Top 10 Allen Socket Set GEARWRENCH – Socket Sets

As an Amazon Associate I earn from qualifying purchases.

1. GEARWRENCH

 #ad

80742, 3/8 Inch & 1/2 Inch Drive Bit Socket Set, Hex/Ball End Hex/Tamper Proof Torx/E-Torx/Torx, GEARWRENCH 84 Piece 1/4 Inch, SAE/Metric

#ad
GEARWRENCH #ad - Large hard stamped size identification. Includes blow molded case. Heat treated socket bases for durability. Hex bit sockets meet or exceed ASME B107. 1. 1/4inch, 3/8inch and 1/2 inch drive standard and long hex/Ball End Hex/Tamper Proof Torx /E Torx /Torx SAE/Metric Bit Socket Set. Professional, full polish chrome.
BrandGEARWRENCH #ad
ManufacturerGearWrench #ad
Height3.54 Inches
Length9.84 Inches
Weight0.78 Pounds
Width13.78 Inches
Part Number80742
Model80742
WarrantyStandard Limited Lifetime

2. GEARWRENCH

 #ad

Metric, 80580, GEARWRENCH 12 Pc. 3/8" Drive Hex Bit Socket Set

#ad
GEARWRENCH #ad - Chrome Sockets. Slide socket rail. Heat treated socket bases for durability and serviceability. Large hard stamped identifications.
BrandGEARWRENCH #ad
ManufacturerGearWrench #ad
Height1.5 Inches
Length15.5 Inches
Weight0.1 Pounds
Width3.5 Inches
Part Number80580
Model80580
WarrantyLifetime

3. GEARWRENCH

 #ad

82537, GEARWRENCH 7 Pc. 3/8" Drive Long Length Hex Bit Socket Set, SAE

#ad
GEARWRENCH #ad - Made in the USA. Perfect when the extreme force or torque of a sledge is necessary to loosen or tighten large fasteners. Offset, round handle design to avoid obstructions. Handle length permits use in confined areas. Meets or exceeds us federal Spec. Large striking surface gives you more efficient hammer contact for applying force to the fastener. Ggg-w-636e. Manufactured from alloy steel and heat-treated for greater strength and durability. Designed to remain engaged with the fastener when the wrench is struck.
BrandGEARWRENCH #ad
ManufacturerApex Tool Group #ad
Height11.81 Inches
Length4.72 Inches
Weight1.76 Pounds
Width1.18 Inches
Part Number82537
Model82537
WarrantyStandard Limited Lifetime

4. GEARWRENCH

 #ad

GEARWRENCH 8 Pc. 3/8" Drive Long Ball End Hex Bit Socket Set, Metric, 80573

#ad
GEARWRENCH #ad - Heat treated socket bases for durability and serviceability, chrome sockets. Sizes: 3mm to 10MM. Large hard stamped identifications. Slide socket rail.
BrandGEARWRENCH #ad
ManufacturerGearWrench #ad
Height1.5 Inches
Length12 Inches
Weight1.59 Pounds
Width7.7 Inches
Part Number80573
Model80573
WarrantyLifetime

5. GEARWRENCH

 #ad

Metric, 82554, GEARWRENCH 6 Pc. 3/8" Drive Long Length Hex Bit Socket Set

#ad
GEARWRENCH #ad - Metric Sockets. S2 steel insert Bits for Maximum Strength. Increased length hex Bit for Additional Access to Hard to Reach Fasteners. Double line sae and knurled metric Ring To Easily Identify Standard vs. Large hard stamped identification. Full polish chrome Socket Base Cleans Easily and Resists Corrosion. Socket meets or Exceeds Specifications. Heat treated Socket Bases for Added Strength.
BrandGEARWRENCH #ad
ManufacturerApex Tool Group #ad
Height11.81 Inches
Length4.72 Inches
Weight0.93 Pounds
Width1.18 Inches
Part Number82554
Model82554
WarrantyStandard Limited Lifetime

6. GEARWRENCH

 #ad

3/8" & 1/2" Drive Bit Socket Set, E-Torx & Torx, Standard Hex, SAE/Metric, 80726, GEARWRENCH 36 Pc. 1/4"

