Top 10 Parf Guide System – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. Milescraft

#ad

Milescraft 1318 Drillmate Drill Guide with chuck

#ad
Milescraft #ad - Adjustable depth stop and spring action control of the head. Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Width7.13 Inches
Part Number1318
Model1318

2. Milescraft

#ad

Milescraft 8410 MC-Square300 imperial, Aluminum Framing and Woodworking Square

#ad
Milescraft #ad - Two quick angle finders for 30° and 45°angles. Includes Euro Style hinge mounting holes. Removable aluminum fence. 12" 300mm square with 1/4″ notch spacing. Inside and outside scales for measuring and marking the inside and outside of your work piece. Elongated notches for accurate line scribing. Anodized aluminum material with 3mm thickness.
BrandMilescraft #ad
ManufacturerMilescraft #ad
Part Number8410
Model8410
Warranty3 year manufacturer

3. Wolfcraft

#ad

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

#ad
Wolfcraft #ad - Fits all 1/4-inch or 3/8-inch drills. Drill guide that can be used in horizontal, vertical or angle positions. Drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place. Guide-bars themselves have springs for a quick return when doing repetitive drilling.
BrandWolfcraft #ad
ManufacturerWolfcraft #ad
Height11.75 Inches
Length5.25 Inches
Weight3 Pounds
Width5.5 Inches
Part Number4525404
Model4525404
WarrantyLimited Lifetime

4. KREG

#ad

Adaptive Cutting System Project Table Top

#ad
KREG #ad - Versatile guides position and hold materials for a wide variety of accurate cuts. Precision-machined holes accept included Versa-Stops for exact material positioning. Mdf and aluminum table designed to support and position solid wood and plywood while cutting with the Kreg Adaptive Cutting System Plunge Saw and Guide Track. Integrated measuring scales ensure accurate, repeatable cuts and simple setups. Large 55" x 29 3/4" surface supports plywood sheets and boards while cutting.
BrandKREG #ad
ManufacturerKreg #ad
Height29 Inches
Length2 Inches
Weight56 Pounds
Width55 Inches
Part NumberACS-TTOP
ModelACS-TTOP

5. POWERTEC

#ad

5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack, POWERTEC, 71410K 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System

#ad
POWERTEC #ad - Steel pressure pad: complete with removable non marring plastic. Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth.

Versatility: these rail clamps provide a portable clamping option to a table saw, great for ripping sheet metal, perfect as MFT Clamps for your homemade workbench, and fit in a T-slot. Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood. Superior clamping force: delivers consistently secure placement and safe Clamp action for a seamless workflow.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height1 Inches
Length7.5 Inches
Width4.5 Inches
Part Number71410
Model71410

6. Zerodis

#ad

Dowel Drill Press Guide Jig,6/7/8/9/10mm Drill Bushings Vertical Hole Woodworking for Electric Power Hand Drill Blue

#ad
Zerodis #ad - Aluminium alloythe drill guide is made of premium aluminium alloy, it is of strong strength and long durability. Accurate drillingcenterlines ensure accurate alignment when drilling into various surfaces.

By holding the drill guide body, easy to get vertical hole drilled without any deviation. Practical woodworking ToolThe hole jig is a great tool set for both furniture factory and woodworking enthusiasts. Drill guide body + 5 drill bushingsthe drill guide jig has 5 drill bushings and their diameters are 6mm, 9mm, 10mm/024, 032, 028, 035, 7mm, 8mm, 0.39inch respectively. It is rather easy to change the bushing thread into the drill guide jig. Drill guide jig for vertical hole DrillingThis is a set of drill guide tools for the fixation and centering while drilling and woodworking.
BrandZerodis #ad
ManufacturerZerodis #ad
Height0 Inches
Length0 Inches
Weight1.1 Pounds
Width0 Inches
Part NumberZerodisrqmfebt0ap-02

7. CLEAR STYLE

#ad

Bench Dog by Clear Style for T-Track Woodworking Aluminum Table Precision C N C Made Bench Dogs 22 Pack

#ad
CLEAR STYLE #ad - Total 22 pcs 0125in + levelers 8 units. Perfect for woodworking Workers, Sanding, great for cutting, and routing. Fits 078-08in holes with 1in Head. Both use for 45 and 90 Degree. Also can work on T-Track tables. Package contains: 2 pcs - 1. 4*6. 75in extended stops, 4 pcs - 07in stops, 4 pcs - 2in high stops, 4 pcs - 0375in stops and 4 pcs - 0125in stops with Levelers. Durable construction Made Of Aluminium.
BrandCLEAR STYLE #ad
ManufacturerCLEAR STYLE #ad
Height3.5 Inches
Length8.5 Inches
Width6.5 Inches

8. 3M

#ad

Snowblowing, Ear protection for Mowing, 24 dB NRR, 3M WorkTunes Connect Hearing Protector with Bluetooth Technology, Construction, Work Shops

#ad
3M #ad - Integrated microphone lets you make and take phone calls without removing the hearing protection. Cord and antenna-free design lets you move easily on the job. High-fidelity speakers provide premium sound quality. Nrr of 24 db noise Reduction Rating. Bluetooth technology lets you seamlessly stream entertainment from your mobile phone and any other Bluetooth enabled device.
Brand3M #ad
Manufacturer3M #ad
Height7.06 Inches
Length5.83 Inches
Weight0.97 Pounds
Width3.9 Inches
Part Number90543-4DC
Model90543-4DC

9. KREG

#ad

Kreg Adaptive Cutting System Versa Stops -ACS435

#ad
KREG #ad - Stops for positioning workpieces accurately and securely when using the Adaptive Cutting System Project Table. Durable Aluminum Construction. Secure to hold materials accurately during 90° and 45° cuts. Versatile for positioning materials precisely.
BrandKREG #ad
ManufacturerKreg #ad
Height3 Inches
Length5 Inches
Weight0.3 Pounds
Width2 Inches
Part NumberACS435
ModelACS435

10. Festool

#ad

6 5/8" 168mm, Festool 491594 Quick Clamp For MFT And Guide Rail System

#ad
Festool #ad - Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Secures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application. Festool compatibility - kapex ks 120, mfT/3, TSC 55, TS 55, TS 75. Includes 1 clamp. Clamping thickness 6 5/8 inches 168mm. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.
BrandFestool #ad
ManufacturerFestool #ad
Height2 Inches
Length12 Inches
Weight4.4 Pounds
Width8 Inches
Part Number491594
Model491594
Warranty3-Year Limited Warranty