Top 10 Countdown Timer No Neutral – Wall Timer Switches

As an Amazon Associate I earn from qualifying purchases.

1. GE

#ad

5-15-30 Minute/1-2-4 Hour, 15318 , Wall Plate Included, GE Push-Button Countdown Timer Switch, Ideal for Lights, White, Heaters, ON/Off, No Neutral Wire Needed, Exhaust Fans

#ad
GE #ad - Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Choose from the following preset countdowns: 5 min, 2 hour, 15 min, 1 hour, 30 min, or 4 hour.

Led lights will stay on when wired device is ON without an end time. Timer is great for use with lights, and heaters. Easy direct wire installation; does not require a neutral wire ground wire is required. Includes a single décor wall plate and fits most single or multi-gang rocker plates. Blue led indicator lights show last used preset blinks every 20 seconds. Compatible with incandescent, exhaust fans, CFL and LED bulbs. On/off push button also allows you to turn the wired device ON or OFF without an end time. Ratings – 125vac 60 Hz: 6. 4a resistive, 800va ballast, 800W Tungsten, 1/4 HP.
BrandGE #ad
ManufacturerJasco Products Company, LLC #ad
Height6.88 Inches
Length2.24 Inches
Weight0.29 Pounds
Width4.78 Inches
Part Number15318
Model15318

2. ENERLITES

#ad

ENERLITES 4-Hour Countdown Timer Switch, 2-4 Hour, White, For Bathroom Fans, 120VAC 800W, No Neutral Wire Required, 5-10-30-60 Min, HET06-J-W, Lights, Heaters, LED Indicator, UL Listed

#ad
ENERLITES #ad - Six timer options to choose from: 5 min, 30 min, 60 min, 10 min, 2 hour and 4 hour; manual button can overrides the timer to turn light or fan on or off without delay. Neutral not required ground wire required; 120vac 60hz, led/cfl: 150w, incandescent/halogen: 800w, motor: 1/4hp; operating temperature 32°F to 131°F; UL 94 V2 flammability rating; Single Pole Switch; UL listed; 1-year warranty; Wall Plate sold separately.

When time delay is selected, the blue led indicator will flasH TWICE to indicate setting success THEN TURN OFF. Automatically turns a load off on a countdown timer; saves energy by ensuring lights are always turned off. Perfect for lights, bathroom fans and heaters, ceiling fans, and any other appliances that are usually forgotten. Replace most wall switches. It will be an ideal choice if you control the lights in the bedroom.
BrandENERLITES #ad
ManufacturerENERLITES #ad
Height2.75 Inches
Length1.71 Inches
Width1.47 Inches
Part NumberHET06-J-W
ModelHET06-J-W

3. UltraPro

#ad

No Neutral Wire Needed, Exhaust Fans, Pumps, Mechanical Switch, Spring Wound, White, Single-Pole, Heaters, 47977, Ideal for Lights, UltraPro Honeywell 60-Minute Countdown in-Wall Timer 2 Pack

#ad
UltraPro #ad - Face plates - includes white and light almond face plates to match existing switches and fits single- or multi-gang standard and rocker plates to integrate with your home.

Ideal use – the in-wall timer is perfect for lights exhaust fans heaters pumps and is compatible with LED CFL and incandescent lighting. Electrical ratings – 125vac 50/60 hz 20a general/resistive 7a tungsten 1hp motor 250VAC 50/60 Hz 10A general/resistive 2HP motor 277VAC 50/60 Hz 10A general/resistive. 60-minute countdown – the dial operation makes setting the countdown easy and fast turn the dial to provide power for up to 60 minutes. Easy to install – the single-pole timer and no neutral wire required simplifies installation saving you time and energy.
BrandUltraPro #ad
ManufacturerJasco Products Company #ad
Height1.81 Inches
Length4.13 Inches
Width1.75 Inches
Part Number47977
Model47977

4. GE

#ad

No Neutral Wire Needed, Exhaust Fans, Up to 60 Minutes, 15304, Spring Wound, GE In-Wall Mechanical Countdown Timer Switch, Ideal for Lights, Heaters, White & Light Almond Wallplates

#ad
GE #ad - Incandescent, CFL and LED compatible. Spring-wound timer counts down to shut off at desired time. 250vac, 50/60 hz: 20 a res.

Easy to install – no neutral wire needed. Wall plate not included. Directly wire this timer into a standard light switch standard toggle or decorator plate. Gen. 2 hp. Ideal for use with lights, heaters, exhaust fans, pumps and other appliances. Electrical ratings: 125vac, 1 hp. 277vac, 7 a tungsten, 50/60 Hz: 10 A Res. Gen. Up to 60-minute countdown at 1-minute intervals. Gen. 50/60 hz: 10a res. Includes white and light almond pieces to match your homes décor.
BrandGE #ad
ManufacturerGE #ad
Height7 Inches
Length4 Inches
Weight0.4 Pounds
Width5 Inches
Part Number15304
Model15304

5. ENERLITES

#ad

5-10-30-60 Min, Lights, ENERLITES 4-Hour Countdown Timer Switch, 2-4 Hour, LED Indicator, No Neutral Wire Required, White, Heaters, for Bathroom Fans, UL Listed, 2 Pack, HET06-J-W-2PCS, 120VAC 800W

#ad
ENERLITES #ad - Blue led indicators feature two modes; mode 1: led flashes twice indicating setting success then stays OFF; mode 2: LED stays ON during the selected time delay then shuts OFF.

