN80000508

9. Yibuy


Yibuy 4PCS Brown Furniture Legs Feet Riser Replace Chair Couch Bed Table Feet

Yibuy #ad - Classic style, providing more warm and lightful atmosphere for home. Made of solid wood, sturdy enough to last for years of usage. Used to support furniture so as to keep them from damp and avoid damage.
BrandYibuy #ad
Manufactureretfshop #ad
Weight0.35 Pounds
Part NumberM7181211027



Furniture Leg Attachment Plates T-Plate Sofa Legs with Hanger Bolts for Furniture Sofas Couches Seats,28pcs, Leg Mounting Plates

FOLAI #ad - Easy installation: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.

Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, seats, couches, ottomans, etc. Industrial standard: 4 pcs of 49 x 49 mm /2" x 2" t-plate, 4 pcs of 5/ 16 inch M8 female converters, 4 pcs of 5/ 16" M8 hanger bolts, 16 pcs of screw adapters for 5 mm unthreaded holes. The hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate. Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
BrandFOLAI #ad
ManufacturerFOLAI #ad