As an Amazon Associate I earn from qualifying purchases.
HOMEIDOL #ad - Materialdouble cut carbide rotary burr set, total length: 45-50 mm 1. 77-2 inch. 1/8” fits dremel tool, tungsten carbide, can be used to process: iron, Cutting edge diameter: 6 mm1/4 inch, steel etc. A good rotary tool a good choice of diy carving, engraving, and polishing.
Suitable for multiple types of rotating tools. Making diy carving fans much easier to do the wood carving job. It is also an ideal gift for woodcarvers.
No wear out after a long time use. High efficiency, long service life, high-quality finish, good economic returns. It also gives greater tool control. Shank diameter: 3 mm1/8 inch, straight shank can be held by most rotary tool with three jaw chuck for accurate centering. Please check the size before you buy it. The shaft will not bend at high speed.
JESTUOUS #ad - Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder. For cast iron, carbon steel, alloy steel, stainless steel, plastics, cast steel, metal and other materials. Carbide burr kits shank diameter:3mm1/8 inch, Cutting edge diameter:3mm1/8 inch, and 20pcs/set.
Oudtinx #ad - Excellent for carving, engraving, finishing, touching up, cutting, and working on fine details.180 grit. Includes 30 assorted shapes. Covered with diamond particles. All bits have 1/8" shanks and come in convenient plastic holder.
Sworker #ad - The differing profiles let wood carvers or metal engravers trim any shape with ease. Double cut: produces a finer finish than single cut and reduces the size of the chips and slivers.
No wear out after a long time use. Sharp, durable and well balanced: the carbide burr set cut through extraneous material like a hot knife through butter. Great for detail work, not great for hogging out material. Great addition to rotary tools: compatible with apexforge, ingersoll-rand, hammerhead, proxxon, Foredom, goxawee, dewalt, Milwaukee, Beyond, RYOBI, MAXMAN, makita, PFERD, Vastar, dremel, WEN, Bosch, TECCPO, fixtec, goplus, populo, workpro, WORX.
Lukcase #ad - Double cut design: the groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum.
Adaptability: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. Total length:45-50mm, cutting diameter 1/4'', Shank Diameter 1/8''. An ideal choice for your DIY woodworking, carving, engraving, and polishing.
Tonsiki #ad - Premium materialthis carving bits set made of quality high tungsten carbide with long life, high working efficiency, durable, good wear-resistant, high hardness, heat resistance, making work more convenient. Universal compatibilitythe length of this wood carving bit set are 1.
53inch39mm with 1/8 inch3mm shank, for use with most small rotating tools such as compatible for Dremel, for Chicago etc. Different shapes are suitable for different processing, perfect for woodworking, shaping, reaming, chamfering, beveling, engraving, grooving, hollowing and other engraving operations.
Helping you get things done more easily and quickly, to meet most of your woodwork engraving needs. 20pcs different rotary bitsa great carving bits set to meet your different needs. Very suitable for detailed work, model trains, acrylic, PVC, jade, plastics, ABS, or miniature buildings and planes. Save energysharp rotary file and texture is deep improve efficiency and save energy, hobbies, DIY, fast remove. Highly recommended for professional, crafts, model making, home repair, and so much more.
THEKBS #ad - The differing profiles let wood carvers or metal engravers trim any shape with ease. Great addition to rotary tools: compatible with apexforge, foredom wen, makita, beyond, goxawee, proxxon, bosch, Vastar, dremel, PFERD, hammerhead, WORKPRO, maxman, ingersoll-rand, DeWALT Populo, Milwaukee, goplus, RYOBI, WORX, FIXTEC.
The shaft will not bend at high speed. It also gives greater tool control. 20 pcs burr set are ideal choices for your various DIY arts and crafts.
populo #ad - Foldable handle - easy to hanging and carrying with a 90 degree foldable handle. Versatile accessories - equipped with 3 chuck collets 1/16”, thin iron plate; Grinding discs and bits perfect for sharpening knives or trimming dog toenails; Wire-bristled brushes work great for rust removal, jade; flap wheel for polishing and removing on heavy duty material; Diamond cutting blade for cutting jade, and more.
