As an Amazon Associate I earn from qualifying purchases.
Macarrie #ad - Easy to install: you just need to connect the load cables first, and then the power cables, so there is no short circuit between the cables of the PIR motion sensor before powering on the device, and then set the delay time, simple and convenient.
Proper size to use: measuring about 7. 6 x 4. 5 x 3. 5 cm/ 3 x 1. 7 x 1. 4 inches, easy to use and install at your desired places, the motion sensing light switch is compact and lightweight, without taking up much space.
Voltage and current: there are 6 pieces of motion sensor controller in the package, and the power supply voltage is 12 volt to 24 volt, and the current is 6 A; Note: please confirm the relevant parameters before using. How to operate: the 24 volt 12 volt timer switch will automatically turn on when a body in motion enters the field of view; When the person is away for your set number of minutes, the light will automatically go off.
Sensky #ad - Infrared detection controller, adopt infrared detection way to control load switch. The sensor switch activates on when a body in motion enters the field of view with an On time hold that is adjustable from 1 to 10 minutes after motion has ceased.
Weewooday #ad - Operating principle: the working principle of the pir sensor, is simple, that the load switch is controlled by the infrared detecting mode, whose sensor sensing angle of view is 120°, and you can install the sensor in the proper environment according to your actual needs.
Easy to install and use: connect the load cables first and then the power cables, and then set the delay time; When a person is detected, to ensure that there is no short circuit between the cables of the infrared motion light switch before powering on the device, the load light is turned on, and when the person is away for a set number of minutes, the load light automatically goes off.
7. 5 x 3 x 2 cm/ 2. 95 x 1. 18 x 079 inches, and the right size makes it easy to use or store the detector at some places you want with saving space. Operating voltage and current rating: the supply voltage of PIR controller is 12 V to 24 V, and the electric current is 6 A; Please confirm the relevant parameters before use to ensure safety. Adjustable detention period: the sensing distance of the pir motion sensor is about 5 m/ 16.
HiLetgo #ad - Dc 12v infrared pir Motion Sensor Switch. Load power: 5W~100W. Sensor degree: 140° Cone angle. Power supply: DC 12V. Working temperature: -10℃- +50℃.
QWORK #ad - Induction distance: 5 ~ 8M. Technical specs: power supply voltage:12-24V;Current: 6A. Delay time: 1-10 minadjustable. Method: infrared detection controller to control load switch. Field of view: the field of view of the PIR Dome Lens is 60 degrees nominal. Package content: 2 Pack.
Sensky #ad - Wide application: you can use this sensor in different occasions like entryway lighting, pantry lighting, gun safe lighting, cabinet lighting, under the bed rails lighting. Motion activated : sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting.
Delay time adjustable- please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
Sensitivity adjustable: The sensitivity controls how close you need to be to the sensor in order to activate it.
RGBZONE #ad - Easy to install and useconnect the load cables first and then the power cables, to ensure that there is no short circuit between the cables of the infrared motion light switch before powering on the device, and then set the delay time. Please confirm the relevant parameters before use to ensure safety.
Delay time: 1-10minutesadjustable; sensing angle: 120°; Sensing distance: 8M; Trigger Mode: continuous trigger. If the motion is detected, the delay time will be reset and another delay time will start.
Scope of applicationthis high power 30a pir motion sensor can be suitable for automatic lighting in corridors, toilets, clip-on lights, LED lights string, basements, warehouses and other places, automatic ventilation of exhaust fans and automatic control for LED light bring, garages, LED panel light. Adjustable delay timedelay time is 1-10minutes, which can be adjusted by yourself. Motion sensor performancecompatible with dc 12v-24v max 30a led light application, that is [email protected] and [email protected]
Sensky #ad - Delay time adjustable: the delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
Wide application: you can use this sensor in different occasions like entryway lighting, cabinet lighting, pantry lighting, gun safe lighting, under the bed rails lighting. Warm tips： to figure out your values for the Sensitivity, Please set the delay time to its minimum value first, this will save your time.
LDCRE #ad - Led motion switch : power supply Voltage : DC 12-24 Volt ; Current: 6A. Motion-activated : the motion infrared detection controller, adopt infrared detection Way to Control Load Switch, the Sensor Light Switch Activates on when a Body in Motion Enters the Field of View with an on Time Hold That is Adjustable from 1 to 10 Minutes After Motion Has Ceased.
12v motion sensor switch range : pir passive infrared sensing has an effective Motion Detector Range of 16 Feet and Diminished Sensing of a Moving Human Body to 26 Feet.
weisuan-Tuodi #ad - With light sensor use at night or in dark light; Without light sensor Used by day and night. Application: security and protection, kitchen/cabinet/Pantry/Closet Lighting, Entryway, Home and Advertising AutomaticLighting; Human Body Monitoring, Pet animal monitoring, and etc.
0 to 7 meters detecting range and high sensitivity. When it is powered for the first time, the switch will be "ON" for self-test, it needs to leave its sensing range for 15s.
1. Macarrie
#ad6 Pack 12V 24V PIR Sensor LED Motion Sensor Motion Detector Light Switch Body Infrared Sensing Motion Timer Function Sign Control PIR Controller for Flexible LED Strip Lights
#adProper size to use: measuring about 7. 6 x 4. 5 x 3. 5 cm/ 3 x 1. 7 x 1. 4 inches, easy to use and install at your desired places, the motion sensing light switch is compact and lightweight, without taking up much space.
More information #ad
Adjustable delay time: the induction distance of the motion light switch s about 5 m/ 16. 4 ft to 8 m/ 26. 25 ft; there is a time setting button at the back of the controller, which can set the delay minutes of turning off the switch from 1 to 10 minutes. Voltage and current: there are 6 pieces of motion sensor controller in the package, and the power supply voltage is 12 volt to 24 volt, and the current is 6 A; Note: please confirm the relevant parameters before using. How to operate: the 24 volt 12 volt timer switch will automatically turn on when a body in motion enters the field of view; When the person is away for your set number of minutes, the light will automatically go off.
| Brand | Macarrie #ad |
| Manufacturer | Macarrie #ad |
| Part Number | UR-Macarrie-47 |
More information #ad
2. Sensky
#adSensky BS009 12V 24V PIR Sensor LED Motion Sensor Switch Motion Timer Function Sign Control PIR Controller LED Strips Lighting
#adMore information #ad
The field of view of the PIR Dome Lens is 60 degrees nominal. Induction distance: 8m. Delay time: 1-10 minadjustable. Pir passive infrared sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet. Power supply voltage: DC12/24V.| Brand | Sensky #ad |
| Manufacturer | Sensky #ad |
| Height | 1.38 Inches |
| Length | 2.99 Inches |
| Weight | 0.02 Pounds |
| Width | 1.77 Inches |
| Part Number | GKG0093H00000-AFN |
| Model | CECOMINOD004878 |
More information #ad
3. Weewooday
#adWeewooday 3 Packs 12 V 24 PIR Sensor Adjustable LED c Black Infrared Motion Detector Body Sensing Light Switch Controller with Embedded Probes for Flexible Strip Lights Weewooday-62301
#adEasy to install and use: connect the load cables first and then the power cables, and then set the delay time; When a person is detected, to ensure that there is no short circuit between the cables of the infrared motion light switch before powering on the device, the load light is turned on, and when the person is away for a set number of minutes, the load light automatically goes off.
More information #ad
Unit count: 1. 0 Compact and lightweight: the waterproof infrared motion detector made of quality plastic measures approx. 7. 5 x 3 x 2 cm/ 2. 95 x 1. 18 x 079 inches, and the right size makes it easy to use or store the detector at some places you want with saving space. Operating voltage and current rating: the supply voltage of PIR controller is 12 V to 24 V, and the electric current is 6 A; Please confirm the relevant parameters before use to ensure safety. Adjustable detention period: the sensing distance of the pir motion sensor is about 5 m/ 16.
| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Height | 2.36 Inches |
| Length | 4.72 Inches |
| Width | 2.36 Inches |
| Part Number | Weewooday-Motion Timer-01 |
| Model | Weewooday-62301 |
More information #ad
4. HiLetgo
#adHiLetgo Outdoor PIR DC 12V Automatic Infrared PIR Motion Sensor Switch for LED Flood Light
#adMore information #ad
| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Weight | 0.22 Pounds |
| Part Number | 3-01-1113 |
More information #ad
5. QWORK
#ad2 Pack, QWORK Motion Sensor Switch, 12V 24V PIR Sensor LED Switch Controller for Flexible LED Strips Light
#adMore information #ad
| Brand | QWORK #ad |
| Manufacturer | QWORK #ad |
| Weight | 0.19 Pounds |
| Part Number | WD4974 |
More information #ad
6. Sensky
#adKitchen Cabinet, Pantry, Closet led lighting Black-With Light Sensor, SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe
#adDelay time adjustable- please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
More information #ad
Light sensor adjustable: this function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, but when room ambient light value is less than 20 lux, the light won’t turn on, when the room ambient light value is above 20 lux, the sensor can turn light on when motion detected within sensing range. Sensitivity adjustable: The sensitivity controls how close you need to be to the sensor in order to activate it.
