Top 10 Bora Centipede Ck15s – Power Tool Stands

As an Amazon Associate I earn from qualifying purchases.

1. Bora

#ad

CK15S, Collapsible Steel Legs, Bora Centipede 4x8 15-Strut Work Stand and Portable Table | XL Sawhorse Support with Folding

#ad
Bora #ad - Comeplete kit - the full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag.

Work height - the working height is 30 inches tall: large enough to lay a 4ft x 8ft wood board on top. The wider sizes allow you to complete 2 jobs at once. When the job is done, it conveniently folds up for easy storage and transport. Versatile functionality - choose from 4 sizes, ck6s, ck12s and ck15S. Saw-horse solution - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site.

Instant set up – this stand is ready to use right out of the box, no Assembly required. The larger the base, CK9S, the more weight the table can hold. It’s expandable by simply adding risers not included for an increased working height. It takes just seconds to set up. It supports up to 6, 000 pounds of power tools and machinery.
BrandBora #ad
ManufacturerBora Centipede #ad
Height38 Inches
Length9 Inches
Weight31 Pounds
Width15 Inches
Part NumberCK15S
ModelCK15S
WarrantyManufacturer Warranty

2. Bora Portamate

#ad

Collapsible Steel Legs, CK15S, Bora Portamate Speedhorse Sawhorse Pair– Two Pack & Bora Centipede 4x8 15-Strut Work Stand and Portable Table | XL Sawhorse Support with Folding

#ad
Bora Portamate #ad - Unlike standard sawhorses, so It doesn't matter which leg is folded first. The larger the base, CK6S, the more weight the table can hold. Product 1: fast tear down: to tear down your worksite, these have non-sequential legs, just pull the levers on each end and fold the legs up. Come ready to out of the box with no assembly is needed to use.

Product 2: work height - the working height is 30 inches tall: large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers not included for an increased working height. It supports up to 6, 000 pounds of power tools and machinery. Product 1: longer, pre-drilled top: the pre-drilled metal top allows you to screw in 2x4's as makeshift brackets to a worktop. A working height of 30 inches tall puts your project within easy reach. More than the leading competitors. Product 1: best-in-class capacity: these sawhorses can support up to 1500 lbs each, which means a hefty 3000 lbs together! This is 200 lbs.

Product 1: set-up in 1. 6 seconds: the bora speedhorse is the only sawhorse on the market with lever quick-release deploy technology, offering instant setup and teardown that is 30x faster than conventional sawhorses. Product 2: comeplete kit - the full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag.
BrandBora Portamate #ad

3. Bora

#ad

Includes 4 X-Cups, 2 Quick Clamps, Carry Bag, CTC6, Bora Centipede Tall 2ft x 4ft x 36in Portable Work Stand

#ad
Bora #ad - And durable enough for long lasting use. Room for accessories: p-tops feature 360-degree rotational spin and can accommodate all Centipede accessories to expand worksite capabilities.

Heavy duty: struts will absorb the impact from heavy objects - up to 2, 500 lbs. Protective p-tops: durable polymer p-Tops at each point of contact won’t mark the surface of your project or let saw blades cause potential damage to struts. No assembly needed: folds up to 6" X 9" X 38" and instantly expands to a 2ft x 4ft workstation. Tall work height: 36” height is taller than other Centipede models, reducing strain on the lower back for taller users.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height36 Inches
Length24 Inches
Weight15.75 Pounds
Width48 Inches
Part NumberCTC6
ModelCTC6
Warrantyone year - limited

4. Bora

#ad

Includes 4 X-Cups, Portable Work Support Sawhorse, 4 Quick Clamps, Bora Centipede 4ft x 4ft 9-Strut Work Table, CK9S,Black/Orange, Carry Bag

#ad
Bora #ad - Versatile functionality - choose from 4 sizes, ck12s and ck15s. It takes just seconds to set up. Ck22t talbe top - now available for a portable work top option with 3/4-inch bench dog holes. Complete kit - the full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag.

Saw-horse solution - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site. Instant set up – this tool is ready to use right out of the box, no Assembly required. The wider sizes allow you to complete 2 jobs at once. It’s expandable by simply adding risers not included to increase the working height and it supports up to 3, 500 pounds of power tools and machinery.

