As an Amazon Associate I earn from qualifying purchases.
1. Magswitch #ad
Magnet Switch with On/Off Capabilities, Supplies and Accessories, Tools, 150 lb Holding Force, Magswitch MagSquare 165 Magnetic Welding Square Base Clamp Holder for Welding Kit, black #adMagswitch #ad
- Large sheet leveling, alignment, workholding, weld grounding, spatter, fixturing, mounting, sheet de-stacking, fitting and many more applications are performed significantly faster. Welders helper: our welding & heavy fabrication tools are engineered to drive productivity for professional welders, metalworking, notching, positioning, fabricators and pipefitters.
No electrical power source needed. Magnetic grip turns all the way off for quick release. On/off switch: the true on and off capabilities create a platform that is more efficient, stick torch, safer and easier to use! Use it with tig, faster, spot, fiber, arc welders.
Pull corners, secure steel sheets for cutting, use as a guide or make your own fixtures. With 150 lb strong holding force.
Endless benefits: multiplane magnetic grip on 5 sides, pre-tapped holes for mounting. When turned off debris falls off. These magnetic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds. Magsquare: hold and set just about anything, just about anywhere. No need to pry or fight magnet for precise positioning. A must for any welding table or cart.
|Part Number||MAGSQUARE 165|
|Warranty||1 year manufacturer defect only|
2. Strong Hand Tools #ad
Patented Design, On/Off Switch, 45° & 90° Angle, 4-3/8 x 3-3/4 x 1″, Strong Hand Tools, Adjust-O Magnetic Square, MSA45, Max Pull Force: 65 lbs 30kg #adStrong Hand Tools #ad
- Pull force: 65 lbs 30 kg. Easy to clean. Max. Simply turn Off and wipe. Dimensions: 4 3/8" x 3 3/4" x 1" L x H x D. Ideal for round and square tubing, angle, and flat stock. Turn magnet off or at the mid-point position when setting up, turn On when you’re ready to work.
3. Industrial Magnetics #ad
300 Amp 150 lbs, Mag-Mate WG300R On/Off Magnetic Welding Ground, Red #adIndustrial Magnetics #ad
- On/off rare earth magnetic welding ground. 300 amp rating. Makes welding quicker and easier than ever before. Lets welders set up, weld and move on to the next job quickly. Holds on flat surfaces and pipe.
4. Magsamson #ad
Strong and durable welding bracket Triangle20 KG Pull, On-Off Switchable Welding Magnets and Clamps #adMagsamson #ad
- The welding holders are compact with durable high gloss enamel end plates. And they are galvanized material, corrosion resistant, durable, not easy to rust. And these welder magnets are made of high-quality stainless steel with powder coating. These magnets are durable, and resistant to rust and corrosion.
Magsamson magnet holder makes your welding work more efficient and precise. Easy to clean after magnetism wiped. Warranty and service: we offer 1 year warranty. Totally enclosed to guard against metallic dust. Simply fixed and removal.
Powerful strength: the magnetic force of this welded bracket with neodymium magnet technology can reach a maximum pulling force of 20 kg. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright blue color will help you locate it more easily.
Safe & secure: these welding holders grip metal and hold it at the angle you need to work safely and efficiently. Easy use: an on/off-switch controls the magnetic force of the welding magnet. Flexible suction and multiple angles: the project can change the suction power according to the different suction requirements, and there are multi-angle operations 35° 90° 135° and steel pipe welding. Please contact us if you have any question or problem, we will guarantee you have 100% satisfaction purchasing experience.
5. Strong Hand Tools #ad
Heavy Duty, Strong Hand Tools, Pull Force: 65 lbs, MSA46-HD, 4-3/8" x 3-3/4" x 1-1/8", On/Off Switches, Adjust-O Magnet Square #adStrong Hand Tools #ad
- Turn the magnet off when setting up, turn on when you're ready to work. Fast and safe set-up! Ideal for round and square tubing, angle, and flat stock.
Dimension: 4-3/8 x 3-3/4 x 1-1/8″ 111 x 95 x 29 mm. The fast & easy way to hold metal work pieces at 45 Degree & 90 Degree. Max. Simply turn off and wipe. Pull force: 90 LBS 40 kg. Easy to clean.
6. ULIBERMAGNET #ad
ULIBERMAGNET Welding Clamps Magnet,Heavy Duty Magnetic Welding Clamps Holder with On/Off,660LB Holding Force Square Magnet with Handle for Welding,Filter,Lift and Tools #adULIBERMAGNET #ad
- Made of high-quality materials, durable, wear-resistant and durable. Magnetic welding base kit: ulibermagnet magnetic welding clamp holder and heavy duty fabrication tools are designed to increase the productivity, efficiency and safety of professional welders and fabricators. Multi-function super strong neodymium magnetic base with max 660lb vertical pull-force and a on/ofF switch, mounting, metalworking, workholding, just about anywhere, alignment, for examples, welding clamp, fitting, cutting, Hold and set just about anything, used widely in workshop or workstation, drilling, notching, spatter, sheet de-stacking, positioning, grinding, fixturing and many application which it is difficult to perform by hand.
All magnets are extensively tested for tensile strength and we offer a complete after sales service for all Ulibermagnet magnets. On/off switch of strong welding magnet: with a on/off switch and detachable handle of super strong permanent neodymium magnet, not worry about removal difficulty, quick absorption and release for any ferrous item surface, No power supply required!.
After-sales service: our company specializes in the development and sales of magnetic products, you can find any magnetic products you want in our store. Many-sided magnetic surface and two model of lift magnet except for top side, 100lb of two curved surface. Two model switch “i and ii”，the vertical magnetic pull-force is max when the handle switch to “II”position, Max vertical magnetic pull force is at bottom 660lb, there are five magnetic surface, 440lb of two rectangular side, the magnetic pull-force is only on e tenth of max pull-force when the handle switch to “I”. High strength and high hardness. It's a good helper for welding workers.
7. LISHUAI #ad
55LBS Magnetic Welding Square Strong Hand Tools 30°, 120°, 135°, 90°, 150° Degree 2 PACK of Small, 75°, 60°, 45°, 105°, On-Off Switchable Welding Magnets and Clamps #adLISHUAI #ad
- Easy use : an on/off-switch controls the magnetic force of the welding magnet. Please contact us if you have any question or problem, we will guarantee you have 100% satisfaction purchasing experience.
On/off-switch and Multi-angles can save you a lot of time and efforts. Totally enclosed to guard against metallic dust. Strong power: the magnetic force of this Heavy Duty Welding Holder which employ Neodymium magnet technology can reach a top pull force of 110LBS.
Simply fixed and removal. This hexagon magnetic clamp can create or assemble 9 angles: 30°, 45°, 90°, 120°, 135°, 75°, 60°, 105°, 150°.
High efficiency: you may be concerned about the price but you will not be disappointed in the performance. Easy to clean after magnetism wiped. It worth your money! Warranty and service: we offer 1 year warranty. Multi-angle: with the multi-angle welding holder you can create different works easily.
8. ANER #ad
200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector, 200A Magnetic Welding Ground Clamp #adANER #ad
- Do not use welding grounding to lift or transport materials. Applicable to clamp both flat and round workpieces. Warm tips: make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material.
Stays clean because magnetic field turns completely off. Fast set up and grounds instantly. Magnetic welding ground clamp: made of high quality iron, durable in use.
The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use. Easy to use: strong grip on flat or round iron surfaces. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction.
Simply place on clean surface and turn on then start welding. It can be freely controlled to open and close. 200a magnetic ground clamp: magnet strength pull force 30 kg, Simple to connect, ground wire of welding machine. High strength and hardness. Package included:1 x Welding Ground Clamp.
9. Strong Hand Tools #ad
Copper Connector Stud, 44 LBS Magnetic Force, On/Off Switch, Grounding Magnet, Strong Hand Tools, PowerBase, Machined V Surface, 300A @ 60% Duty Cycle, GM203 #adStrong Hand Tools #ad
- Magnetic force: 44 LBS 20 kg. Dimension: 2 x 2 x 1. 4″ 50 x 50 x 64 mm. Amperage: 300a @ 60% Duty Cycle. Power through your grounding applications! Start grounding instantly! Powerful rare earth magnet delivers heavy duty holding power.
10. LISHUAI #ad
Max 110lbs Heavy Duty Neodymium Welding Magnets Holder, 135°, 60°, 105°, 90°, Hexagon Multi-Angle 30°, 120°, 150° 2 PACK of Large, 45°, 75°, On/Off-Switchable Strong-Hand Welding Magnetic Clamps #adLISHUAI #ad
- Please contact us if you have any question or problem, we will guarantee you have 100% satisfaction purchasing experience. Strong power: the magnetic force of this Heavy Duty Welding Holder which employ Neodymium magnet technology can reach a top pull force of 110LBS.
On/off-switch and Multi-angles can save you a lot of time and efforts. This hexagon magnetic clamp can create or assemble 9 angles: 30°, 135°, 45°, 105°, 60°, 75°, 90°, 120°, 150°.
Easy to clean after magnetism wiped. Totally enclosed to guard against metallic dust. Simply fixed and removal.
It worth your money! Warranty and service: we offer 1 year warranty. Multi-angle: with the multi-angle welding holder you can create different works easily. High efficiency: you may be concerned about the price but you will not be disappointed in the performance. Easy use : an on/off-switch controls the magnetic force of the welding magnet.