As an Amazon Associate I earn from qualifying purchases.
Oneida Air Systems #ad - Retrofits to any make/model single stage dust collector 3-5 HP recommended. Includes assembly gasket and hardware. Inlet and outlet ports for use with common ductwork. Mounts to any airtight, reinforced dust container.
Oneida Air Systems #ad - Made in usa - us pat. Longer liferspan - prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings.
Easy installation - compatible with almost any dust collector, and to your tools with either a 4” or 5” hose. Sized right – retrofits on 1 hp – 3 hp single-stage dust collectors. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, assembly gasket and hardware.
Oneida Air Systems #ad - Increased suction power - now 20% more efficient with neutral vane technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss! Latest and greatest edition - new 2.
5 model delivers up to 2x the airflow of smaller cyclones and lid-style separators. Made in america – comes with everything you need to convert your wet/dry vacuum into a two-stage, SD hose, drum dolly with caster wheels, gasket, 10-gallon drum with pre-cut lid, dust-free system.
Works with most materials: Wood dust, clay/silica dust, and much more! Longer lifespan – prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. 7282074 and patent pending. Includes the AS cyclone, and mounting hardware. This simple and efficient design can be adapted for use with any make, size, or model vacuum and features female inlet and outlet ports that fit the cuffed 2. 5" hoses of larger shop vacuums.
Oneida Air Systems #ad - Increased suction power - the original and still the best! now 20% more throughput cfm and efficiency with neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss! Longer lifespan - prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter.
The dust deputy plus will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.
Kit contains the anti-static cyclone separator, & mounting hardware. Wet or dry – this simple and efficient design can be adapted for use with any make, drywall dust, or model wet/dry vacuum and features tapered 2. 0" ports that fit the cuffed 2. 5” hoses that come standard with most shop vacuums. Made in america – designed, 2 o-rings, our dust deputy plus kit lets you build the dust control system that’s right for you.
Delmar Tools #ad - Included 90° adapter - unlike competitor versions, ours comes with a 90° adapter for convenience. Attaches to 5 gallon buckets in seconds - The dust separator clips to a 5 gallon bucket in seconds making for incredibly fast and easy setup.
Manufacturer lifetime warranty - If the dust separator ever fails or is damaged, it is covered by a lifetime manufacturer warranty. Collects vacuum dust to prolong filter life - The Delmar Tools dust separator separates vacuum dust into a separate container, keeping your filter clean and your vacuum running for longer.
Cen-Tec Systems #ad - Translucent finish allows operator to see the separation of debris. Commercial grade rubber mounting gasket insures against air leaks that can rob performance. Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum.
Ideal for use in a broad range of applications including woodworking, stone counter top production shops, hard wood floor refinishers, commercial painters, remodelers, sheet rock installation and repair, gardening, liquid capture, auto body detail shops, construction clean-up contractors, and slurry collection.
The outside of the inlet and exit to the vacuum are designed to accept popular 2. 5” dust collection wire support hoses commonly used in home and commercial workshops. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Dewalt, Shop Vac, Vacmaster, and many other brands. The hoses will fit male into the 2.
Scrollnado #ad - Includes Mininado dust cyclone separator. Innovative dust collection accessory for the scroll saw. Adapts to all scroll saws. Picks up nearly all of the dust while scroll sawing. Collects dust above and below your workpiece and scroll saw table.
Cen-Tec Systems #ad - The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Dewalt, Craftsman, John Deere, Ridgid, as well as many private brands typical of the 2 ½" vacuum connection. The inner collar and extra-durable acetal clip ring are designed to fit to tools directly that accept a quick click collar connection.
1-1/4" diameter x 16-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection. The soft tpe of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool.
Additional 2 ½" cuff mounted on a bayonet allows the operator to use dust collection workstations with home shop vacuums popular with table saws. Expanded version of cen-tec's popular 94192 dust collection hose with additional ¾”, 1-1/4” power tool adapters, and additional 2 ½" shop vacuum adapter. Fein, cobalt, Hitachi and Milwaukee Electric. The cen-tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum.
POWERTEC #ad - Universal: whether used as a main line or extension, this hose fits and accommodates all dust collectors when properly connected. Ingenuous segmented design means it will maintain desired rigidity when dust collecting in hard to reach areas, and possesses the ability to bend, thus maintaining optimal air flow to your dust collector.