| Brand | Sensky #ad |
| Manufacturer | SENSKY #ad |
| Part Number | GKG0103H0000L-HL |
| Model | BS010 |
More information #ad
7. RGBZONE
#adRGBZONE PIR Motion Sensor Detector Switch, High Power 30A Body Infrared Activated Sensing Controller, DC 12-24V Sensor LED Switch Motion Function Cotroller for LED Strips Light and LED Light Lamps
#adDelay time: 1-10minutesadjustable; sensing angle: 120°; Sensing distance: 8M; Trigger Mode: continuous trigger. If the motion is detected, the delay time will be reset and another delay time will start.
More information #ad
Pir motion sensorusing infrared detection method to control switch, when the moving object enters the field of view, the sensor switch is activated, and the brightness of the light bar remains 1 to 10 minutes after the movement stops 1-10 Minutes Adjustable. Scope of applicationthis high power 30a pir motion sensor can be suitable for automatic lighting in corridors, toilets, clip-on lights, LED lights string, basements, warehouses and other places, automatic ventilation of exhaust fans and automatic control for LED light bring, garages, LED panel light. Adjustable delay timedelay time is 1-10minutes, which can be adjusted by yourself. Motion sensor performancecompatible with dc 12v-24v max 30a led light application, that is [email protected] and [email protected]
| Brand | RGBZONE #ad |
| Manufacturer | RGBZONE #ad |
| Height | 0.2 Inches |
| Length | 0.2 Inches |
| Width | 0.2 Inches |
More information #ad
8. Sensky
#adPantry, Kitchen Cabinet, Closet led Lighting Black-Without Light Sensor, SENSKY BS010H DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe
#adWide application: you can use this sensor in different occasions like entryway lighting, cabinet lighting, pantry lighting, gun safe lighting, under the bed rails lighting. Warm tips： to figure out your values for the Sensitivity, Please set the delay time to its minimum value first, this will save your time.
More information #ad
Motion activated : sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting. Sensitivity adjustable: The sensitivity controls how close you need to be to the sensor in order to activate it.| Brand | Sensky #ad |
| Manufacturer | SENSKY #ad |
| Weight | 0.09 Pounds |
| Part Number | GKG0103H00000 |
| Model | BS010 |
More information #ad
9. LDCRE
#adDC 12V 24V PIR Sensor LED Motion Sensor Switch,Body Infrared Sensing Controller for Timer Flexible LED Automatic Light Strips, 2Pack
#ad12v motion sensor switch range : pir passive infrared sensing has an effective Motion Detector Range of 16 Feet and Diminished Sensing of a Moving Human Body to 26 Feet.
More information #ad
Package content : 2 pack X 12 Volt Motion Sensor Switch. The field of view of the PIR Dome Lens is 60 Degrees Nominal. Motion sensor light switch wide application: you can use This Sensor in Different Occasions Like Entryway Lighting, Pantry Lighting, Gun Safe Lighting, Cabinet Lighting, Under the Bed Rails Lighting.| Brand | LDCRE #ad |
| Manufacturer | LDCRE-1 #ad |
| Part Number | LDCRE-1 |
| Model | 12V motion sensor switch |
More information #ad
10. weisuan-Tuodi
#adDC 6V 12V-24V 5A PIR Motion Activated Body Sensor Switch with DC Cable for LED Strip Light Roundnesswith Light Sensor, Black
#ad0 to 7 meters detecting range and high sensitivity. When it is powered for the first time, the switch will be "ON" for self-test, it needs to leave its sensing range for 15s.
More information #ad
Automatic induction. Easy to install. Widely used on motion-activated lighting, CCTV Carmra, LED strips and others. The light will be activated on/OFF by auto PIR motion detection. Application home or outdoor monitoring, Advertising Lighting, Automatic lighting, Automatic motors and appliances, etc. Timing setting from 15s to 360s. Standard 5. 5*2. 1mm dc plug Connetor.| Brand | weisuan-Tuodi #ad |
| Manufacturer | Shenzhen tuodi electric appliance co. LTD #ad |
More information #ad