The larger the base, ck9s, CK6S, the more weight the table can hold. Depending on the size of your centipede workstand, you may need more than one Tabletop for full coverage. Work height - the working height is 30 inches tall: large enough to lay a 4ft x 8ft wood board on top. Ck6s needs 1, ck9s needs 2, CK15S needs 4. When the job is done, it conveniently folds up for easy storage and transport.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height30 Inches
Length48 Inches
Weight19 Pounds
Width48 Inches
Part NumberCK9S
ModelCK9S
WarrantyOne year - Limited

5. Bora

#ad

Bora Centipede 2 Piece Hooks Set for Bora Centipede Work Stands, CA0402

#ad
Bora #ad - Bench dog holes. Carries heavy weight with sufficient load on the unit. Fits in standard 3/4 in. Designed for bora centipede work stands CK4S, CK6S, CK9S, CK15S. Set includes 2 Hooks. Easy installation – slide up through p-top sold separately, rotate and drop in. Keep tools out of the way and close at hand.
BrandBora #ad
ManufacturerBora Centipede #ad
Height8.5 Inches
Length5.5 Inches
Width2.5 Inches
Part NumberCA0402
ModelCA0402

6. Bora

#ad

CA0606, 6-Pc Non-Slips Set For Bora Centipede Work Stands

#ad
Bora #ad - Low profile solution for holding materials in place. Bench dog holes. Set includes 6 Non-Slips. Fits in standard 3/4 in. Fits into p-tops on top of each strut on Bora Centipede work stands. Designed for the bora centipede work stands: CK4S, CK6S, CK9S, CK15S.
BrandBora #ad
ManufacturerHTC #ad
Height8.5 Inches
Length5.5 Inches
Width2.5 Inches
Part NumberCA0606
ModelCA0606
WarrantyOne Year

7. Bora

#ad

Collapsible Steel Legs, Bora Centipede 2x4 Feet Work Stand and Portable Table | Sawhorse Support with Folding, CK6S

#ad
Bora #ad - Depending on the size of your centipede workstand, you may need more than one Tabletop for full coverage. The larger the base, CK6S, the more weight the table can hold. Saw-horse solution - made of heavy duty steel construction, The centipede is a fold-able work stand that can be set up as a large portable workbench at any job site.

It takes just seconds to set up. Ck22t table top - now available for a portable work top option with 3/4-inch bench dog holes. When the job is done, it conveniently folds up for easy storage and transport. It’s expandable by simply adding risers not included to increase the working height and it supports up to 2, 500 pounds of power tools and machinery. Perfect working height - the working height is 30 inches tall: large enough to lay a 4ft x 8ft wood board on top.

Versatile functionality - choose from 4 sizes, ck9s, ck12s and ck15S. Quick set up – this stand is ready to use right out of the box, no Assembly required. Ck6s needs 1, ck9s needs 2, CK15S needs 4. Complete kit- the full set comes with the following accessories: 2 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag. The wider sizes allow you to complete 2 jobs at once.
BrandBora #ad
ManufacturerHTC #ad
Height38 Inches
Length6 Inches
Weight12.5 Pounds
Width9 Inches
Part NumberCK6S
ModelCK6S
Warrantyone year

8. Bora

#ad

Bora Centipede 3 Piece P-Tops Set, CA0103, Accessory for Bora Centipede Work Stands

#ad
Bora #ad - Standard 3/4″ nut Included for easy replacement. Works on all bora centipede work stands CK6S, CK12S, CK9S, CK15S. Protects load, cutting blade and struts from damage. Spins 360° for convenient positioning of other Bora Centipede accessories. Set includes 3 pieces.
BrandBora #ad
ManufacturerBora Centipede #ad
Height8.5 Inches
Length5.5 Inches
Width2.5 Inches
Part NumberCA0103
ModelCA0103
WarrantyManufacturer Warranty

9. Bora

#ad

CA0202, BORA Centipede 2x4 Support Bracket 2-Piece Set For BORA Centipede Work Stands

#ad
Bora #ad - Fits standard 3/4 in. Allows for quick cuts without clamping. Quick setup for traditional sawhorse applications. Fits standard 2×4 boards. Designed for the bora centipede work stands CK4S, CK6S, CK9S, CK15S. Bench dog holes.
BrandBora #ad
ManufacturerBora Centipede #ad
Height8.5 Inches
Length5.5 Inches
Width2.5 Inches
Part NumberCA0102
ModelCA0202
WarrantyManufacturer Warranty

10. Bora

#ad

CK12S Work Stand, Bora Centipede 4ft x 6ft 12-Strut Work Support and Portable Sawhorse with accessories

#ad
Bora #ad - It takes mere seconds to set up, and when the job is done it conveniently folds up and can be stored in the Centipede Carry Bag. Versatile functionality- p-tops feature 360-degree rotational spin and can accommodate all additional Centipede accessories to expand worksite capabilities and add additional functionality to your work support.

Create a workbench table- centipede ck12s pairs perfectly with the CK22T Centipede Workbench Tabletop, to create a more flexible workstation. Ready to use right out of box, no set up required. Durable polymer p-tops- patented p-tops at each point of contact will not mark the surface of your project or let saw blades cause potential damage to struts.

Heavy-duty – steel struts are flexible to absorb the impact from heavy objects and machinery, and durable enough to ensure long-lasting, smooth operation. Throw and go- instantly set up a portable 4ft x 6ft workstation or workbench table.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height30 Inches
Length48 Inches
Weight27 Pounds
Width72 Inches
Part NumberCK12S
ModelCK12S
WarrantyManufacturer Warranty