Top 10 Festoon Track Saw Kit – Power Circular Saws

As an Amazon Associate I earn from qualifying purchases.

1. Evolution


Evolution, 027-0004C Power Tools R185CCSX 7-1/4" Multi-Material Circular Track Saw Kit w/ 40" Track

Evolution #ad - 0-45˚ bevel tilt with pivot for compatible and precise cutting capabilities. Includes 40 inch track, ergonomic soft grip handles, dust extraction port & adaptor, and premium 7-1/4 inch blade. Powerful 15 amp, hi-torque motor accurately cuts with an adjustable 2 - 1/2 inch depth. Manufacturers 3 year limited warranty. Designed to cut a wide range of materials without changing blades.
BrandEvolution #ad
ManufacturerEvolution Power Tools #ad
Part Number027-0004C
Warranty3 Year Limited Warranty

2. Festool


Festool TS 55 REQ-F Plus FS w/55" Rail 576012

Festool #ad - The track saws flat housing allows for flush cutting. The festool ts 55 is not your standard circular saw. The ts 55 track saw works seamlessly with it's integrated rail, available in various sizes.

Breaking down sheet goods? cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment. Utilize the rail and saw with or without a table or work surface. The saw rides on a guide rail, miter saws and panel saws. The ts 55 track saw delivers precise, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, splinter free, or track, glue ready cuts and only takes seconds to setup.
BrandFestool #ad
ManufacturerFestool #ad
Height13 Inches
Length60 Inches
Weight24.2 Pounds
Width17 Inches



Circular Saw Track Circular Saw Track

KREG #ad - Simply align the guide Track with your marks to make accurate cuts. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Hold track in place without clamps thanks to anti-slip guide strips. Prevent splintering with anti-chip strips that support material during the cut. Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels.
BrandKREG #ad
ManufacturerKreg #ad
Height2.5 Inches
Length27.5 Inches
Weight5.05 Pounds
Width8.75 Inches
Part NumberKMA2700
Warranty90 day warranty

4. Kreg


Kreg KMA2685 Rip-Cut Circular Saw Guide

Kreg #ad - Eliminate need for marking, measuring, and layout lines. Make rip cuts and crosscuts up to 24" Wide. Cut multiple pieces to the same size With just one setup. Use the oversize edge guide for precise control throughout the cut. Take your saw to the material instead of having to take your material to the saw.
BrandKreg #ad
ManufacturerKreg #ad
Height2.5 Inches
Length30.88 Inches
Weight2.45 Pounds
Width8.75 Inches
Part NumberKMA2685
Warranty90 day warranty

5. Makita


With Stackable Tool case and 55" Guide Rail, Makita SP6000J1 6-1/2" Plunge Circular Saw Kit, Blue

Makita #ad - Bevel capability -1 to 48° with positive stops at 22. 5° and 45°. Power Type- Corded. Powerful 12. 0 amp motor for optimum performance in a wide variety of materials.

Variable speed control dial 2, 000-5, 200 RPM enables user to match the speed to the application. Electronic speed control maintains constant speed under load for smooth cutting. Large cutting capacity 2-3/16" at 90° and 1-9/16" at 45°. Makita sp6000j1 6-1/2" plunge circular saw Kit, with Stackable Tool case and 55" Guide Rail. Large cutting capacity 2-3/16" at 90° and 1-9/16" at 45°. Bevel capability -1 to 48° with positive stops at 22. 5° and 45°. Precision accurate cutting delivers a splinter-free mirror finish. 12 amp motor with variable speed control dial 2, 000 - 5, 200 RPM for optimum performance in a variety of materials.
BrandMakita #ad
ManufacturerMakita #ad
Height14 Inches
Length12 Inches
Weight16.5 Pounds
Width59 Inches
Part NumberSP6000J1

6. WEN


WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw

WEN #ad - Create 45-degree bevel cuts in boards up to 1-5/8 inches thick. Compatible with the wen ct9502 100-inch track and the WEN CT992F Track Saw Clamps. Includes a 6. 5-inch 24-tooth carbide-tipped blade 165 mm with a 20 mm arbor. Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts. Perfect for ripping boards or for performing internal plunge cuts.
BrandWEN #ad
ManufacturerWEN #ad
Part NumberCT1065

7. Festool


Festool 575387 Plunge Cut Track Saw Ts 55 Req-F-Plus USA

Festool #ad - Spring-loaded riving knife splitter keeps the cut kerf open so that the material does not pinch the blade. Power consumption 1200 watt. When used with festool guide rails, you can achieve perfectly straight and splinter-free cuts. Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal. This reduces the chance of kickback. Antistatic function.
BrandFestool #ad
ManufacturerFESTOOL #ad
Height32.5 Inches
Length39.5 Inches
Weight7.69 Pounds
Width29.5 Inches
Part Number575387
Warranty36 Mo. Service All Inclusive



POWERTEC 71387 55” Guide Rail Joining Set | Includes 2 Aluminum Extruded Guided Rails and 2 Guide Rail Connectors for Woodworking Projects | Compatible with Makita or Festool Track Saws

POWERTEC #ad - Function: this exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail. Kit includes: 2 55” guide rails and 2 track saw guide rail connectors.

Compatibility: the 55” guide rails is compatible with Makita plunge saw and Festool track saws. Plus you can easily customize length using the powertec saw guide rail connector kit, or fits Makita connector or Festool Connector for longer cuts. Premium quality: made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects. Additionally, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, such as routers.
ManufacturerPOWERTEC #ad
Height2.75 Inches
Length58 Inches
Width8.25 Inches
Part Number71387



6-1/2-Inch, DEWALT FLEXVOLT 60V MAX Circular Saw, Cordless TrackSaw Kit DCS520T1

DEWALT #ad - For use with trackSawTM dual edged tracks for perfectly straight cuts. Straight plunge mechanism for optimal ergonomics. Nominal voltage is 18. Enclosed low profile guard gives a 90% dust extraction capability. Continuous anti-Kickback mechanism and riving knife prevent kickback when engaged. Maximum initial battery voltage measured without a workload is 20 volts. Zero clearance trackSawTM cutting system delivers straight, splinter-free, precise cuts.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height10 Inches
Length12 Inches
Weight12.5 Pounds
Width10 Inches
Part NumberDCS520T1
Warranty3 year limited warranty

10. Makita


Makita 194368-5 55" Guide Rail

Makita #ad - 55" guide rail for use with makita plunge Saw models XPS01, XPS02, and SP6000J. Ideal for ripping sheet material. Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting. Alternate use with select routers and circular saws, must use with router guide rail adapter 194579-2 and saw guide rail adapter 196953-0 .
BrandMakita #ad
ManufacturerMakita #ad
Height0.43 Inches
Length55.11 Inches
Weight6.61 Pounds
Width7.28 Inches
Part Number194368-5