Also included hss drill bits, paint stripping, pumpkin carving, Felt wheel that dedicated to polishing of jewelry, 3/32” and 1/8”, glass, Sanding Bands, .
305 piece rotary tool kit assortment - includes compete rotary tool accessories of cutting, drill and cleaning, grinding, polishing, sanding, engraving, sharpening, meet your various DIY application requirements. Reusable storage case - plastic is more sturdy, all parts were in order and set as complete, falling resistant, well organized to prevent scatted and confused.
ZFE #ad - Wide usage - 1/8" diameter shanks, able to engrave on a wide range of materials including: wood, PVC, model trains, plastics, craft and whenever you need to polish, grind, and more, cut, ABS, or miniature buildings, engrave, acrylic, used with most rotary tools, drill, etc.
Different sharp bits accessories - 30 Style different sharp router bit can reach More Carving, Great for all types of detail work. What you will get - zfe 90-piece rotary tool carving, engraving bits kit and our best service.
Sold storage box - pc plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging; All parts were in order and set was complete, well organized to prevent scattered and confused. 90pcs diamond burrs - excellent for fine detail work, engraving, touch-up and finishing; Work on glass, stone, cutting, carving, wood, metal, ceramic, plastic.
ORAPXI #ad - Double & single cut10 for each of the double cut and single cut. Single cut for hard material, steel and so on. Fit for most rotary toolswith 1/8"3mm shank, Solid tungsten rotary tool bits - Accessories for Dremel, Fordom, Dewalt, Milwaukee and Die Grinders.
Double-cut is suitable for plastic, wood, aluminum, such as iron, etc. This grinding head is easy to use. These tools are used clean welds or metal processing, which can effectively reduce labor intensity and improve work efficiency.
Widely usageorapxi carbide burrs can be used on all kinds of metal and metalloid, including quenched steel, casting, metalwork, jewelry making, jade and bone, tool making, chamfering, welding, model engineering, deburring, marble, wood carving, grinding and sculpting. The 20pcs rotary burr bits set includes various types of burrs with assorted shapes to meet your different drilling needs.
1. HOMEIDOL
#adHOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming
#adSuitable for multiple types of rotating tools. Making diy carving fans much easier to do the wood carving job. It is also an ideal gift for woodcarvers.
More information #ad
High efficiency and practicalthe rotary tools processing efficiency is higher than the manual file tool. Durablecarbide rotary burr's packed with nice plastic case for safety storage and protection. 10 different types of carving kit drill bits, meet your different needs. No wear out after a long time use. High efficiency, long service life, high-quality finish, good economic returns. It also gives greater tool control. Shank diameter: 3 mm1/8 inch, straight shank can be held by most rotary tool with three jaw chuck for accurate centering. Please check the size before you buy it. The shaft will not bend at high speed.
