Top 10 L298N Motor Drive – Electrical Motor Controls

As an Amazon Associate I earn from qualifying purchases.

1. AiTrip

#ad

4Pack L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

#ad
AiTrip #ad - Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability. This module can use built-in 78m05 for electric work via a driving power supply part.

But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Dual-channel H-bridge driver working mode creates higher working efficiency. Using l298n made by st company as the control chip, the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability.
BrandAiTrip #ad
ManufacturerAiTrip #ad

2. WMYCONGONG

#ad

WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino

#ad
WMYCONGONG #ad - Size: 43 * 43 * 27 mm/1. 69 * 1. 49 * 1. 06in. Package: 5 pcs l298N motor controller board module. L298n main driving chip, small heating value, high drive ability, strong anti-interference capability. With built-in 78m05 to supply power, when the driving voltage is greater than 12V, to avoid the damage of voltage regulator chip, please use the external 5V logic power supply. Dual h bridge dc stepper module, more stable and higher work efficiency.
BrandWMYCONGONG #ad
ManufacturerWGCD 1 #ad
Part NumberL298N-MOTOR-5P

3. HONBAY

#ad

Honbay L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove Nano Robo

#ad
HONBAY #ad - Dual-channel H-bridge driver working mode creates higher working efficiency. Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability.

But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. This module can use built-in 78m05 for electric work via a driving power supply part. L298n as main driver chip makes strong driving ability/small heating/strong. L298n has such characteristics as strong driving ability, low calorific value and strong anti-interference ability.
BrandHONBAY #ad
ManufacturerHonbay #ad
Part NumberL298N-1P

4. Sunhokey

#ad

Sunhokey L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino, 40pin Female to Female for, 40pin Male to Male, 120pcs Breadboard Jumper Wires 20cm Length 40pin Male to Female

#ad
Sunhokey #ad - High working power to 46v, large current can reach 3A MAX and continue current is 2A, the power to 25w. Dual-channel h-bridge driver working mode creates higher working efficiency, Use L298N as the main driving chip.

It uses a large-capacity filter capacitor and diode with freewheeling protection function, thereby improving the reliability of the module. This l298n board comes ready to go. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. Easy of use, no assembly required. Just wire up motors and power. With built-in 78m05 to supply power, when the driving voltage is greater than 12V, to avoid the damage of voltage regulator chip, please use the external 5V logic power supply.
BrandSunhokey #ad
ManufacturerSunhokey #ad

5. UPUNER

#ad

Dual H-bridge robot stepper motor control, used for Arduino smart car power supply UNO MEGA R3 Mega2560 2PCS, L298N motor driver controller board module

#ad
UPUNER #ad - Dual channel H-bridge driver working mode can improve working efficiency. 3. However, to avoid damage to the voltage regulator chip, when using a drive voltage of more than 12V, please use an external 5V logic power supply.

The module adopts st l298n chipset, which has the characteristics of strong driving ability, low heat generation and strong anti-interference ability. 5. The l298n module has a large-capacity filter capacitor, which can follow the current to protect the diode and improve reliability. 2. 1. To avoid damage to the voltage regulator chip, when using a drive voltage exceeding 12V, please use an external 5V logic power supply. 4. The module can use the built-in 78m05 for electrical work through the drive power section.
BrandUPUNER #ad
ManufacturerChangShaLenJinShanGMaoYouXianGongSi #ad

6. Envistia Mall

#ad

L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Pack of 2

#ad
Envistia Mall #ad - Package of 2 drivers. Accepts standard ttl logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V. Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability. Dual-channel l298n h-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
BrandEnvistia Mall #ad
ManufacturerUnbranded/Generic #ad
Part Number2X L298N

7. Solu

#ad

Solu Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for Arduino//L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

#ad
Solu #ad - The estimated delivery time offered by Amazon is not the real time. Can drive one 2-phase stepper motor, low heat, one 4-phase stepper motor or two DC motors. L298n as main chip, outstanding anti-interference performance.

What we pursue is your satisfication of our service, not just for our goods. For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. Usually, you will get it actually in 9~19 days, if you are in the usa and the item is not fulfilled by Amazon. High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w. We will reply you about any question you ask within 24 hours.

Built-in 78m05, when drive power over12V, however, get power from drive power, please use the external 5v power as power supply. Your patience is highly appreciated. About us solu, professional factory of circuit boards, welcome to our store for more choices with best price. Hope you will receive your item soon and enjoy using it. The item will be sent to you by USPS with shipping information from China.
BrandSolu #ad
Manufacturersolu #ad
Weight0.02 Pounds
Part NumberCECOMINOD005131
ModelCECOMINOD005131

8. Aideepen

#ad

Aideepen 2pcs L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module for Arduino

#ad
Aideepen #ad - High working power to 46v, large current can reach 3A max and continue current is 2A, power to 25w. Low heat, outstanding anti-interference performance. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. Built-in 78m05, get power from drive power. Main chip: st l298n, double H bridge drive.
BrandAideepen #ad
ManufacturerAideepen #ad
Part Number0100752

9. XiaoR GEEK

#ad

L298N Motor Drive Controller Board Module dual H-Bridge DC Stepper Motor Driver for UNO R3/Mega 2560/Raspberry Pi Smart Robot Car

#ad
XiaoR GEEK #ad - Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. Our motor regulator board drive voltage is 5V-35V, drive current is 2A, max power is 25W.

L298n h-bridge motor controller working mode creates higher working efficiency, L298N as main chip, ST corporation production. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
BrandXiaoR GEEK #ad
ManufacturerWiFi Robot #ad
Part NumberXR-L298

10. Ardest

#ad

L298N Dual H-Bridge Motor Drive Controller for Arduino Smart Car Robot Power Stepper Motor Driver Module

#ad
Ardest #ad - L298n dual motor controller module is a neat motor control module based on the L298N H-bridge IC that can allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease.

Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. L298n as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Well built dual-channel H-bridge driver working mode creates higher working efficiency.
BrandArdest #ad
ManufacturerArdest #ad
Height26 Millimeters
Length43 Millimeters
Width43 Millimeters
Part NumberMotor Drive Controller