As an Amazon Associate I earn from qualifying purchases.
Kreg #ad - The new kreg micro pocket drill guide allows woodworkers to drill a pocket-hole. The smaller pocket-hole and shorter 3/4-Inch pan head screws work to secure thinner materials.
Features full compatibility with spacer blocks. Removable design is perfect for repairs and job-site joinery. Drill guide works in the Kreg Jig or Kreg Jig master system. Features full compatibility with spacer blocks. Fully compatible with the Kreg Jig and Kreg Jig Master System.
Kreg #ad - Cut multiple pieces to the same size With just one setup. Eliminate need for marking, measuring, and layout lines. Use the oversize edge guide for precise control throughout the cut.
Kreg #ad - Handy for repair applications and space constricted areas. Makes pocket Hole joinery work easier. No-fence design makes for easy positioning. Includes 3/8-inch step drill bit, depth Collar, and Allen wrench. One-hole jig is great for furniture repairs or flooring work.
Milescraft #ad - Adjustable depth stop and spring action control of the head. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key.
Milescraft #ad - Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces. Package dimensions:3.
Kreg Tool #ad - The large face of the clamp keeps the joint perfectly flush. 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. Unique clamp designed specifically for pocket-screw joinery. Used primarily for securing individual joints while pocket-screws are being driven.
General Tools #ad - Use the jig to drill steeply pitched counter bores in one joint member, then drive self-tapping screws without pilot holes into the other member. Screw starter tool: diyers and expert artisans turn to our jig kit to build their wooden projects.
The hard plastic carrying case is convenient when bouncing back and forth from home to the shop. Pocket hole set: our easy-to-use tool creates corner and angle pocket hole joints for leg-and-rail connections, and securing picture frames, building face frame cabinets, sneaking screws into tight spots, with unlimited applications.
Woodworking starter kit: you have access to 25 coarse drive screws, 25 fine square, and 25 wooden hole plugs to complete your projects. We encourage artisans and DIYers to work smarter, measure better, and repair more productively. General tools: we're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service.
Muzata #ad - Clamp the space rather than the bushing, please search 'F clamp', otherwise it may not hold securely. This handrail drill guide work with 6” woodworking f clamp no shaking and safer drilling angle 30 degree inclined hole and 90°horizontal vertical straight hole for 4”x4” posts and lager clamp for lager posts.
Our experts can do all the planning, designing, and budget works for you without extra charging. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Then you can follow the shopping list to buy all the materials in 3 minutes. Various hole sizes –this cable railing drill template guide jig offers 4 different size guide track holes fit 3/16”, 3/8” drill bit, 5/16”, 1/4”, those are compatible with most cable railing kit hardware.
Accurate and multi-angle -this cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight hole and 45 degree angled hole for the wood railing post. It includes: cable railing kits ck01 or cn09; accessories cr13 cr66; wire rope wr01 or wr03; Tools CT21 CR12 CR09 or CT03; Plz scroll down to" product description" or download the user guide PDF for complete system information. Free design service - if you are a beginner or not sure about how to do it. F clamp is not included, then choose a size larger than 8 inches.
POWERTEC #ad - Superior clamping force: delivers consistently secure placement and safe Clamp action for a seamless workflow. They will not work in universal or ¼” t-track. Please note: the clamp ends have a specific profile, see the image for details.
They are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic.
Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth. Please check the size of your t-track to verify that the clamps will work for your application.
1. Kreg
#adKreg KJMICRODGB Jig Micro Drill Guide System,Black Polymer
#adFeatures full compatibility with spacer blocks. Removable design is perfect for repairs and job-site joinery. Drill guide works in the Kreg Jig or Kreg Jig master system. Features full compatibility with spacer blocks. Fully compatible with the Kreg Jig and Kreg Jig Master System.