| Brand | HOMEIDOL #ad |
| Manufacturer | HOMEIDOL #ad |
| Height | 1.97 Inches |
| Length | 1.97 Inches |
| Width | 0.12 Inches |
| Part Number | CJ01-WJ20-RY |
More information #ad
2. JESTUOUS
#adCarbide Burrs Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
#adMore information #ad
Used with handheld electric or pneumatic tool drive, for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs. With tungsten carbide material, sharp and sturdy, processing all kinds of metal and non-metal.| Brand | JESTUOUS #ad |
| Manufacturer | Tungsten technology inc #ad |
| Height | 0.6 Inches |
| Length | 4 Inches |
| Weight | 0.01 Pounds |
| Width | 2.6 Inches |
| Part Number | XZC-20PC-1/4-ZF |
| Model | DIY Crafts ® 5903 |
More information #ad
3. Oudtinx
#adOudtinx Tm 60 Pcs Diamond Burr Bits Drill Glass Gemstone Metal for Dremel Craftsman Rotary Tool 1/8" Shanks w/Box Tip
#adMore information #ad
| Brand | Oudtinx #ad |
| Manufacturer | Oudtinx #ad |
More information #ad
4. Sworker
#adSworker Carbide Burr Set Compatible with Dremel 1/8" Shank 10PC Die Grinder Rotary Tool Rasp Bits Wood Carving Accessories Attachments Cutting Burrs Metal Grinding Engraving Porting Double Cut
#adNo wear out after a long time use. Sharp, durable and well balanced: the carbide burr set cut through extraneous material like a hot knife through butter. Great for detail work, not great for hogging out material. Great addition to rotary tools: compatible with apexforge, ingersoll-rand, hammerhead, proxxon, Foredom, goxawee, dewalt, Milwaukee, Beyond, RYOBI, MAXMAN, makita, PFERD, Vastar, dremel, WEN, Bosch, TECCPO, fixtec, goplus, populo, workpro, WORX.
More information #ad
It also gives greater tool control. The shaft will not bend at high speed. For that, we'd recommend some larger ones. A must-have: the 10-pc carbide burrs kit is a great assortment.| Brand | Sworker #ad |
| Manufacturer | Sworker #ad |
| Part Number | 69265215 |
| Model | A3130 |
More information #ad
5. Lukcase
#ad10 Pcs 1/8" Shank, Metal Carving, Engraving, Polishing, 1/4" Head Length Tungsten Steel for Woodworking,Drilling, Double Cut Carbide Rotary Burr Set
#adAdaptability: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. Total length:45-50mm, cutting diameter 1/4'', Shank Diameter 1/8''. An ideal choice for your DIY woodworking, carving, engraving, and polishing.
More information #ad
Long working life: packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel. Carbide die grinder bits: these carbide rotary burr set, shank length 35mm, with 1/8'' shank is made from Tungsten Carbide.| Brand | Lukcase #ad |
| Manufacturer | YEEZUGO #ad |
| Part Number | ML0020 |
More information #ad
6. Tonsiki
#adPolishing, Engraving, 1/8 Inch3mm Shank Tungsten Carbide Rotary Tools Accessories for DIY Woodworking, Grooving, Tonsiki 20PCS Wood Carving Bits Set, Suitable for Most Rotary Tools
#ad53inch39mm with 1/8 inch3mm shank, for use with most small rotating tools such as compatible for Dremel, for Chicago etc. Different shapes are suitable for different processing, perfect for woodworking, shaping, reaming, chamfering, beveling, engraving, grooving, hollowing and other engraving operations.
More information #ad
Able to engrave on a wide range of materials including wood, such as building and sanding dollhouse furniture, foam etc. Widely usagea valuable supplement to woodworking rotary tools. Helping you get things done more easily and quickly, to meet most of your woodwork engraving needs. 20pcs different rotary bitsa great carving bits set to meet your different needs. Very suitable for detailed work, model trains, acrylic, PVC, jade, plastics, ABS, or miniature buildings and planes. Save energysharp rotary file and texture is deep improve efficiency and save energy, hobbies, DIY, fast remove. Highly recommended for professional, crafts, model making, home repair, and so much more.
| Brand | Tonsiki #ad |
| Manufacturer | Tonsiki #ad |
| Height | 4.53 Inches |
| Length | 5 Inches |
| Weight | 0.13 Pounds |
| Width | 3.5 Inches |
| Part Number | DIY Crafts 13829 |
| Model | B074QL5T71 |
More information #ad
7. THEKBS
#adTHEKBS Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 20 Pcs Double Cut Compatible with Dremel for Wood Carving Metal Working Polishing Engraving Drilling
#adThe shaft will not bend at high speed. It also gives greater tool control. 20 pcs burr set are ideal choices for your various DIY arts and crafts.
