Top 10 CNC Bits 1/4 Shank – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

1/4 inch Shank 3 inch OVL HRC55 Solid Carbide End Mill for Wood Cut Carving Engrave, SpeTool Extra Long Spiral Router Bit Down Cut 1/8 inch Cutting Diameter

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral downcut router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPLS-D1/4-H1/8-D

2. Freud

#ad

Freud 1/16" Dia. Double Flute Straight Bit with 1/4" Shank 04-096,Red

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 1/16", carbide height h 1/4", 1/4" Shank. Cuts all composite materials, plywoods, hardwoods, and softwoods. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.12 Pounds
Width1 Inches
Part Number04-096
Model04-096

3. EANOSIC

#ad

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

#ad
EANOSIC #ad - Spiral bits used for side milling, finish machining, mortises, etc. This provides longevity and produces cutting results of the highest quality. The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp.

Clean surface, neat, no glitches. Solid carbide and nano blue coated: the up and down cut spiral router bit is made of solid carbide. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. And also for carbon steel, soft alloy steel, tool steel, cast iron, OAK, MDF, aluminum alloy.

The router bit suit for CNC router and any plunge routers with 1/4" collet. Up & down cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. End mill bits can smoothly upcut and downcut groove and slots, end milling, cycles and dados with clean edge and bottom, better than straight bits.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberE2106

4. SpeTool

#ad

SpeTool 1/16 inch Cuting Diameter Spiral UP Cut Router Bit with 1/4 inch Shank 2 Flute Plunge CNC End Mill

#ad
SpeTool #ad - Industrial quality control to ensure best performance. Solid carbide spiral up cut router bit with 1/4inch shank and 1/16inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/16-U

5. BINSTAK

#ad

CNC Spoilboard Surfacing Router Bits, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK Carbide, 1/4 inch Shank 1 inch Cutting Diameter

#ad
BINSTAK #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine. Versatile routing tool: this professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.

High quality cnc surfacing router bit: the sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. This cnc router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time.

3 wings wood cnc router bit: shank: 1/4”; Cut Diameter:1”; Cut Length: 1/4”. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. Great replacement bit tool for woodworking carpenter! Use range for cnc routing bits: suitable for solid woods, MDF, plywood compact panel, particle board, laminate, acrylic and etc. Avoid cutting metal and non-wood materials.
BrandBINSTAK #ad
ManufacturerNITOMAK #ad
Part NumberBK-191028

6. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

7. SpeTool

#ad

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

#ad
SpeTool #ad - For cnc, carving soft and hard wood, Engraving machine woodworking, plywood, MDF, stainless steel, titanium alloy etc. The carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter. Include 2*carbide end mills 1 pc v-groove end mill, 1pcs tapered end mill, 2*Spiral router bit 1 pc up cut, 1 pc down cut. The carbide end mill suit for cnc router, bosch, xcarve and Makita, and Any Brand Plunge Router with 1/4" Collet. Long service life, Decreasing the times of changing cutters, Saving production time.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Length10 Centimeters
Part NumberWD-1
ModelWD-1

8. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

9. SpeTool

#ad

SpeTool Spiral Router Bits Up&Down Compression Bit 1/8 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Carving Engraving Grinding

#ad
SpeTool #ad - Industrial quality control to ensure best performance. Up&down solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1inch cutting length, 2-1/2 inch extra long for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-U&D

10. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving, SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter

#ad
SpeTool #ad - Solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. For plywood, oak, mdf, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/8-U