Premium build: features an all-black construction and is made out of polypropylene – offering high flexural strength, durability and chemical/moisture resistance.
POWERTEC #ad - The 2-1/2 in. Opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Please note: this cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs.
Function: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line.
1. Oneida Air Systems
#adOneida Air Systems Super Dust Deputy XL 6" Retrofit Cyclone Separator for Single-Stage Dust Collectors XL 6” Cyclone
#adMore information #ad
Eliminates filter clogging and suction loss while protecting the collector's fan blower from harmful debris. Us pat. 6" i. D. 7282074, d703401. Patented design stops over 99% of fine dust and bulk debris before it clogs the dust collector's filter.| Brand | Oneida Air Systems #ad |
| Manufacturer | Oneida Air Systems #ad |
| Height | 37.5 Inches |
| Length | 18 Inches |
| Weight | 8.5 Pounds |
| Width | 19 Inches |
| Part Number | FBA_AXD002030AXL |
| Model | FBA_AXD002030AXL |
More information #ad
2. Oneida Air Systems
#adOneida Air Systems Super Dust Deputy 4/5 DIY
#adEasy installation - compatible with almost any dust collector, and to your tools with either a 4” or 5” hose. Sized right – retrofits on 1 hp – 3 hp single-stage dust collectors. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, assembly gasket and hardware.
More information #ad
Includes cyclone, 2x reducer adapters, the lightweight and compact design makes for fast and simple installations. 4/5 cyclone with included adapters offers 4 or 5" OD inlet connects to your tools and 4 or 6" OD outlet connects to your collector. Approximately 23" height. 7282074, d703401. High efficiency - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency.| Brand | Oneida Air Systems #ad |
| Manufacturer | Oneida Air Systems #ad |
| Height | 23 Inches |
| Length | 13.25 Inches |
| Width | 14.25 Inches |
| Part Number | AXD002 |
| Model | AXD002 |
More information #ad
3. Oneida Air Systems
#adDust Deputy Deluxe Cyclone Separator Kit DD 2.5 Deluxe 10-Gal
#ad5 model delivers up to 2x the airflow of smaller cyclones and lid-style separators. Made in america – comes with everything you need to convert your wet/dry vacuum into a two-stage, SD hose, drum dolly with caster wheels, gasket, 10-gallon drum with pre-cut lid, dust-free system.
More information #ad
The dust deputy deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!. Works with most materials: Wood dust, clay/silica dust, and much more! Longer lifespan – prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. 7282074 and patent pending. Includes the AS cyclone, and mounting hardware. This simple and efficient design can be adapted for use with any make, size, or model vacuum and features female inlet and outlet ports that fit the cuffed 2. 5" hoses of larger shop vacuums.
| Brand | Oneida Air Systems #ad |
| Manufacturer | Oneida Air Systems #ad |
| Height | 30 Inches |
| Length | 14 Inches |
| Width | 14 Inches |
| Part Number | AXD |
More information #ad
4. Oneida Air Systems
#adDust Deputy Plus Anti-Static Retrofit Cyclone Separator Kit for Wet/Dry Shop Vacuums with Collapse-Proof Bucket Lid and Hose DD Plus
#adThe dust deputy plus will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.
More information #ad
Works with most materials: wood dust, metal shavings, blasting soda, concrete dust, pharmaceutical waste, grass & leaves, pet/animal hair, baking flour, size, water, clay/silica dust, cooled ash & soot, and much more!. You supply the waste container. Note: if used with a 5-gallon bucket, hose clamp, 2 elbows, patented, collapse-proof bucket lid designed to fit most 5-gallon buckets, & manufactured in the USA, hose, gasket, the bucket must be a minimum of 90 mils thick or else it may collapse under vacuum pressure. Kit contains the anti-static cyclone separator, & mounting hardware. Wet or dry – this simple and efficient design can be adapted for use with any make, drywall dust, or model wet/dry vacuum and features tapered 2. 0" ports that fit the cuffed 2. 5” hoses that come standard with most shop vacuums. Made in america – designed, 2 o-rings, our dust deputy plus kit lets you build the dust control system that’s right for you.
| Brand | Oneida Air Systems #ad |
| Manufacturer | Oneida Air Systems #ad |
| Part Number | AXD001 |
More information #ad
5. Delmar Tools
#adEngineered For Maximum Peformance, Included 90° Angled Adapter, Attaches To 5 Gallon Buckets In Seconds, Delmar Tools Patent Pending Shop Vacuum Dust Separator
#adManufacturer lifetime warranty - If the dust separator ever fails or is damaged, it is covered by a lifetime manufacturer warranty. Collects vacuum dust to prolong filter life - The Delmar Tools dust separator separates vacuum dust into a separate container, keeping your filter clean and your vacuum running for longer.
