Top 10 Lid Hinge Small – Cabinet & Furniture Hinges

As an Amazon Associate I earn from qualifying purchases.

1. SafeStay


SafeStay Lid Stay 105 Degree Open with Soft Close, Easy to Install, Lid Support for Toy Box and Chest

SafeStay #ad - Holds lid open - never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.

The lid stay allows the lid to open at a maximum 105 degree angle. Small compact design - the compact design allows for installation in tight fit areas. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! .
BrandSafeStay #ad
ManufacturerSafeStay #ad
Height0.5 Inches
Length4.5 Inches
Width3.1 Inches

2. Ryf


RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

Ryf #ad - Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Easy to install lid support --the lid hinge is used for side mounting and top mounting.

Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Installing screws and Allen wrench in package.
BrandRyf #ad
ManufacturerRyf #ad
Height0.15 Inches
Length8 Inches
Width1 Inches

3. LXZ


6 PCs Antique Brass Lid Folding Support Hinges, Lid Stay Hinge for Wooden Boxes Jewelry Cases Chest Folded Length 2.6"/6.6cm; Plate Width 0.4"/1.1cm

LXZ #ad - Function: it is a right-side built-in hinge used to support shelves, chest lids, or display boxes and cases, and to prevent a lid from slamming shut. Size: full length 4-31/64-in 11. 4 cm, folded length 2-19/32-in 6. 6 cm, width 7/16-in 1. 1 cm. How to mount: each hinge has 4 screws to mount and can be easily mounted using a screwdriver. Please figure out the mounting positions according to the size of chest. Package: pack of 6 and screws with antique brass finish are included. Material: Iron finished with distressed antique brass.
BrandLXZ #ad
ManufacturerLXZ #ad
Height0.39 Inches
Length2.6 Inches
Weight14 Grams
Width0.43 Inches

4. Jiozermi


Jiozermi 2 Packs Lid Support Hinge, 180 Degree Rotatable Hinge, 201 Stainless Steel Lid Stay Hinge for Boxes Cases Cabinet

Jiozermi #ad - The hinge can be used for side or bottom mounting. Unfolded length is 8. 7 inch / 220 mm. Mounting Hole Distance: 08 inch /20mm. Package contents: you will receive 2 pcs lid hinge support and 12 x mounting screws.

Wide application: the folding support hinge is suitable for furniture cabinets, cupboard, office racks, wooden boxes, jewelry cases, chest, wardrobes and so on. It still maintains wonderful flexibility over time. 100% happy customers: jiozermi feel confident that you'll love our product, that we'll give back your money if you're not thrilled with your purchase within 30 days. Product material: the cabinet support hinge is made of stainless steel for durable, anti-rust & anti-corrosion. You can put them in outdoor. Simply contact us to make it right. Product size: the folding length of cabinet support hinge is 4. 6 inch / 117mm.
BrandJiozermi #ad
ManufacturerJiozermi #ad
Part NumberHJS2021092901



MY MIRONEY Stainless Steel Rotatable Folding Lid Support Hinge for Furniture Cabinet Pack of 2

MY MIRONEY #ad - This rotatable folding lid support hinge is suitable for wardrobes, windows, office racks, boxes, furniture cabinets, etc. Unfolded size:232 x 30 x 13mm/9. 1" x 1. 2"x 05"l*w*h. Mounting hole diameter:3. 5mm/01";mounting hole Distance:21mm/08". Folded size:122 x 30 x 17mm/4. 8" x 1. 2" x 07"l*w*h. Package contents:2 x Lid Support Hinges;Some Screws.
ManufacturerMY MIRONEY #ad
Part NumberAMT07200495

6. Selby Hardware


Lid Hinge Non Mortise Statuary Bronze

Selby Hardware #ad - For 3/4" material. Steel, brass plated. Lid hinge non Mortise BRASS. Opens 190degrees. Non-mortise.
BrandSelby Hardware #ad
ManufacturerSelby Hardware #ad
Part NumberH370PF34SB

7. douper


Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2

douper #ad - Never worry again about having to prop the lid open. Hinges will not work if your lid doesn’t match specified dimension and weight requirement. Holds lid open -- these hinges will hold your lid open until you push it down.

Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. And must with a 9 inch clearance.

Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”. Note: no adjustments on placement measurements of the hinge mounted on side board. Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs.
Branddouper #ad
ManufacturerDouper #ad
Height1 Inches
Length13 Inches
Width1 Inches
Part NumberDP057-TATAMI



Heavy Duty Lid Stay Hinges QBOSO Folding Lid Support Hinge,Perfect for Cabinet,Closet ,Wardrobe or Toybox 110 Degree Heavy Duty Style 1 Pair

MOYODOR #ad - Material - made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 35 lbs when use 2 pcs(up to 17. 5lbs - 1 lid Stay). Package - 2 pcs lid stays, Allen wrench and exclusive redesign Installation instruction are included.

These support hinges are well made and designed to support the lids of box, cabinet, such as mini toy box, wardrobe lids, closet, the enhanced version has the advantages of strong bearing capacity. Adjustable for different weights - with the allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.

Perfect for any lids or flaps when a soft closing motion is required, each lid stay can be used for right or left hand mounting, 110°, 90°, holds the door at any angle you want, upward door open adjustable angle of 75°, self adjust, .
BrandMOYODOR #ad
ManufacturerQBOSO #ad
Part NumberB07KMR4BZD



Wardrobe Toy Chamber Max Support 50lb/2pcs, Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Kitchen, Perfect for Cabinet, Keep Lid Hinge Open

RUYUFE #ad - Easy to install – only following the placement measurements on the instructions, you can easy to install lid stay. Never worry about having to support lid hinge anymore. Weight capacity 50lb—lid stay max weight support 50lbs/2pcs, lid support hinge can be mounted on the left or right side.

90°, upward door open adjustable angle of 75°, 110° by yourself. Durable material -- the up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Heavy toy chest lid to prevent fingers from getting smashed. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance.

Keep the lid open- the lid hinge will hold the lid open until you want to close. Allen wrench and exclusive redesign Installation instruction in package. Perfect for any lids or flaps when a soft closing motion is required. Lid support hinge usage—the lid support hinge support the lids of box, closet, cabinet, such as toy box, wardrobe lids.
BrandRUYUFE #ad
ManufacturerRUYUFE #ad



HONJIE Gold Folding Lid Support Hinges for for Home Furniture Cabinet Jewelry Box Decoration Pack of 4

HONJIE #ad - Unfolded size: 117 x 8. 5 x 1mm / 4. 61" x 033" x 004"l*w*t. Folded size:65x19x1mm/2. 55"x075"x004"l*w*t, mounting Hole Size: 3. 5mm / 014". Application:suitable for home office cupboard, showcase doors, closet, window, cabinet, jewelry case box etc. Feature:foldable, it can be open 135 degree rotating hinge, adjusting the degree you want to open. Package included: 4Pcs x lid support hinge with screws.
BrandHONJIE #ad
ManufacturerHONJIE #ad
Part NumberHJCP1588