#ad
GEARWRENCH #ad - Impact-resistant slide rail system stores bit sockets. Heat treated socket bases for durability and serviceability. Chrome Sockets. Holding system forces bit surface to opposing side for maximum retention and strength.
BrandGEARWRENCH #ad
ManufacturerGearWrench #ad
Height2.2 Inches
Length11.5 Inches
Weight4 Pounds
Width8.6 Inches
Part Number80726
Model80726
WarrantyLifetime

7. GearWrench

 #ad

SAE/Metric, 890040, GEARWRENCH 39 Pc. 1/4" & 3/8" Drive Pass-Thru Bit Socket Set, Standard Hex/Slotted/Phillips/Torx

#ad
GearWrench #ad - High-visibility laser etched markings provide quick size identification. Off-corner loading design for reduced fastener rounding.

Included components: 1 each hex: 1/16 in 5/64 in 3/32 in 7/64 in 1/8 in 9/64 in 5/32 in 3/16 in 7/32 in 1/4 in 5/16 in 3/8 in 2mm 2. 5mm 3mm 4mm 5mm 6mm 7mm 8mm 10 mm phillips: #1 #2 #3 slotted: 1/8 in 3/16 in 1/4 in torx: t8 t10 T15 T20 T25 T27 T30 T40 T45 T47 T50 T55. Flex socket design provides more access to fasteners in tight confines. Manganese phosphate finish to resist corrosion. Chrome molybdenum alloy steel Cr-Mo for exceptional strength and durability.
BrandGearWrench #ad
ManufacturerGEARWRENCH #ad
Height2.25 Inches
Length13 Inches
Weight1 Pounds
Width7.25 Inches
Part Number890040
Model890040
WarrantyNo Warranty

8. GearWrench

 #ad

80574, GEARWRENCH 7 Pc. 3/8" Drive Long Ball End Hex Bit SAE Socket Set

#ad
GearWrench #ad - Chrome Sockets. Full lifetime warranty. Slide socket rail. Large hard stamped identifications. Heat treated socket bases for durability and serviceability.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Height12.01 Inches
Length1.38 Inches
Weight1.13 Pounds
Width3.86 Inches
Part Number80574
Model80574
WarrantyLifetime

9. GEARWRENCH

 #ad

GEARWRENCH 7 Pc. 3/8" Drive Mid-Length Hex Bit Socket Set, SAE, 82529

#ad
GEARWRENCH #ad - Heat treated Socket Bases for Added Strength. S2 steel insert Bits for Maximum Strength. Socket meets or Exceeds Specifications. Large hard Stamped Identification. Double line sae and knurled metric Ring To Easily Identify Standard vs. Metric Sockets. Increased length hex Bit for Additional Access to Hard to Reach Fasteners. Full polish chrome Socket Base Cleans Easily and Resists Corrosion.
BrandGEARWRENCH #ad
ManufacturerApex Tool Group #ad
Height11.81 Inches
Length4.72 Inches
Weight0.7 Pounds
Width1.18 Inches
Part Number82529
Model82529
WarrantyStandard Limited Lifetime

10. GEARWRENCH

 #ad

84948N, GEARWRENCH 39 Piece 1/2inch Drive 6 Point Impact Socket Set, Standard & Deep, Metric

#ad
GEARWRENCH #ad - Secondary hard stamping of part number and size. Off corner loading design reduces fastener rounding. Manganese Phosphate coating to resist corrosion. Made from chrome molybdenum alloy steel Cr-Mo for exceptional strength and durability. High visibility laser etched markings for quick size identification. Includes blow mold case with reinforced steel hinges and steel buckles for strength and security. Parallel neck down design on 3/8 inches, 1/2 inches, 7/16 inches, and 9/16 inches sizes for improved access to restricted fasteners.
BrandGEARWRENCH #ad
ManufacturerApex Tool Group #ad
Height13.8 Inches
Length18.9 Inches
Weight1.1 Pounds
Width3.7 Inches
Part Number84948N
Model84948N
WarrantyStandard Limited Lifetime

Tags: