Top 10 Nail Puller Cats Paw – Pry Bars

As an Amazon Associate I earn from qualifying purchases.

1. Estwing

#ad

9" Pry Bar with Forged Steel Construction & No-Slip Cushion Grip, PC210G, Estwing Pro Claw Nail Puller

#ad
Estwing #ad - Forged in one piece – the most durable, longest lasting striking tools available. High leverage design – rounded head for added torque & increased leverage. Precision thin claw – gives you access into hard-to-reach places. Removes headless nails – claw designed allow for headless nail removal with minimal wood damage. No-slip cushion grip – comfortable, durable vinyl grip for a strong hold in all conditions.
BrandEstwing #ad
ManufacturerEstwing #ad
Height9.13 Inches
Length9 Inches
Weight0.41 Pounds
Width2.13 Inches
Part NumberPC210G
ModelPC210G

2. Spec Ops

#ad

Spec Ops, SPEC-D10CLAW Tools 10" Nail Puller Cats Paw Pry Bar, 3% Donated to Veterans Black, High-Carbon Steel

#ad
Spec Ops #ad - Precision-honed claws remove embedded or headless nails with minimal damage. 3% of all spec ops tools purchases are donated to veteran and first responder causes. Dual strike zones for rapid nail extraction. Two nail pullers for added versatility. Up to 20% lighter, carbon-steel design for sniper control. 100’ drop-tested to ensure durability on the harshest jobsites. Compatible with SRS Retention Lanyards for added safety.
BrandSpec Ops #ad
ManufacturerSpec Ops Tools #ad
Part NumberSPEC-D10CLAW
ModelSPEC-D10CLAW
WarrantyLimited Lifetime Warranty: [email protected]

3. Crescent

#ad

Crescent Flat Pry Bar

#ad
Crescent #ad - Striking face has ground surface for precision nailing. Nail slot in both claw and pry ends for access to pulling. Durable high visibility Red finish is corrosion-resistant. Precision ground ends for nail pulling with less material damage.
BrandCrescent #ad
ManufacturerCooper Tools #ad
Height0.75 Inches
Length11.5 Inches
Weight0.35 Pounds
Width3.25 Inches
Part NumberMB8
ModelMB8

4. Estwing

#ad

DEP12, 12" Double-Ended Pry Bar with Straight & Wedge Claw End, Estwing Nail Puller

#ad
Estwing #ad - Removes headless nails – claw designed allow for headless nail removal with minimal wood damage. High leverage design – rounded head for added torque & increased leverage. Work in small spaces – the precision thin claw allows the user to access hard-to-reach and confined places. Built for the pro – carpenters, demolition crews, roofers, tradesmen & serious DIYers. Forged in one piece – the most durable, longest lasting striking tools available. Perfect for window & door trim, wood workers, framers, molding and baseboard.
BrandEstwing #ad
ManufacturerEstwing #ad
Height11 Inches
Length11 Inches
Weight1.21 Pounds
Width1.1 Inches
Part NumberDEP12
ModelDEP12
WarrantyEstwing warrants its all steel hammers against failure in normal use, but does not warrant its tools against misuse, abuse or wearing out. Misuse could include, but are not limited to the following: a). Striking other hardened objects such as other tools, hardened nails, drills or chisels, etc. b). Pulling (attempting to withdraw) hardened nails, screws or nail sets. c). Filing of nick in claws or handles

5. WORKPRO

#ad

12” Pry Bar, Claw Bar, Cats Paw Nail Remover, Prying Apart Baseboard, for Kitchen Remodel, Multi-sided Forged Steel Made, 8” Mini Crowbar, WORKPRO 2-Piece Nail Puller Set

#ad
WORKPRO #ad - 8" crowbar weighs 180 grams, and 12" crowbar weighs 420 grams. Rust-proof design: surface of pry bar is coated with anti-rust oil, which can effectively avoid surface rust and have a longer service life. Application: polished pry bar end can be wedged into narrow spaces.