More information #ad
Smaller pocket-hole is less noticeable on exposed joints. Drill guide works in the Kreg Jig or Kreg Jig master system. Removable design is perfect for repairs and job-site joinery. Smaller pocket-hole is less noticeable on exposed joints. Black color makes it easy to differentiate from the standard drill guide. Black color makes it easy to differentiate from the standard drill guide.| Brand | Kreg #ad |
| Manufacturer | Kreg #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 1 Pounds |
| Width | 0 Inches |
| Part Number | KJMICRODGB |
| Model | KJMICRODGB |
More information #ad
2. Kreg
#adKreg Micro Pocket Drill Guide Kit for K3 and K4 Kreg Jig
#adKreg #ad - Reduced width lets you drill two holes across extremely narrow stock, down to 1” wide. Perfect for creating fully pluggable Pocket-Holes in ½” thick material like drawer boxes.More information #ad
Fully compatible with the Kreg Jig and Kreg Jig Master System. Includes the micro pocket drill Guide, Micro Pocket Drill Bit, Micro Pocket Depth Collar and Star. Features black color to differentiate from standard Drill Guide.| Brand | Kreg #ad |
| Manufacturer | Kreg Tool Company #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.96 Pounds |
| Width | 0 Inches |
| Part Number | KJMICRODGB |
| Model | KJMICRODGB |
More information #ad
3. Kreg
#adBlue, Kreg KMA2685 Rip-Cut Circular Saw Guide
#adMore information #ad
Take your saw to the material instead of having to take your material to the saw. Make rip cuts and crosscuts up to 24" Wide.| Brand | Kreg #ad |
| Manufacturer | Kreg #ad |
| Height | 2.5 Inches |
| Length | 30.88 Inches |
| Weight | 2.45 Pounds |
| Width | 8.75 Inches |
| Part Number | KMA2685 |
| Model | KMA2685 |
| Warranty | 90 day warranty |
More information #ad
4. Kreg
#adKreg MKJKIT Mini Kreg Jig Kit
#adMore information #ad
| Brand | Kreg #ad |
| Manufacturer | Kreg #ad |
| Height | 3.5 Inches |
| Length | 1.25 Inches |
| Weight | 0.4 Pounds |
| Width | 9.25 Inches |
| Part Number | MKJKIT |
| Model | MKJKIT |
| Warranty | LIMITED |
More information #ad
5. Milescraft
#adCompatible with most 3/8 in. Drill Accessories, Multi-Angle Drill Guide Attachment, Multi-Angle Readouts, Self-Centering Drill Guide Base, Milescraft 1318 DrillMate Portable Drill Guide
#adMore information #ad
Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter.| Brand | Milescraft #ad |
| Manufacturer | Milescraft Inc. #ad |
| Height | 2 Inches |
| Length | 16.63 Inches |
| Weight | 0 Pounds |
| Width | 7.13 Inches |
| Part Number | 1318 |
| Model | 1318 |
More information #ad
6. Milescraft
#adMilescraft 1312 DrillBlock- Handheld Drill Guide
#adMore information #ad
05"l x 5. 33"w x 14. 48"h. Centerlines ensure accurate alignment when drilling into various surfaces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too.| Brand | Milescraft #ad |
| Manufacturer | Milescraft Inc. #ad |
| Height | 1.25 Inches |
| Length | 8 Inches |
| Weight | 0.29 Pounds |
| Width | 2.75 Inches |
| Part Number | 13120103 |
| Model | 1312 |
More information #ad
7. Kreg Tool
#adKreg KHC-Premium Face Clamp
#adMore information #ad
| Brand | Kreg Tool #ad |
| Manufacturer | Kreg #ad |
| Height | 8.25 Inches |
| Length | 9 Inches |
| Weight | 3 Pounds |
| Width | 32.5 Inches |
| Part Number | KHC-PREMIUM |
| Model | KHC-PREMIUM |
More information #ad
8. General Tools
#adAll-In-One Aluminum Pocket System with Carrying Case, General Tools Woodworking Pocket Hole Jig Kit
#adThe hard plastic carrying case is convenient when bouncing back and forth from home to the shop. Pocket hole set: our easy-to-use tool creates corner and angle pocket hole joints for leg-and-rail connections, and securing picture frames, building face frame cabinets, sneaking screws into tight spots, with unlimited applications.
More information #ad
Our wood products are compliant with Forest Stewardship Council FSC. Angled drill guide: the drilling kit includes a pocket hole jig with a clamp, replaceable #32 - 3/8" step drill bit, 3/8" steel stop collar, and a hex wrench 6" square drive bit. Woodworking starter kit: you have access to 25 coarse drive screws, 25 fine square, and 25 wooden hole plugs to complete your projects. We encourage artisans and DIYers to work smarter, measure better, and repair more productively. General tools: we're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service.
| Brand | General Tools #ad |
| Manufacturer | General Tools #ad |
| Height | 9.4 Inches |
| Length | 2.5 Inches |
| Weight | 48 ounces |
| Width | 9.5 Inches |
| Part Number | 850 |
| Model | 850 Pocket Hole Jig |
| Warranty | 1 year parts |
More information #ad
9. Muzata
#adMuzata Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Visible Drilling Template Jig, Fit 90 Degree Horizontal Deck and 45 Degree Angled Stair, Patent Design CT10,CT1
#adOur experts can do all the planning, designing, and budget works for you without extra charging. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Then you can follow the shopping list to buy all the materials in 3 minutes. Various hole sizes –this cable railing drill template guide jig offers 4 different size guide track holes fit 3/16”, 3/8” drill bit, 5/16”, 1/4”, those are compatible with most cable railing kit hardware.
More information #ad
The fastening steel sleeve can prevent the steel sleeve from falling off during drilling. You can fix the steel sleeves by tightening the anchor screws. Accurate and multi-angle -this cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight hole and 45 degree angled hole for the wood railing post. It includes: cable railing kits ck01 or cn09; accessories cr13 cr66; wire rope wr01 or wr03; Tools CT21 CR12 CR09 or CT03; Plz scroll down to" product description" or download the user guide PDF for complete system information. Free design service - if you are a beginner or not sure about how to do it. F clamp is not included, then choose a size larger than 8 inches.
| Brand | Muzata #ad |
| Manufacturer | MUZATA #ad |
| Part Number | MZZ690 |
More information #ad
10. POWERTEC
#ad5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack, POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System
#adThey are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic.
More information #ad
Versatility: these rail clamps provide a portable clamping option for Festool, Bosh and similar sized track saw guides, Makita, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots see image for size. Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth. Please check the size of your t-track to verify that the clamps will work for your application.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1 Inches |
| Length | 7.5 Inches |
| Width | 4.5 Inches |
| Part Number | 71410 |
| Model | 71410 |
More information #ad
