Top 10 Center Drill Countersink Bit – Countersink Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. Naiyong


Naiyong Tools 5 Lathe Mill Center Drill Countersink Bit Tooling Set, Titanium Plated CPM, M35 HSS 5% Cobalit Contained

Naiyong #ad - Top quality cobalt plated. Different from traditional hss - no segregation, hardness, fine grains and fine carbides; good hot workability;Good grindability;The heat treatment deformation is small; good mechanical properties toughness, high temperature hardness;Expanded the high-speed steel alloy content and created new super-hard high-speed steel; Expanded areas of use.

Quality guarantee- If there is any issues please contact with us immediately. 5 size in the package : # 1. 5 ,# 2, # 3, # 4, # 5 and 60° tip angles. It can replace cemented carbide tool in cutting operation with large impact load. Top quality powder Metallurgy hss. The cutting tool made by powder metallurgy high-speed steel has better performance than ordinary high-speed steel, and its service life is higher than that of ordinary high-speed steel generally 2~3 times.
BrandNaiyong #ad
ManufacturerNaiyong #ad
Part Numbercenter drill

2. Aimeiya


High Speed Steel Center Drill Bits Kit Countersink Tools for Lathe Metalworking, 7 pcs 60-Degree Angle Center Drill Bits in Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0, Center Drill Bits Set

Aimeiya #ad - Easy to store and portable - the countersink lathe mill tools come with a storage case, which is easy to store and convenient to take, and we are very happy to either provide a Refund or a Replacement on your purchase after 45-days ordering, please feel free to contact us if you have any issues about the lathe mill center drill.

High quality material - our center drill bit is made of high quality material, which is solid, also enhance wear resistance and remove chippings clearly. Multiple sizes - it comes with 7 pcs center drill bits set, they are in size 1. 0 1. 5 2. 0 2. 5 3. 0 4. 0 5. 0, which can meet your different needs. Multifunction applications - the center drill bit can work with lathe machines to drill holes in mold steel, Carbon Steel, thread mold and other tough material, Alum, cast iron, Wood, it will improve the the efficiency of drilling.

60 degree tip angle - the center drill tip is accurate 60 degree, which can be used to process the centering hole and countersink of general material. It will be your great helper in drilling accurate centering holes.
BrandAimeiya #ad
ManufacturerAimeiyat #ad
Part NumberAMY-17



7 Pieces Center Drill Bits Set, M2 High Speed Steel 60-Degree Angle Center Drill Bits Kit Countersink Tools for Lathe Metalworking Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0

DKIBBITH #ad - Accurate: a 60-degree angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.

Worry free: this center drill bits set comes with a portable storage case for convenient use and store. Widely applicable: work with lathe machines and most electronic drills to drill holes in Steel, Alum, Iron, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB. If you encounter any problems with the products, please feel free to contact us. High quality: our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant. Wide range of sizes: including 7 pieces of plain center drill Bits Set range in size 1. 0 1. 5 2. 0 2. 5 3. 0 4. 0 5. 0 to meet different needs.
ManufacturerDKIBBITH #ad
Weight80 Grams
Part NumberDKVVT-002

4. Anytime Tools


Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set

Anytime Tools #ad - Top quality M2 HSS. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Sizes 1, 2, 4 and 5, 3, 60° tip angles.
BrandAnytime Tools #ad
ManufacturerAnytime Tools #ad
Part NumberAT200536

5. Drill America


DMO Series, Drill America-DMOCCD2-60 2 Solid Carbide Combined Drill Bit and Countersink

Drill America #ad - Used for producing center holes in work pieces which require machining between centers. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
BrandDrill America #ad
ManufacturerDrill America #ad
Height2 Inches
Length6 Inches
Weight0.02 Pounds
Width4 Inches
Part NumberDMOCCD2-60



HHIP 5000-0032#3 High Speed Steel Center Drill and Countersink, 1/4" Body Diameter, 4" OAL, 7/64" Drill Diameter

HHIP #ad - Made of ground high speed steel. Body diameter is 1/4". Drill diameter is 7/64". Ground from solid. 60 degree countersink angle fits all standard centers.
BrandHHIP #ad
ManufacturerABS Import Tools, Inc. #ad
Height6 Inches
Length3 Inches
Weight0.04 Pounds
Width1 Inches
Part Number5000-0032



COMOWARE Countersink Drill Bit Set- 7 Pcs Counter Sinker Drill Bits for Wood, 1/4''-3/4'', 1/4'' Hex Shank, 5 Flute 90 Degree Center Punch Tool, High Speed Steel, Quick Change

COMOWARE #ad - Premium quality: made of industrial grade high carbon steel. Excellent punch: perfect helper Center Punch, Marks workpiece with a dimple to prevent screws and drills from wandering.

Professional design: 1/4 inch hex shank, fits most power tools. Widely used: great for wood openings, aluminum board, particle board, chamfering, screw head and so on. Suitable for wooden planks, fiberboard, plywood, reaming, plastic, PVC board and other various soft material chamfer. Titanium coated, Durable & Long service life. Package includes: 6 pcs drill bits size:6 mm1/4'', 9 mm3/8'', 16 mm5/8'', 12 mm1/2'', 8 mm5/16'', 19 mm3/4''; 1pcs Center Punch. All have 90 degree on the point for sharp and precise countersinking.
ManufacturerCOMOWARE #ad



HHIP 5000-2125 60 Degree High Speed Steel Combined Drill and Countersink, 4, 1/8" Drill Diameter, 5/16" Body Diameter, 2-1/8" OAL

HHIP #ad - Ground from solid. Plain style. Used for centering work ends, where the work piece is to be revolved on machine centers. 60 degree countersink angle fits all standard centers. Made of high speed steel and ground from solid.
BrandHHIP #ad
ManufacturerABS Import Tools, Inc. #ad
Height6 Inches
Length3 Inches
Width1 Inches
Part Number5000-2125



5PC M2HSS Combined Center Drills Countersinks 60 Degree Angle Bit Set

LLDSIMEX #ad - Each drill has a double end and is ground with a standard 60 degree included angle. Material: high Quality HSSM2. Standard 60 degree included angle, Used in making starter holes. It includes 1 each of sizes #1, #3, #2, #4 and #5. Contained in a convient reusable case.
ManufacturerLLDSIMEX #ad
Part NumberB07SDNTGGT

10. Accusize Industrial Tools


3560-1001, 4'' Oal All Length of Each Drill, Accusize Industrial Tools 5 pc H.S.S. M2 Long Series Center Drill Set

Accusize Industrial Tools #ad - High speed Steel. A fitted plastic case - by Rose Plastic. No. 1 1/8" x 3/64" x 4" oal; no. 2 3/16" x 5/64" x 4" oal; no. 3 1/4" x 7/64" x 4" oal; no. 4 5/16" x 1 /8" x 4" oal; no. 5 7/16" x 3/16" x 4" oAL. Right hand included angle 60°. 5pcs set contain:.
BrandAccusize Industrial Tools #ad
ManufacturerAccusize Co., Ltd. #ad
Height1.18 Inches
Length3.54 Inches
Weight0.15 Kilograms
Width4.72 Inches
Part Number3560-1001