It can be very useful when you’re recycling used pallets or other salvaged wood. The angled edge is fit for pulling apart walls, wood panels and removing moldings, nails & trim, prying off decorative strips, tiles, and more. The head of crowbar allows for striking as a hammer. The bending strength of 8" crowbar is greater than 500 inch pounds. The bending strength of 12" crowbar is greater than 1200 inch pounds. High hardness: crowbar is forged from high-quality carbon steel, with high hardness & durability.

It is recommended that you clean the surface and dry it after use, which will help to extend the service life of the crowbar. Hexagonal shaft has six sides for better grip and is great for levering. Convenience: crowbar complies with relevant environmental protection requirements and can be used with confidence. Versatile construction: the design of l-shaped crowbar helps increase torque, and with the help of leverage, it is convenient to use.
BrandWORKPRO #ad
ManufacturerWORKPRO #ad
Part NumberW002002AE

6. Bates Choice

#ad

Nail Pliers Cats Paw Nail Puller, Nail Remover, Pliers, Nail Remover Tool, Nail Pulling, Bates- Nail Puller, Nail Puller Tool, Staple Puller, End Cutting Pliers, Cutting Pliers, Carpenter Tools

#ad
Bates Choice #ad - Dual use end nipper pliers to Cut Wires Or Nails Or Simply Pull Them Out. Perfect for carpenters, Installing New Floor, Construction, Handymen, Etc.7” end cutting Plier, Nail Puller. Soft plastic Coated Grip. Made from high carbon steel For Long Lasting Performance And Preventing Rust.
BrandBates Choice #ad
ManufacturerBates choice #ad
Part Number..
Model..

7. BAKUMA

#ad

BAKUMA Nail puller Kajiya 280 Japan Import

#ad
BAKUMA #ad - Mm : 280x67x20 Please do not use it for any purpose other than its intended purpose. Please place it in a conspicuous place during use and be careful of safety. Keep out of the reach of infants and children. Note : do not point the cutting edge at anyone. Product size approx. Material : S55C. It is highly evaluated all over the world for its high safety and quality. Size : 280mm. A product of bakuma, a japanese company that manufactures and sells housing-related products and carpentry tools.
BrandBAKUMA #ad
ManufacturerBAKUMA #ad
Height0.79 Inches
Length11.02 Inches
Weight0.8 Pounds
Width2.64 Inches
Part Number280ミリ
Model280ミリ

8. Dead On Tools

#ad

Silver, Dead On Tools EX9CL 10-5/8-Inch Exhumer Nail Puller

#ad
Dead On Tools #ad - Quality assured products. Trusted and used by experts. Designed with the skilled craftsman in mind. Proven and tested for durability and function in real world conditions. A true performance product.
BrandDead On Tools #ad
ManufacturerDead On Tools #ad
Height3 Inches
Length7 Inches
Width3 Inches
Part NumberEX9CL
ModelEX9CL

9. Spec Ops

#ad

SPEC-D11MOLD Tools 11" Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans Black, Spec Ops

#ad
Spec Ops #ad - Dual strike zones for rapid nail extraction. 100’ drop-tested to ensure durability on the toughest jobsites. Extra-wide, 30º blade for on-target molding removal. Two nail pullers for added versatility. Compatible with SRS Retention Lanyards for added safety. Precision-honed claw end removes embedded or headless nails with minimal damage. Up to 20% lighter, high carbon steel design for sniper control. 3% of all spec ops tools purchases are donated to veteran and first responder causes.
BrandSpec Ops #ad
ManufacturerSpec Ops Tools #ad
Part NumberSPEC-D11MOLD
ModelSPEC-D11MOLD
WarrantyLimited Lifetime Warranty: [email protected]

10. Vaughan & Bushnell

#ad

14", Vaughan & Bushnell 4320 Dalluge Da Bar By Dalluge Nail Puller

#ad
Vaughan & Bushnell #ad - Chrome finish. Nail puller perfect for removing trim and molding. Flat claws reduce damage to wood surfaces. Compact body is thinner and lighter than similar nail pullers. Forged and tempered for strength and durability.
BrandVaughan & Bushnell #ad
ManufacturerVaughan & Bushnell Mfg #ad
Height0.75 Inches
Length14 Inches
Width3.2 Inches
Part Number4320
Model4320