More information #ad
This version does not include a hose**. Rubber gasket and tight seals for maximum suction - Each dust separator has a sturdy rubber gasket to provide the tighest seal possible to maximize the suction from your shop vacuum.| Brand | Delmar Tools #ad |
| Manufacturer | Delmar tools #ad |
| Part Number | DT-3-Master |
More information #ad
6. Cen-Tec Systems
#adCen-Tec Systems 97470 Quick Click Dust Collection Separator, Translucent
#adIdeal for use in a broad range of applications including woodworking, stone counter top production shops, hard wood floor refinishers, commercial painters, remodelers, sheet rock installation and repair, gardening, liquid capture, auto body detail shops, construction clean-up contractors, and slurry collection.
More information #ad
Compatible with Cen-Tec's Quick Click dust collection accessories. Product is made in the USA. Compatible with all major brands of wet/dry shop vacuums. Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. The outside of the inlet and exit to the vacuum are designed to accept popular 2. 5” dust collection wire support hoses commonly used in home and commercial workshops. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Dewalt, Shop Vac, Vacmaster, and many other brands. The hoses will fit male into the 2.
| Brand | Cen-Tec Systems #ad |
| Manufacturer | Cen-Tec Systems #ad |
| Part Number | 97470 |
| Model | 97470 |
More information #ad
7. Scrollnado
#adNew Universal Scrollnado with Mininado dust separator
#adMore information #ad
| Brand | Scrollnado #ad |
| Manufacturer | Drillnado #ad |
| Height | 4 Inches |
| Length | 15 Inches |
| Width | 6 Inches |
| Part Number | USN |
More information #ad
8. Cen-Tec Systems
#adCen-Tec Systems 94709 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection, Silver
#ad1-1/4" diameter x 16-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection. The soft tpe of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool.
More information #ad
Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool. Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Additional 2 ½" cuff mounted on a bayonet allows the operator to use dust collection workstations with home shop vacuums popular with table saws. Expanded version of cen-tec's popular 94192 dust collection hose with additional ¾”, 1-1/4” power tool adapters, and additional 2 ½" shop vacuum adapter. Fein, cobalt, Hitachi and Milwaukee Electric. The cen-tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum.
| Brand | Cen-Tec Systems #ad |
| Manufacturer | Cen-Tec Systems #ad |
| Height | 7.64 Inches |
| Length | 18.35 Inches |
| Weight | 100 Kilograms |
| Width | 15.79 Inches |
| Part Number | 94709 |
| Model | 94709 |
More information #ad
9. POWERTEC
#adBlack, 2-1/2-Inch, POWERTEC 70198 2-1/2-Inch Flexible Dust Collection Hose 36-Inch Long
#adPremium build: features an all-black construction and is made out of polypropylene – offering high flexural strength, durability and chemical/moisture resistance.
More information #ad
Includes: 2-1/2” left Spiral Dust Collection Hose. Application: an expandable dust collection hose that extends up to 36 inches 3ft, twist, and snake into a variety of positions for optimal project versatility. Ultra-flex: hose offers superb flexibility for maneuvering around your workshop and machinery.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 3 Inches |
| Length | 10 Inches |
| Weight | 0.48 Pounds |
| Width | 3 Inches |
| Part Number | 70198 |
| Model | 70198 |
More information #ad
10. POWERTEC
#adPOWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer
#adFunction: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line.
More information #ad
Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID. Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection. Includes: 4” to 2 1/2” Dust Collection Hose Reducer.| Brand | POWERTEC #ad |
| Manufacturer | Southern Technology LLC #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.2 Pounds |
| Width | 4 Inches |
| Part Number | 70136 |
| Model | 70136 |
More information #ad
