Top 10 PSI Chuck for Wood Lathe – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

#ad
PSI Woodworking #ad - 5" diameter and weighs 2. 60 lbs. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, Pen Blank Drilling Jaws CJAWPEN, 8-1/4" Super Finishing Jaws CJAWXL, set of 2 Alligator Jaws LCALJAWS, 5" Small Flat Jaws CJAWFJ1, and more!.

Barracuda2 chuck body is 3. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4". Includes: 1 barracuda2 chuck body, 4 self-centering jaw sets, 1 woodworm screw chuck, 1 spindle adapter, 8 screws, 1 gear key, 1 Allen wrench, 1 storage case. With the variety of included jaws, spindles, the csc3000C will mount most turning projects onto your Lathe; including bowls, pens, other small turning projects, and much more. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
ModelCSC3000C
Warranty2 Years Under Normal Use

2. PSI Woodworking

#ad

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

#ad
PSI Woodworking #ad - Removes easily with knock out bar. Great for holding drill bits, dowels, pen mandrel shafts, small turnings, and much more. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberTM32
ModelTM32
Warranty2 Years Under Normal Use

3. PSI Woodworking

#ad

PSI Woodworking CUG3418CCX Special Edition Utility Grip 4-Jaw Lathe Chuck System with Jumbo Flat Jaws

#ad
PSI Woodworking #ad - Chuck body is pre-threaded to 1" x 8tpi, weighs 4 pounds, and is 4" in diameter; Includes a 3/4" x 16tpi headstock spindle adaptor. 8-1/4" flat jaws will grip workpieces from 2-3/4" to 8-1/4" diameter; 7 positions for bowl rim placement; Made from cast aluminum; Weighs 1.

50 pounds; ideal for finishing and polishing woodturning bowl and plate bottoms. Includes 16 soft rubber gripper bumper pins in two lengths to securely hold your workpiece: 8 1/2" & 8 3/4"; Pins have a 6mm thread; Also includes a allen wrench. This special edition c-series package includes both the chuck system cuG3418CC and a set of 8-1/4" Flat Jaws CJAWXL; Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi/full size woodworking lathes.

1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal; Also includes a screw chuck, allen wrench, and a set of tightening levers.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberCUG3418CCX
ModelCUG3418CCX
Warranty2 Years Under Normal Use

4. PSI Woodworking

#ad

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

#ad
PSI Woodworking #ad - This "c-series" chuck is compatible with all "C-Series" jaws and accessories. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Includes #1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. Includes screw chuck, allen wrench, and a set of tightening levers.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height4 Inches
Length4 Inches
Weight4.95 Pounds
Width2 Inches
Part NumberCUG3418CC
ModelCUG3418CC
Warranty2 Years Under Normal Use

5. PSI Woodworking

#ad

PSI Woodworking CJAWXL 8-1/4" Flat Jaws for PSI C-Series Lathe Woodturning Chucks

#ad
PSI Woodworking #ad - Ideal for finishing and polishing woodturning bowl and plate bottoms. Cjawxl is a psi c-series accessory that is compatible with all psi c-series chucks CSC3000C, CSC3500SE, CUG3418CC, CMG3C, CSC2000C. Includes 16 soft rubber gripper bumper pins in two lengths to securely hold your workpiece: 8 1/2" & 8 3/4"; Pins have a 6mm thread; Also includes Allen Wrench. Cjawxl repaces both cjawfj1 and CJAWFJ2. Grips workpieces from 2-3/4" to 8-1/4" diameter; 7 positions for bowl rim placement; Made from cast aluminum; Weighs 1. 50 pounds.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Weight1.5 Pounds
Part NumberCJAWXL
ModelCJAWXL
Warranty2 Years Under Normal Use

6. PSI Woodworking

#ad

PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For "C" Series PSI Lathe Chucks

#ad
PSI Woodworking #ad - Eliminates the need to purchase a separate new chuck for blank drilling. Converts your existing chuck fast and easy. Inexpensive and accurate. Will hold a large variety of blank sizes depending on which chuck you attach these jaws.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height1.5 Inches
Length2 Inches
Weight0.5 Pounds
Width2.25 Inches
Part NumberCJAWPEN
ModelCJAWPEN
Warranty2 Years Under Normal Use

7. PSI Woodworking

#ad

PSI Woodworking LA11418 Lathe Headstock Spindle Adapter 1-1/4" x 8tpi to 1" x 8tpi

#ad
PSI Woodworking #ad - Allows a 1-1/4" x 8tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories. Flats allow for solid wrench tool grip for tightening and loosening from spindle. Made of steel; weighs 1. 35 pounds; extends spindle length approximately 1-1/2". Wrench not included. Convert a 1-1/4" x 8tpi lathe headstock spindle to 1" x 8tpi.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length4.5 Inches
Weight1.35 Pounds
Width2.5 Inches
Part NumberLA11418
ModelLA11418
Warranty2 Years Under Normal Use

8. VEVOR

#ad

VEVOR 2.75-Inch Wood Lathe Chuck, Wood Lathe Accessories for Bowls Vases, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set

#ad
VEVOR #ad - Versatile application: applicable to the general lathe, milling machine, drilling machine and machine accessories, grinder, woodworking machinery accessories and other machine tools and accessories. Compact and stable: our mini wood lathe chuck is well-designed and made of high-quality steel.

Inner jaws tighten around workpieces varying from 09" to 1. 9". Comes with a set of accessories, 1 x Screw Chuck Stud, including 1 x chuck key, and 1 x wrench to facilitate your work. Both sides of jaw teeth and chutes are ground to be sturdy. High-performance chuck: each jaw can be adjusted to the center with superior gripping force. The chuck has 1" x 8 tpi thread and 3/4" x 16 TPI Adapter Mounted on the Chuck.

It is coated with antirust oil to prolong the service life. Simple operation: this complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. Applicable workpiece size: the wood turning chuck is ideal for mini and lathes. Clamping most shaped workpieces can also be performed. Self-centering improves the flexibility. Outer jaws spread inside of workpieces with pilot holes ranging from 1.
BrandVEVOR #ad
ManufacturerVEVOR #ad
Height3.9 Inches
Length5.9 Inches
Weight2.6 Pounds
Width5.1 Inches
Part Number2.75in4ZNWKP
Model1In x 8TPI

9. PSI Woodworking

#ad

PSI Woodworking LTCA18 Live Tailstock Chuck Adapter to 1" x 8tpi Thread with #2 Morse Taper Mount

#ad
PSI Woodworking #ad - Wrench is included. Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock. Mounts to tailstock with the included #2 Morse Taper arbor. Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing. After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height2.5 Inches
Length8.5 Inches
Width3 Inches
Part NumberLTCA18
ModelLTCA18
Warranty2 Years Under Normal Use

10. PSI Woodworking

#ad

PSI Woodworking LCM18X Wood Lathe 3-Jaw Micro Chuck

#ad
PSI Woodworking #ad - Reversible step jaws can hold work-piece from the inside or outside. Self-centering 3-jaw micro chuck is ideal for holding small woodturning projects and drilling. Inside hold from 3/4" to 2-1/2"; Outside hold up to 1-1/4". Diameter is 2-1/2" and weighs 1. Pre-threaded to 1" x 8tpi and includes a 3/4" x 16tpi lathe headstock spindle adaptor. 20 lbs; includes 2 Tightening Levers.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberLCM18X
ModelLCM18X
Warranty2 Years Under Normal Use