More information #ad
Also is best choose for gift. Must have:this carbide burrs kit is a great assortment. Premium quality: the carbide burr set cut through extraneous material like a hot knife through butter. No wear out after a long time use. Double cut: produces a finer finish than single cut and reduces the size of the chips and slivers. Multiple use:these cutting burrs can work on wood metal plastic ceramic stone glass etc.| Brand | THEKBS #ad |
| Manufacturer | THEKBS #ad |
| Part Number | DMT-DOUBLE-20 |
More information #ad
8. populo
#adStorage Case.…, POPULO 305-Piece Rotary Tool Accessories Kit, Sanding, 1/8-inch Diameter Shanks, Carving and Polishing, Grinding, Universal Fitment for Easy Cutting, Sharpening
#adAlso included hss drill bits, paint stripping, pumpkin carving, Felt wheel that dedicated to polishing of jewelry, 3/32” and 1/8”, glass, Sanding Bands, .
More information #ad
Suitable populo rtk-107 Rotary Tool and other most branded rotary tools. Wide usage - 1/8"diameter universal shanks, cut, hobby, grind, craft and whenever you need to polish, compatible with Populo RTK-107 rotary tool and other most branded rotary tool accepts bit with ⅛” shank; Ideal for for home improvement, drill, engrave, and more. 305 piece rotary tool kit assortment - includes compete rotary tool accessories of cutting, drill and cleaning, grinding, polishing, sanding, engraving, sharpening, meet your various DIY application requirements. Reusable storage case - plastic is more sturdy, all parts were in order and set as complete, falling resistant, well organized to prevent scatted and confused.
| Brand | populo #ad |
| Manufacturer | POPULO #ad |
| Part Number | RTAK-305 |
| Model | RTAK-305 |
More information #ad
9. ZFE
#adDiamond Burr Bits, ZFE Diamond Burr Bits Drill Kit for Rotary Tool Metal Woodworking Router Grinding Engraving Carving- 1/8"3mm Shank Pack of 90Pcs/ 3 Sets
#adDifferent sharp bits accessories - 30 Style different sharp router bit can reach More Carving, Great for all types of detail work. What you will get - zfe 90-piece rotary tool carving, engraving bits kit and our best service.
More information #ad
Well-suited for detailed work, such as building and sanding dollhouse furniture, compatible with most rotary tools; Ideal for home improvement, Highly recommended for jewer. Sold storage box - pc plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging; All parts were in order and set was complete, well organized to prevent scattered and confused. 90pcs diamond burrs - excellent for fine detail work, engraving, touch-up and finishing; Work on glass, stone, cutting, carving, wood, metal, ceramic, plastic.
| Brand | ZFE #ad |
| Manufacturer | ZFE #ad |
| Part Number | A0000309B3US |
More information #ad
10. ORAPXI
#adORAPXI 20pcs 1/8" Shank Double & Single Cut with 3mm Cutting Head Diameter Fits Most Rotary Drill Die Grinder for Engraving, Carving and Drilling, Carbide Burr Set Tungsten Carbide Burr Rotary
#adDouble-cut is suitable for plastic, wood, aluminum, such as iron, etc. This grinding head is easy to use. These tools are used clean welds or metal processing, which can effectively reduce labor intensity and improve work efficiency.
More information #ad
Premium materialmade of high quality tungsten steel, processing hardness up to HRA≥85. Professional toolsthis is an essential carbide rotary burr toolkit for woodworking and engraving enthusiasts. Widely usageorapxi carbide burrs can be used on all kinds of metal and metalloid, including quenched steel, casting, metalwork, jewelry making, jade and bone, tool making, chamfering, welding, model engineering, deburring, marble, wood carving, grinding and sculpting. The 20pcs rotary burr bits set includes various types of burrs with assorted shapes to meet your different drilling needs.
| Brand | ORAPXI #ad |
| Manufacturer | ORAPXI International #ad |
| Weight | 0.2 Pounds |
| Part Number | LD-158 |
More information #ad