2 pack; neutral not required, led/cfl: 150w, incandescent/halogen: 800w, ground wire required; 120vac 60hz, motor: 1/4Hp; operating temperature 32°F to 131°F; UL 94 V2 flammability rating; UL listed; 1-year warranty. Six countdown timer options to choose from: 5 min, 2 hour, 60 min, 30 min, 10 min, and 4 hour; manual ON/OFF button overrides the timer. Automatically turns a load off on a countdown timer; saves energy by ensuring the light or fan is never left ON by mistake. Perfect for lights, ceiling fans, heaters, bathroom fans, and any other appliances that are commonly forgotten.
BrandENERLITES #ad
ManufacturerENERLITES #ad
Height2.75 Inches
Length1.7 Inches
Weight0.6 Pounds
Width1.47 Inches
Part NumberLIYIN-1022
ModelHET06-J-W-2PCS

6. Eaton

#ad

White, 60 Min Off, 10, 15, 5, EATON PT18M-W-K Accell Core Programmable Timer, 120 V, 30

#ad
Eaton #ad - Compatible with incandescent/halogen, fluorescent/compact fluorescent, Magnetic low-voltage, electronic low-voltage, and LED light sources. Comes with an override off button that allows you to easily bypass the timing function and turn the power off immediately. Designed to be used in 15-amp, 120-Volt, and single-pole applications and is rated for 1800-watts.
BrandEaton #ad
ManufacturerEATON #ad
Height6.61 Inches
Length9.01 Inches
Weight0.05 Pounds
Width4.4 Inches
Part NumberPT18M-W
ModelPT18M-W-K

7. BN-LINK

#ad

BN-LINK Heavy Duty 60-Minute in-Wall Spring Loaded Countdown Timer, 2 Free Plate White and Silver Metallic, Mechanical Switch,for Bathroom Fan,Lights Timer

#ad
BN-LINK #ad - Easily installs in place of existing wall switch, Fits any single or multi-Gang decorator or toggle switch plate. Automatically turns off after selected time, up to 60 minutes. Wall plate Included. Directly wire this timer into a standard light switch standard toggle or decorator plate. Ratings: 125-volt, 625 w ballast, 1000-Watt tungsten/5-Amp, 60 Hz.20-amp, 1 HP. Works with lamps, 2500-watt resistive/8-amp, fans and other appliances.
BrandBN-LINK #ad
ManufacturerCentury Products #ad
Height2 Inches
Length4.1 Inches
Weight0.35 Pounds
Width2 Inches
Part NumberBND-60/U48
ModelBND-60/U48

8. MOES

#ad

MOES WiFi Smart Light Switch No Neutral Wire,No Capacitor,No hub Required Single Live Wire Push Button,Tuya Smart Life App Remote Control Work with Alexa and Google Home,110v Minimum 7W,White

#ad
MOES #ad - 3. No capacitance & no hub requierd differ in features from traditional single live wire switch. 5. Advantages & note no neutral wire required, no hub required and only for 1 way circuit as single pole switch; Only supports 2. 4g network(not 5G; Minimum control 7 watts. Easily get intelligent remote controls on smart phones.

4. App & voice control compatible with alexa and google home. Overloading and overheating supported for your safety and wonderful user experience. This smart switch is featured as no capacitor installation required for normal and stable use, no more worry about the noise sound from the capacitor for better user experience. 2. Wide range of applications work with minimum wattage 7W, Up to 1000W for incandescent/halogen and 350W for LED. After the wiring is completed, No capacitor required, you need to power on for 2-3 minutes before using the product for the first time. Includes full 2-year warranty and 60-day refund guarantee for complete satisfaction.

No neutral wire required easily installed without rewiring your existing wire with single live wire design; Fire-retardant material and no electric arc new technology to guarantee secure and reliable working, giving the best look to blend with any wall design. Multi-control association to another smart switch in smart life App is enabled for this new version, it is able to be controlled by various ways alone without interference with the best value like App control, manual control, perfectly solving the issue of other smart single live wire versions as complex wiring restrictions.
BrandMOES #ad
ManufacturerWenzhou Nova New Energy Co.,LTD #ad
Part NumberWS-SS-US1-L110-WH-MS

9. UltraPro

#ad

Automatic Lighting Schedule – 40955, ON/Off Override Button, Easy-to-Program Timer, White, to-The-Minute Countdown, UltraPro 24-Hour Digital in-Wall, Daily presets, 1 Pack

#ad
UltraPro #ad - Easy-to-program custom settings, presets and countdown options accommodate any schedule. 24-hour cycle provides daily control. Large lcd display offers easy viewing of settings and time. Replaces single-pole or three-way switches to control LED, CFL, incandescent and halogen bulbs, and other fixtures. Convenient door in white and light almond conceals programming buttons and functions as ON/OFF switch.
BrandUltraPro #ad
ManufacturerJasco Products Company #ad
Height4 Inches
Length1.75 Inches
Width1.75 Inches
Part Number40955
Model40955
Warranty2-year limited

10. Woods

#ad

Woods 59020 In-Wall Digital 7-Day Programmable Timer with No Neutral Wire, 60-Hertz / 6.4-Amp Resistive / 800-Watt Tungsten / 800 VA Ballast/Up to 1/4-Horsepower, White, 125-Volt

#ad
Woods #ad - In-wall 7 day digital times allows you to program up to 18 ON/OFF settings, that repeat weekly. May be ganged with other switches.

No neutral wire required for easy installatION, and self-recharging battery stores program. Great for automating overhead lighting, ceiling fans, porch lighting or other outlets controlled by a wall switch so you arrive to a safe and secure home. Cfl, led, incandescent compatible. 125v, 60hz, 1000w tungsten, 15a general use/resistive, 1/4hp, 1000VA Ballast. Note: kindly refer the user manual which is available below for guidanCE. Conveniently programmable to the minute.
BrandWoods #ad
ManufacturerWoods #ad
Height4.5 Inches
Length2 Inches
Weight0.5 Pounds
Width2.75 Inches
Part Number59020AC
Model59020