As an Amazon Associate I earn from qualifying purchases.






Blade serrations spread cutting force across jaws improving cut quality and tool life. Ergonomic, single handed latch operation for left or right handed use. Free float design on the pivot bolt provides longer life. Handles have built in stops providing consistent operation and blade opening.


Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Easy and fast to cut 14 gauge material and creates a precision, burr free edge.

Easy cutting - compound leverage multiplies handle force to cutting blades by 8: 1 for significantly less fatigue. Made in usa. 2 piece offset set - this set includes both left and right cut offset models for optimal cutting ability.
1. Malco
#ad
Malco TSCM Corrugated Metal Turbo Shear
#adMalco #ad - Able to cut curves and straight lines. 360 degree rotating head for optimum tool clearance and material flow. Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns. Attaches to a drill or impact driver you already own. Made in the USA.More information #ad
Brand | Malco #ad |
Manufacturer | Malco #ad |
Height | 4.5 Inches |
Length | 7.75 Inches |
Width | 16.75 Inches |
Part Number | TCSM |
Model | TCSM |
More information #ad
2. Malco
#ad
Malco TSMD Corrugated Metal Turbo Shear Attachment
#adMalco #ad - Produces clean edge on both sides of cut. Cuts through seams. Approaches cut from either end. Navigates 90° outside profiles. Fits a drill you already own.More information #ad
Brand | Malco #ad |
Manufacturer | Malco #ad |
Height | 4.5 Inches |
Length | 7.75 Inches |
Width | 17 Inches |
Part Number | TSMD |
Model | TSMD |
Warranty | Limited Lifetime |
More information #ad
3. Dewalt
#ad
DEWALT Metal Shears Attachment, Impact Ready DWASHRIR
#adDewalt #ad - Connects via standard 1/4-inch hex shank. Able to cut up to 18GA material. Connects via standard 1/4-inch hex shank. Able to cut up to 18GA material.More information #ad
360 degree swivel head for maneuverability. Compatible with most 18V-20V impact driver and drills. Compatible with most 18V-20V impact driver and drills.Brand | Dewalt #ad |
Manufacturer | Dewalt #ad |
Height | 11.75 Inches |
Length | 5.88 Inches |
Weight | 1.59 Pounds |
Width | 2.75 Inches |
Part Number | DWASHRIR |
Model | DWASHRIR |
More information #ad
4. WEN
#ad
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
#adWEN #ad - Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute. Attack up to 20 gauge stainless steel and 18 gauge sheet metal.More information #ad
Utilizes a powerful 4-amp motor, curling the metal as it cuts. Lightweight design limits fatigue during operation. Swiveling head rotates a full 360 degrees to meet the needs of any project.Brand | WEN #ad |
Manufacturer | WEN #ad |
Height | 3 Inches |
Length | 11 Inches |
Weight | 4.7 Pounds |
Width | 8 Inches |
Part Number | 3650 |
Model | 3650 |
Warranty | 2 years |
More information #ad
5. Makita
#ad
Makita JN1601 Sheet Metal Nibbler, 120V,Blue, 5.0 A, 16 Ga
#adMakita #ad - Wrench 781028-4, jn3201, hex wrench 783208-8, JN3200. Double insulated. Large 1/4"" stroke. For easy handling. Overall Length : 1025 inches. Built-in thickness gauge for convenience. Extremely light weighs only 3.More information #ad
6 lbs. Easy punch and die replacement for reduced down time. Ergonomic, slim body design for easy gripping. Lock-on sliding switch for continuous operation. Die rotates 360°. Clean and precise work in keystone plate, deck plate and other corrugated sheet materials.Brand | Makita #ad |
Manufacturer | Makita #ad |
Height | 8.27 Inches |
Length | 12.4 Inches |
Weight | 3.53 Pounds |
Width | 3.35 Inches |
Part Number | JN1601 |
Model | JN1601 |
Warranty | Manufacturer |
More information #ad
6. Malco
#ad
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
#adMalco #ad - Turns your power drill into a heavy duty power shear. Clamping devise is included. Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct.More information #ad
Made in the USA. Replaceable blades. Inserts into the chuck of a 14. 4 volt or larger A/C or cordless drill. Navigates tight patterns and square cuts.Brand | Malco #ad |
Manufacturer | Malco #ad |
Height | 2.67 Inches |
Length | 15 Inches |
Weight | 2.27 Pounds |
Width | 7.12 Inches |
Part Number | TSHD |
Model | TSHD |
More information #ad
7. Wiss
#ad
M3R, Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips, Left and Right Cut, Straight
#adWiss #ad - Designed, engineered, and manufactured in the USA. Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel.Blade serrations spread cutting force across jaws improving cut quality and tool life. Ergonomic, single handed latch operation for left or right handed use. Free float design on the pivot bolt provides longer life. Handles have built in stops providing consistent operation and blade opening.
More information #ad
Spring action for fast, effortless feed. Cuts straight and slight curves with yellow handles for quick identification. Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs. Ergonomic, single material non slip handle grips provide excellent control and easy cleaning with built in hang hole for convenient storage.Brand | Wiss #ad |
Manufacturer | CRESCENT #ad |
Height | 1 Inches |
Length | 9.75 Inches |
Weight | 0.75 Pounds |
Width | 3 Inches |
Part Number | M3R |
Model | M3R |
Warranty | Standard Limited Lifetime |
More information #ad
8. Malco
#ad
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
#adMalco #ad - Inserts into chuck of an A/C or cordless drill. Turns your power drill into a power shear. 20 gauge capacity in galvanized steel. Tsdc drill clamp can be purchased separately. Made in the USA. Navigates tight patterns and square cuts.More information #ad
Brand | Malco #ad |
Manufacturer | Malco #ad |
Height | 1 Inches |
Length | 8 Inches |
Weight | 1 Pounds |
Width | 4 Inches |
Part Number | TS1 |
Model | TS1XXX |
Warranty | 1 Year |
More information #ad
9. REXBETI
#ad
Double Headed Sheet Metal Nibbler, Perfect for Straight Curve and Circle Cutting gold, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit
#adREXBETI #ad - Hss cutting blades to cut including but not limited to: Sheet metal, complex profiles, pipes, stainless steel, aluminium, formica, powder coated material, corrugated material, copper, plastic, fibreglass.Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Easy and fast to cut 14 gauge material and creates a precision, burr free edge.
More information #ad
Rexbeti versatile sheet metal nibbler, perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets. 360 degree double cutting head to cut straight line, curve line and circles.Brand | REXBETI #ad |
Manufacturer | REXBETI #ad |
Part Number | 43398-52264 |
Model | REX003 |
More information #ad
10. Midwest Tool & Cutlery
#ad
MWT-6510C, MIDWEST Aviation Snip Set, Left and Right Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips
#adMidwest Tool & Cutlery #ad - Longest lasting cutting edge - These blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.Easy cutting - compound leverage multiplies handle force to cutting blades by 8: 1 for significantly less fatigue. Made in usa. 2 piece offset set - this set includes both left and right cut offset models for optimal cutting ability.
More information #ad
Comfortable grips - kush'n-power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. Strongest handles - high tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power.Brand | Midwest Tool & Cutlery #ad |
Manufacturer | Midwest Tool and Cutlery #ad |
Height | 11 Inches |
Length | 1 Inches |
Weight | 1.94 Pounds |
Width | 6.5 Inches |
Part Number | MWT-6510C |
Model | MWT-6510C |
More information #ad